E8F2-A01C Datasheet PDF - Omron
Part Number | E8F2-A01C | |
Description | Digital Pressure Sensor | |
Manufacturers | Omron | |
Logo | ||
There is a preview and E8F2-A01C download ( pdf file ) link at the bottom of this page. Total 22 Pages |
Preview 1 page No Preview Available ! Digital Pressure Sensor
E8F2
Pressure Sensor with
Easy-to-Read LED Display
■ Pressure status can be checked at a glance
from the red digital pressure value and analog
bar displays.
■ Measurement pressure is averaged by the
chattering prevention function to prevent
incorrect outputs due to momentary pressure
changes.
■ The automatic teaching function teaches
pressure values for good and bad products.
■ Industry’s smallest models at just 28 × 28 ×
29 mm.
Be sure to read Safety Precautions
on page 6.
Ordering Information
Sensors
Pressure range
Positive pressure
Negative pressure
0 to 100 kPa
0 to 1 MPa
0 to −101 kPa
ON/OFF output
Open collector
(two independent outputs)
Linear output
1 to 5 V
NPN output
E8F2-A01C
E8F2-B10C
E8F2-AN0C
Model
PNP output
E8F2-A01B
E8F2-B10B
E8F2-AN0B
Accessories (Order Separately)
Appearance
Name
Model
Remarks
Mounting Bracket E89-F3
Provided with the E8F2.
Panel-mounting
Bracket
E89-F4
Spacer provided.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
1
|
|
Nomenclature
(1)
(4)
(5)
E8F2
(2)
(3)
(6) (7) (8)
Display Panel
(1) Bar Indicator (Green)
Indicates the degree of measured pressure in relation to the set
pressure.
(2) Numeric and Menu Display (Red)
Indicates measurement values and setting menu items.
(3) Unit indicator (Green)
Indicates the unit used for detection. The unit indicated on the
indicator is the one currently set.
(4) OUT1 Indicator (Orange)
Lit when OUT1 is turned ON.
(5) OUT2 Indicator (Orange)
Lit when OUT2 is turned ON.
Operation Keys
(6) Up Key, (7) Down Key
x Used to select or change the set items, set contents, and set values
in setting mode.
x Press either key to check the ON and OFF points in measurement
mode. The values are reset by pressing both keys simultaneously.
x Use together with the SET Key for setting the Sensor to a special
setting mode or energy-saving mode.
(7) SET SET Key
x Used for entering the set contents and set values in setting mode.
x Used for setting the Sensor to basic setting mode or pressure
setting mode.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for E8F2-A01C electronic component. |
Information | Total 22 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ E8F2-A01C.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
E8F2-A01B | The function is Digital Pressure Sensor. Omron | |
E8F2-A01C | The function is Digital Pressure Sensor. Omron | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
E8F2
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |