DataSheet39.com

What is T-51512D121J-FW-A-AC?

This electronic component, produced by the manufacturer "OPTREX", performs the same function as "LCD Module".


T-51512D121J-FW-A-AC Datasheet PDF - OPTREX

Part Number T-51512D121J-FW-A-AC
Description LCD Module
Manufacturers OPTREX 
Logo OPTREX Logo 


There is a preview and T-51512D121J-FW-A-AC download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! T-51512D121J-FW-A-AC datasheet, circuit

Type No.
LCD Module Technical Specification
T-51512D121J-FW-A-AC
First Edition
Sep 30, 2004
Final Revision
******
Approved by (Quality Assurance Division)
Checked by (ACI Engineering Division)
M.Noguchi
Prepared by (ACI Engineering Division)
No. Item
-- CONTENTS
1 APPLICATION
2 OVERVIEW
3 ABSOLUTE MAXIMUM RATINGS
4 ELECTRICAL CHARACTERISTICS
5 INTERFACE PIN CONNECTION
6 INTERFACE TIMING
7 BLOCK DIAGRAM
8 MECHANICAL SPECIFICATION
9 OPTICAL CHARACTERISTICS
10 RELIABILITY TEST CONDITION
11 INSPECTION STANDARDS
12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
-- PACKAGING SPECIFICATION
-- PRODUCTS NUMBER LABELING FORMS
-- LAMP UNIT FOR 12.1” SVGA
Page
1
2
3
4
4
7
9
12
13
15
17
18
19
22
26
28
T-51512D121J-FW-A-AC (AC) No. 2004-0135
OPTREX CORPORATION
Page 1/33

line_dark_gray
T-51512D121J-FW-A-AC equivalent
[Note]
1) Lamp Current measurement method (The current meter is inserted in low voltage line.)
LCD
Module
CTL
CTH
CTH
A
Inverter
Power
Supply
2) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and
this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep
inverter as far from module as possible or use electronic shielding between inverter and module
to avoid the interference.
3) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value,
or when the starting lamp voltage does not meet the value specified in this table.
4) The life time of the backlight depends on the ambient temperature. The life time will decrease
under low/high temperature.
5) Please use the inverter which has symmetrical current wave form as follows,
The degree of unbalance: less than 10%
The ratio of wave height: less than 2 ±10%
IPH IPH: High side peak The degree of unbalance = |IPH - IPL| / Irms × 100(%)
IPL IPL: Low side peak The ratio of wave height = IPH(or IPL) / Irms
CURRENT WAVE FORM
A) Power and signals sequence:
t1 10 ms
0 < t2 50 ms
0 < t3 50 ms
400 ms t4
200 ms t5
0 t6
0.9VCC
0.1VCC
VCC
data
0.9VCC
0.1VCC 0.1VCC
t1 t2
Backlight
t3
t4
t5 t6
data: RGB DATA, DCLK, HD, VD, DENA
T-51512D121J-FW-A-AC (AC) No. 2004-0135
OPTREX CORPORATION
Page 5/33


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for T-51512D121J-FW-A-AC electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ T-51512D121J-FW-A-AC.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
T-51512D121J-FW-A-ABThe function is LCD_Module. OPTREXOPTREX
T-51512D121J-FW-A-ACThe function is LCD Module. OPTREXOPTREX
T-51512D121J-FW-A-AEThe function is LCD_Module. OPTREXOPTREX

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

T-51     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search