|
|
Número de pieza | SSL21083 | |
Descripción | Compact non-dimmable LED driver IC | |
Fabricantes | NXP Semiconductors | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SSL21083 (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
No Preview Available ! SSL21081/SSL21083
Compact non-dimmable LED driver IC
Rev. 5 — 11 October 2012
Product data sheet
1. General description
The SSL21081/SSL21083 are a range of high-voltage Integrated Circuits (ICs) for driving
LED lamps in general mains non-dimmable lighting applications.
The main benefits of these products are:
• Small Printed-Circuit Board (PCB) footprint, and compact solution
• High efficiency (up to 95 %)
• Ease of integration
• Low electronic Bill Of Material (BOM)
These ICs incorporate a 300 V or 600 V MOSFET.
The ICs work as boundary conduction mode converters, typically in buck configuration.
The IC range has been designed to start up directly from the HV supply by an internal
high-voltage current source. Thereafter, the dV/dt supply is used with capacitive coupling
from the drain, or any other auxiliary supply. This function provides full flexibility in the
application design. The IC consumes 1.3 mA of supply current with an internal clamp
limiting the supply voltage.
The ICs provide accurate output current control with LED current accuracy within 5 %.
The ICs can be operated using Pulse-Width Modulation (PWM) current regulation and has
many protection features including easy LED temperature feedback.
2. Features and benefits
LED driver ICs for driving LED strings from a rectified mains supply
High-efficiency switch mode buck driver product family:
SSL21081AT/SSL21081T: drivers with integrated 300 V (DC) power switches
SSL21083AT/SSL21083T: drivers with integrated 600 V (DC) power switches
Controller with power-efficient boundary conduction mode of operation with:
No reverse recovery losses in freewheel diode
Zero Current Switching (ZCS) for turn-on of switch
Zero voltage or valley switching for turn-on of switch
Minimal required inductance value and size
Direct PWM current regulation possible
Fast transient response through cycle-by-cycle current control:
Negligible AC mains ripple at LED current and minimal total capacitor value
1 page NXP Semiconductors
7. Pinning information
7.1 Pinning
SSL21081/SSL21083
Compact non-dimmable LED driver IC
HV 1
SOURCE 2
VCC 3
NTC 4
8 DRAIN
7 GND
IC
6 GND
5 DVDT
001aan702
Fig 2. SSL21081/SSL21083 pin configuration (SO8)
7.2 Pin description
Table 4. Pin description
Symbol
Pin (SO8)
HV 1
SOURCE
2
VCC
3
NTC
4
DVDT
5
GND
6, 7
DRAIN
8
Description
high-voltage supply pin
low-side internal switch
supply voltage
LED temperature protection input
AC supply pin
ground
high-side internal switch
SSL21081_SSL21083
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 11 October 2012
© NXP B.V. 2012. All rights reserved.
5 of 22
5 Page NXP Semiconductors
SSL21081/SSL21083
Compact non-dimmable LED driver IC
8.8 Heat sink
The copper of the PCB acts as the heat sink for SSL21081/SSL21083 applications.
Equation 1 shows the relation between the maximum allowable power dissipation P and
the thermal resistance from junction to ambient.
Rthj – a = Tjmax – Tamb P
(1)
Where:
Rth(j-a) = thermal resistance from junction to ambient
Tj(max) = maximum junction temperature
Tamb = ambient temperature
P = power dissipation
SSL21081_SSL21083
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 11 October 2012
© NXP B.V. 2012. All rights reserved.
11 of 22
11 Page |
Páginas | Total 22 Páginas | |
PDF Descargar | [ Datasheet SSL21083.PDF ] |
Número de pieza | Descripción | Fabricantes |
SSL21081 | Compact non-dimmable LED driver IC | NXP Semiconductors |
SSL21081AT | Compact non-dimmable LED driver IC | NXP Semiconductors |
SSL21081T | (SSL21081T - SSL21084T) GreenChip drivers | NXP Semiconductors |
SSL21082AT | Mains dimmable LED driver IC | NXP Semiconductors |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |