DataSheet39.com

What is HC0480A03?

This electronic component, produced by the manufacturer "Yantel", performs the same function as "Hybrid Coupler".


HC0480A03 Datasheet PDF - Yantel

Part Number HC0480A03
Description Hybrid Coupler
Manufacturers Yantel 
Logo Yantel Logo 


There is a preview and HC0480A03 download ( pdf file ) link at the bottom of this page.





Total 10 Pages



Preview 1 page

No Preview Available ! HC0480A03 datasheet, circuit

HC0480A03
Hybrid Coupler 3 dB, 90o
Rev A0
Description
The HC0480A03 is a low profile, high performance 3dB hybrid coupler
in a new easy to use, manufacturing friendly surface mount package. The
HC0480A03 is design particularly for balanced power and low noise
amplifiers, plus signal distribution and phase balance is required. It can be
used in high power applications up to 125 Watts.
Parts have been subjected to rigorous qualification testing and they are
manufactured using materials with coefficients of thermal expansion(CTE)
compatible with common substrates such as FR4, G-10, RF-35, RO4350
and polymide.
Orientation Marker
Part No.
Signal Pad
GND
Features:
● 435 – 524 MHz
● High Power
● Very Low Loss
● Tight Amplitude Balance
● High Isolation
● Low VSWR
● Good Repeatability
● CTE compatible with FR4, G-10,
RF-35, RO4350B and polyimide
● Immersion gold, prevent surface
oxidation & scratch
● RoHS Compliant
● Tape & Reel Package available
Mechanical Outline
Electrical Specifications
Frequency Isolation
MHz
435 - 524
dB Min
20
Insertion
Loss
dB Max
0.25
VSWR
Max : 1
1.22
Phase
Balance
Degrees
90 ± 3.0
Power
Avg. CW Watts
125
Operating
Temp.
ºC
-55 to +95
Notes:
1. All the above data are based on specified demo board.
2. Insertion loss:Thru board loss has been removed.
Amplitude
Balance
dB Max
± 0.20
TOP VIEW
SIDE VIEW BOTTOM VIEW
Pin 1
Pin 2
2.17
Pin 2
Pin 1
YANTEL
HC0480A03
XXXX
Pin 4
Pin 3
Pin 3
Pin 4
Yantel Corporation
Add Floor 2, Building 2, Gaofa Technology Park, Longjing, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533
For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com

line_dark_gray
HC0480A03 equivalent
HC0480A03
Hybrid Coupler 3 dB, 90o
Rev A0
Definition of Measured Specifications
Parameter
VSWR
(Voltage Standing Wave
Ratio)
Definition
The impedance match of
the coupler to a 50W
system. A VSWR of 1:1 is
optimal.
Mathematical Representation
Vmax
VSWR =
Vmin
Vmax = voltage maxima of a standing wave
Vmin = voltage minima of a standing wave
Return Loss
Insertion Loss
Isolation
Phase Balance
The impedance match of
the coupler to a 50W
system. Return Loss is
an alternate means to
express VSWR.
The input power divided
by the sum of the power
at the two output ports.
The input power divided
by the power at the
isolated port.
The difference in phase
angle between the two
output ports.
VSWR +1
Return Loss (dB)= 20log
VSWR -1
Pin
Insertion Loss(dB)= 10log
P Pcpl + transmission
Pin
Isolation(dB)= 10log
Piso
Phase at coupled port – Phase at transmisson port
Amplitude Balance
The power at each output
divided by the average
power of the two outputs.
Pcpl
Ptransmission
10log
and 10log
( )P + Pcpl transmission
2
( )P + Pcpl transmission
2
Test Method
1. Calibrating your vector network analyzer.
2. Connect the VNA 4 Port to DUT respectively.
3. Measure the data of coupling through port 1 to port 4(S41).
4. Measure the data of transmission through port 1 to port 3(S31).
5. Measure the data of isolation through port 1 to port 2(S21).
6. Measure the data of phase port 4 & port 3(port 1 feeding).
7. Measure the data of return loss port 1, port 2, port 3 & port 4.
8. According to the above data to calculate insertion loss,
amplitude balance & phase.
Note:
1. When calculating insertion loss at room temperature,
demo board loss should be removed from both coupling & transmission data.
Please refer to the below table for demo board loss :
Frequency Range(MHz)
470-860
800-1000
1200-1700
1700-2000
2000-2300
2300-2700
Demo Board Loss (dB) @25
0.07
0.10
0.15
0.15
0.20
0.25
DUT
Vector
Network
Analyzer
Port 1 Port 2 Port 3 Port 4
Yantel Corporation
Add Floor 2, Building 2, Gaofa Technology Park, Longjing, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533
For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HC0480A03 electronic component.


Information Total 10 Pages
Link URL [ Copy URL to Clipboard ]
Download [ HC0480A03.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
HC0480A03The function is Hybrid Coupler. YantelYantel

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

HC04     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search