|
|
PDF AG-AC160P Data sheet ( Hoja de datos )
| Número de pieza | AG-AC160P | |
| Descripción | Memory Card Camera-Recorder Operating Instructions | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AG-AC160P (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
This product is eligible for the AVCCAM
3 Year Warranty Repair Program. For
details, see page 9 of vol.1.
Operating Instructions Vol.2
Memory Card Camera-Recorder
2Volume
AG-AC160PModel No.
AG-AC160EJ
AG-AC160EN
Note that Operation Instructions Vol.2 describes advanced
operations of the Memory Card Camera-Recorder.
For instructions on basic operations of the Memory Card Camera-
Recorder, refer to Operating Instructions Vol.1 (printed documents)
contained in the supplied CD-ROM.
Before operating this product, please read the instructions carefully and save this manual for
future use.
M0811SI0 -YI
ENGLISH
VQT3T51A
1 page  
Shooting
Using the viewfinder
This camera utilizes a viewfinder with a miniature
LCD, and a 3.45-inch LCD monitor.
Use them according to application and shooting
conditions.
••Brightness and hue of images in the viewfinder
and the LCD monitor may sometimes differ from
those on a TV monitor.
Check final images with a TV monitor.
Using the viewfinder
1 Turn the POWER/MODE switch of the
camera <ON> (Page 30 of Vol.1), and check
that images appear in the viewfinder.
2 Position the screen of the viewfinder where
it is easiest to see.
The viewfinder can be raised to about 90°
perpendicular to the camera.
3 Adjust the diopter adjustment dial so that
you can see the characters on the finder
screen clearly.
Diopter adjustment dial
• Less than 0.01% of the pixels in the LCD may
not light or remain on all the time. They are
not defective, and will have no effect on the
images you record.
• Screen burn-in may occur in the LCD monitor,
however, this is not a defect.
Viewfinder
••Do not leave the eyepiece of the viewfinder
pointed in the direction of the sun or strong
light sources.
Internal components may be damaged or fire
may be caused if light is focused through the
lens.
• When the LCD monitor is open, the viewfinder
may not display anything. Close the LCD
monitor. (Page 70)
5
5 Page 
O
Switching AVCHD mode/DV mode
1 Turn the POWER/MODE switch of the
camera <ON>. (Page 30 of Vol.1)
2 Press the <MENU> button.
3 Select [AVCHD] or [DV] in the [HD/SD
MODE] item on the setup menu [RECORDING
SETUP] screen.
4 If the message [TURN POWER OFF] is
displayed, switch off the power and switch it
on again.
The mode is switched by turning the power on
again.
• For how to turn the power on and off, see
page 30 of vol.1.
• When you switch to AVCHD mode, <HD>
indicator lights in blue.
• When you switch to DV mode, <HD>
indicator is turned off.
Shooting in Auto mode
1 Turn the POWER/MODE switch of the
camera <ON>. (Page 30 of Vol.1)
• Make sure the mode lamp <CAMERA> is lit
in red.
2 Set the <AUTO/MANU> switch to <AUTO>.
• [ ] is displayed at the top of the LCD monitor
and in the viewfinder.
• In accordance with setting of items on the
setup menu [AUTO SW] screen, focus,
gain, iris, and white balance are adjusted
automatically.
In Auto mode, the face detection function can
be used by assigning [FACE DETECT] to
a USER button. This function automatically
detects faces, focuses on them, and adjusts
the brightness to an appropriate level. When
[FACE DETECT] is set, [ ] appears on the
screen.
High-priority frames with orange borders
appear on the faces that are large or near
the center, and gray frames appear on
the others. Up to 15 detected frames are
displayed on the screen.
If [PRIMARY] is set in the [FACE FRAMING]
item of the setting menu [SW MODE] screen,
only the high-priority orange frames are
displayed.
• The [FACE DETECT] function is released in
the following cases.
- When setting the <AUTO/MANU> switch to
<MANU> position
- When switched to <PB> mode
- When turning off the power of the camera
• The [FACE DETECT] function can be set
even when setting the <AUTO/MANU>
switch to <MANU> position. [ ] will be
displayed on the screen.
3 Press the <START/STOP> button to start
shooting.
• Press the <START/STOP> button again to
pause shooting.
• When shooting at a low angle, it is
convenient to use the <START/STOP>
button on the side of the handle. Locking with
the <HOLD> switch prevents unintentional
operation. (Page 24)
• When the menu screen is displayed, shooting
is not possible. After closing the menu
screen, press the <START/STOP> button.
• When the memory card slot cover is opened
during shooting, shooting stops.
2 AUTO MANU
<REC CHECK> button
<START/STOP>
button on the handle
POWER/MODE switch
1
3
Lock release button <START/STOP> button
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet AG-AC160P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AG-AC160EJ | Memory Card Camera-Recorder Operating Instructions | Panasonic |
| AG-AC160EN | Memory Card Camera-Recorder Operating Instructions | Panasonic |
| AG-AC160P | Memory Card Camera-Recorder Operating Instructions | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |