UTS1E101MPD Datasheet PDF - Nichicon
Part Number | UTS1E101MPD | |
Description | Aluminum Electrolytic Capacitor | |
Manufacturers | Nichicon | |
Logo | ||
There is a preview and UTS1E101MPD download ( pdf file ) link at the bottom of this page. Total 2 Pages |
Preview 1 page No Preview Available ! ALUMINUM ELECTROLYTIC CAPACITORS
TS Miniature Sized,
High Reliability For Switching Power Supplies
series
Smaller case size and Long Life product.
Compliant to the RoHS directive (2002/95/EC).
PS Long Life
TS
Approved by Reliability Center for Electronic
Component, Japan-Certification No. RCJ-03-23C
Specifications
ltem Performance Characteristics
Category Temperature Range – 40 to +105˚C
Rated Voltage Range
6.3 to 50V
Rated Capacitance Range 0.1 to 470µF
Capacitance Tolerance
± 20% at 120Hz, 20˚C
Leakage Current
Tangent of loss angle (tan δ)
After 2 minutes' application of rated voltage, leakage current is less than 0.03CV or 3 (µA), whichever is greater.
Rated voltage (V)
tan δ (MAX.)
6.3
0.30
10
0.28
16
0.24
Measurement frequency : 120Hz, Temperature : 20˚C
25 35 50
0.18
0.16
0.14
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50
Stability at Low Temperature Impedance ratio
Z– 25°C / Z+20°C
5
4
3
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
10
8
6
4
3
3
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after the rated voltage is applied
for 5000 hours at 105˚C.
Capacitance change Within ±30% of the initial capacitance value
tan δ
300% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking
Printed with white color letter on dark blown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
L+ MAX.
Pressure relief vent
(φ8up)
(L = 7) 1.0
(L 9) 1.5
15MIN
4MIN
(mm)
φD 4 5 6.3 8
P 1.5 2.0 2.5
φd
0.45
0.45
0.5
(0.45)
( ) : Applied to 7mmL products
3.5
0.6
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 25V 100µF)
1 2 3 4 5 6 7 8 9 10 11
UTS 1E 1 0 1 M PD
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
4
5 DD
6.3
8 PD
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (100µF)
Rated voltage (25V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for UTS1E101MPD electronic component. |
Information | Total 2 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ UTS1E101MPD.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
UTS1E101MPD | The function is Aluminum Electrolytic Capacitor. Nichicon | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
UTS1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |