2.2K3A1IA Datasheet PDF - BetaTHERM
Part Number | 2.2K3A1IA | |
Description | Chip Thermistors | |
Manufacturers | BetaTHERM | |
Logo | ||
There is a preview and 2.2K3A1IA download ( pdf file ) link at the bottom of this page. Total 2 Pages |
Preview 1 page No Preview Available ! BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
Thermistor Configuration
30 AWG Sliver Plated
Copper Lead Wires
With Etched
TFE Telfon Insulation,
Thermally Conductive
Epoxy Coating
12.7mm +/-3.3mm
(0.50Ó +/-0.13Ó)
76.2mm +/-3.3mm
(3.00Ó +/-3.13Ó)
2.413mm
(0.095Ó)
Max. Dia.
Example: BetaCURVE Series II Part Number
10K 3 A 1 I A
Tolerance Classification
Insulated Lead Wires
BetaCURVE Series
Epoxy Coated
Material Curve #
Resistance Value
@
25oC
Applications
¥ Temperature sensing, control and compensation.
¥ P.C. board mounting for over temperature
protection.
¥ Automotive car seat heater control and engine
management.
¥ Assembly into probes for a wide variety of
applications in industrial temperature control and
instrumentation.
Features
¥ Rapid Time Response (1 second typical in liquids).
¥ DC (Dissipation Constant) = 0.85mW/ oC
typical in still air at 25oC.
¥ Min./Max. Temperature Exposure = -80 to 150oC.
¥ Available in custom probe assemblies.
¥ Proven Stability and Reliability.
¥ Teflon Insulated lead wires.
¥ Choice of 4 temperature tolerance classifications:
Tolerance Code:
A
B
C
D
Specification:
+/-0.1oC, 0oC to 70oC
+/-0.2oC, 0oC to 70oC
+/-0.5oC, 0oC to 70oC
+/-1.0oC, 0oC to 70oC
Similar to the BetaCURVE Thermistor Series I, the
Series II thermistors are small epoxy coated devices. The
same quality thermistor elements are used during assembly.
Series II are manufactured using 30 AWG teflon insulated
lead wires. They offer the same choice of precision
temperature tolerance classifications for a wide variety of
customer applications.
The Series II differs from Series I marginally with
respect to D.C. The typical value of 0.85mW/oC in still air
at 25oC is due to the larger lead wire diameter made of pure
copper.
The insulated lead wires offer customers the added
protection of TFE teflon insulation that has the highest
temperature rating (150oC) of the most common insulating
materials. TFE teflon is a material that does not bond easily
with epoxies or adhesives. For this reason the surface of the
teflon wire is etched, which enhances bondability for
applications that require mounting or potting the thermistor
with epoxies or adhesives.
The series is produced in high volume as a
Standard configuration. Other configurations are available
on a custom basis. Larger or smaller lead wires can be used
with the same chip elements and with insulating materials of
PVC, Kynar, Tefzel, Nylon/Polyurethane, etc. Contact
Applications Engineering Group for support if requirements
differ from the standard configuration as shown above.
4 BEATA Komponent AB (SE): Phone: +46 (0)392 360 40, Fax: +46 (0)392 360 41, e-mail: [email protected]
url: www.beta.dk, www.beata.se, www.betafinland.fi, www.betatherm.com
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 2.2K3A1IA electronic component. |
Information | Total 2 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 2.2K3A1IA.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
2.2K3A1IA | The function is Chip Thermistors. BetaTHERM | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
2.2K
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |