|
|
Número de pieza | AM-320240N1TMQW-TW5HR | |
Descripción | LCD Module | |
Fabricantes | Ampire | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AM-320240N1TMQW-TW5HR (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Preliminary
The contents of this document are confidential and must not be disclosed wholly or in part
to any third part without the prior written consent of AMPIRE CO., LTD
SPECIFICATIONS FOR
LCD MODULE
CUSTOMER
CUSTOMER PART NO.
AMPIRE PART NO. AM-320240N1TMQW-TW5H(R)
APPROVED BY
DATE
; Approved For Specifications
Approved For Specifications & Sample
AMPIRE CO., LTD.
Building D., 2F., No.88, Sec. 1, Sintai 5th Rd., Sijhih City,
Taipei County 221, Taiwan (R.O.C.)
台北縣汐止市新台五路一段 88 號 2 樓(東方科學園區 D 棟)
TEL:886-2-26967269 , FAX:886-2-86967196 or 26967270
APPROVED BY
CHECKED BY
ORGANIZED BY
Date : 2008/4/29
AMPIRE CO., LTD.
1
1 page Preliminary
The contents of this document are confidential and must not be disclosed wholly or in part
to any third part without the prior written consent of AMPIRE CO., LTD
4 Electrical specification
4.1 Absolute max. ratings
4.1.1 Electrical Absolute max. ratings
Item
Symbol Condition Min.
Max.
Power voltage VDD VSS=0 -0.3
5.5
Input voltege
V inB B
Note1: /CS,/WR,/RD,RS,DB0~DB7
-0.3 VDD+0.3
4.1.2 Environmental Absolute max. ratings
Item
OPERATING
MIN MAX
STORAGE
MIN MAX
Unit Remark
V
V Note 1
Remark
Temperature
-20
70
-30
80
Note2,3,4,5,6,7
Humidity
Note1
Note1
Corrosive Gas Not Acceptable Not Acceptable
Note1 : Ta <= 40℃ : 85% RH max
Ta > 40℃ : Absolute humidity must be lower than the humidity of
85%RH at 40℃
Note2 : For storage condition Ta at -30℃ < 48h , at 80℃ < 100h
For operating condition Ta at -20℃ < 100h
Note3 : Background color changes slightly depending on ambient
temperature. This phenomenon is reversible.
Note4 : The response time will be slower at low temperature.
Note5 : Only operation is guarantied at operating temperature. Contrast ,
response time, another display quality are evaluated at +25℃
Note6 :
z LED BL : When LCM is operated over 40℃ ambient temperature, the
ILEDB B of the LED back-light should be follow :
Date : 2008/4/29
AMPIRE CO., LTD.
5
5 Page Preliminary
The contents of this document are confidential and must not be disclosed wholly or in part
to any third part without the prior written consent of AMPIRE CO., LTD
Note 4.Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Photo detector output when LCD is at ”White” state
Contrast ratio(CR)= Photo detector Output when LCD is at “Black” state
Note
5:White
V =Vi i50B B
B
+1.5V
B
Black
V =Vi i50B B
B
+2.0V
B
“±”means that the analog input signal swings in phase with VCOMB B signal.
“ “ means that the analog input signal swings out of phase with VCOMB B
signal.
Vi50B B : The analog input voltage when transmission is 50%.The 100%
Transmission is defined as the transmission of LCD panel when all the
Input terminals of module are electrically opened.
Note 6.Definition of viewing angle,Refer to figure as below.
Date : 2008/4/29
AMPIRE CO., LTD.
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet AM-320240N1TMQW-TW5HR.PDF ] |
Número de pieza | Descripción | Fabricantes |
AM-320240N1TMQW-TW5H | LCD Module | Ampire |
AM-320240N1TMQW-TW5HR | LCD Module | Ampire |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |