DataSheet.es    


PDF V260B3-LE2 Data sheet ( Hoja de datos )

Número de pieza V260B3-LE2
Descripción TFT LCD Module
Fabricantes CHIMEI Innolux 
Logotipo CHIMEI Innolux Logotipo



Hay una vista previa y un enlace de descarga de V260B3-LE2 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! V260B3-LE2 Hoja de datos, Descripción, Manual

Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Tentative Specification
Preliminary Specification
Approval Specification
MODEL NO.: V260B3
SUFFIX: LE2
Approved By
Checked By Prepared By
Chao-Chun Chung Vincent Chou Delia Lin
Version 1.0
1 DateΚ14 Apr. 2011
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

1 page




V260B3-LE2 pdf
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal (H)
Module Size Vertical (V)
Weight
Depth (D)
Weight
Min.
612
360
9.3
13.8
Typ.
613
361
10.3
14.8
2610
Max.
614
362
11.3
15.8
Unit Note
mm Module Size
mm
mm To Rear
mm To PCB Protector
g
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth does not include connectors.
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
Symbol
TST
TOP
SNOP
±X, ±Y
±Z
VNOP
Value
Min. Max.
-20 +60
0 50
-
50
50
- 1.0
Note (1) Temperature and relative humidity range is shown in the figure below.
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-Bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing of Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so
that the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10 Storage Range
-40 -20
0 20 40 60 80
Temperature (ºC)
Version 1.0
5 DateΚ14 Apr. 2011
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

5 Page





V260B3-LE2 arduino
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
5. INTERFACE PIN CONNECTION
5.1 TFT LCD MODULE
CNF1 Connector Pin Assignment
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Symbol
VCC
VCC
VCC
VCC
GND
GND
GND
NC
SELLVDS
NC
GND
RX0-
RX0+
GND
RX1-
RX1+
GND
RX2-
RX2+
GND
RXCLK-
RXCLK+
GND
RX3-
RX3+
GND
NC
NC
NC
GND
Description
Power supply: +12V
Power supply: +12V
Power supply: +12V
Power supply: +12V
Ground
Ground
Ground
No connection
Select LVDS data format
No connection
Ground
Negative transmission data of pixel 0
Positive transmission data of pixel 0
Ground
Negative transmission data of pixel 1
Positive transmission data of pixel 1
Ground
Negative transmission data of pixel 2
Positive transmission data of pixel 2
Ground
Negative of clock
Positive of clock
Ground
Negative transmission data of pixel 3
Positive transmission data of pixel 3
Ground
No connection
No connection
No connection
Ground
Note (1) Connector Part No.: P-TWO, 187053-30091 or compatible
The pin order of LVDS connector is defined as follows
Note
(3)
(2),(4)
(3)
(3)
(3)
(3)
Note (2) Low = Open or connect to GND: VESA Format, High = Connect to +3.3V: JEIDA Format.
Please refer to 5.5 LVDS INTERFACE
Note (3) Reserved for internal use. Please left it open.
Version 1.0
11 DateΚ14 Apr. 2011
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet V260B3-LE2.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
V260B3-LE1TFT LCD ModuleCHI MEI
CHI MEI
V260B3-LE2TFT LCD ModuleCHIMEI Innolux
CHIMEI Innolux

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar