DataSheet39.com

What is T491C106K016AS-F?

This electronic component, produced by the manufacturer "CDE", performs the same function as "Solid Tantalum Chip Capacitors".


T491C106K016AS-F Datasheet PDF - CDE

Part Number T491C106K016AS-F
Description Solid Tantalum Chip Capacitors
Manufacturers CDE 
Logo CDE Logo 


There is a preview and T491C106K016AS-F download ( pdf file ) link at the bottom of this page.





Total 5 Pages



Preview 1 page

No Preview Available ! T491C106K016AS-F datasheet, circuit

Type T491 Solid Tantalum Chip Capacitors
Solid Tantalum Chip Capacitors for Surface Mount Applications
Highlights
Low DF and DC Leakage
Temperature Stable
260 ºC for 10 Seconds Soldering
Meets IECQ Standard
QC300801/US0001
Meets EIA Standard 535BAAC
The T491 Series’ physical outline and dimen-
sions conform to the global standard for tanta-
lum capacitor chips, and the T491 exceeds the
requirements of EIA standard 535BAAC. T491
chips are specifically for automated surface
mount processes and equipment. The termina-
tions are 100% Matte-Tin. Reliability and
thermal stability are assured by lead-frame at-
tachments to the tantalum pellet made by micro-
processor-controlled welding and a high tem-
perature silver epoxy adhesive. Standard pack-
aging is compatible with all tape-fed placement
units and with EIA RS- 481-1 tape and reel speci-
fication.
Specifications
Capacitance Range: 0.10 µF to 330 µF
Voltage Range: 4 Vdc to 50 VDC
Tolerance: ±10% standard, ±20% available
Operating Temperature: –55 ºC to +125 ºC (with proper derating)
Cap Change From Initial Limit: –10% @ –55 ºC; +10% @ +85 ºC;
+12% @ +125 ºC
DC Leakage: At 25 ºC — See Ratings
At 85 ºC — 10 x 25 ºC limit
At 125 ºC — 12 x 25 ºC limit
Dissipation Factor: 0.1 µF to 1.0 µF — 4%
1.5 µF to 68 µF — 6%
100 µF to 330 µF — 8%
Standard Packaging Tape and Reel: EIA RS-481-1
Complies with the EU Directive
2002/95/EC requirement
restricting the use of Lead (Pb),
Mercury (Hg), Cadmium (Cd),
Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB)
and PolyBrominated Diphenyl
Ethers (PBDE).
Case
Code
S
T
A
B
C
D
X
EIA
IECQ
3216L
3528L
3216
3528
6032
7343
7343H
Qty per
7" Reel
2,500
2,500
2,000
2,000
500
500
500
13” Reels Available on Special Order
Width
8mm
8mm
8mm
8mm
12mm
12mm
12mm
Tape
Pitch
4mm
4mm
4mm
4mm
8mm
8mm
8mm
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com

line_dark_gray
T491C106K016AS-F equivalent
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.
4


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for T491C106K016AS-F electronic component.


Information Total 5 Pages
Link URL [ Copy URL to Clipboard ]
Download [ T491C106K016AS-F.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
T491C106K016AS-FThe function is Solid Tantalum Chip Capacitors. CDECDE

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

T491     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search