|
|
PDF MS21266 Data sheet ( Hoja de datos )
| Número de pieza | MS21266 | |
| Descripción | Grommet / Plastic / Edging | |
| Fabricantes | Genuine Aircraft Hardware | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MS21266 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
Genuine Aircraft Hardware Co.
MS21266
Grommet, Plastic, Edging
.067
+.005
-.010
.067
+.005
-.010
All original Text, Tables, and
Drawings are Copyright 1994-2006
reproduction by permission only.
12.750"
12.620"
B
D
C
A
REQUIREMENTS:
1. MATERIALS:
NYLON PER SPECIFICATION MIL-M-20693. TYPE 1.
POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION L-P-403.
(3) POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION L-P-389.
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN INCHES.
3. THE GOVERNMENT SHALL ACQUIRE AND STOCK EDGING GROMMETS IN 12.750-12.620 LENGTHS. (3)
4. THE INSTALLING ACTIVITY SHALL FABRICATE GROMMETS FROM THE PARTS TO BE STOCKED.
5. EDGING GROMMETS ARE TO BE USED FOR ODD SHAPE HOLES IN ADDITION TO THE CIRCULAR HOLE SIZES SPECIFIED IN ABOVE TABLE.
6. MAXIMUM ALLOWABLE END GAP AFTER EDGING GROMMET IS INSTALLED FLUSH AGAINST HOLE PERIPHERY IS .025 INCH.
7. FOR POSITIVE POSITIONING IN ODD SHAPE HOLES APPLY ARMSTRONG TYPE A-12 ADHESIVE CEMENT, OR EQUIVALENT, TO THE
CLEANED EDGES OF THE MATERIAL AND GROMMET.
8. PATENT NOTICE: THE GOVERNMENT HAS A ROYALTY FREE LICENSE FOR GROMMETS UNDER U.S. PATENT APPLICATION SERIAL
NO. 524.070 FOR THE BENEFIT OF MANUFACTURES OF THE ITEM CALLED FOR IN SPECIFICATION MIL-G-22529 AND THIS MILITARY
STANDARD EITHER FOR THE GOVERNMENT OR FOR USE IN EQUIPMENT TO BE DELIVERED TO THE GOVERNMENT.
9. LETTERS SHALL NOT PROTRUDE BEYOND THE OUTER SURFACE.
ADD “N” AFTER DASH NUMBER FOR NYLON MATERIAL
ADD “T” AFTER DASH NUMBER FOR (TFE) MATERIAL
ADD “F” AFTER DASH NUMBER FOR (FEP) MATERIAL
(3)
EXAMPLE OF PART NUMBER:
MS21266 -2N GROMMET OF NYLON MATERIAL FOR .052-.085 SHEET THICKNESS.
MS21266 -2T GROMMET OF (TFE) MATERIAL FOR .052-.085 SHEET THICKNESS.
(3) MS21266 -2F GROMMET OF (FEP) MATERIAL FOR .052-.085 SHEET THICKNESS.
10. POLYTETRAFLUOROETHYLENE (TFE) GROMMETS SHALL BE SUPPLIED ETCHED AFTER DECEMBER 16, 1977.
11. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION AMS 3651 IS INACTIVE FOR DESIGN AFTER DECEMBER 16, 1977.
ADDITIONAL NOTES:
• PROCUREMENT SPECIFICATION: MIL-G-22529
• SUPERSEDES: MS21266 (WEP)
• THIS INFORMATION FROM MILITARY STANDARD MS21266 H PAGE 1 of 1, REVISED JUNE 15, 1981, SOME DETAILS MAY HAVE BEEN
OMITTED FOR CLARITY.
194 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet MS21266.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MS21266 | Grommet / Plastic / Edging | Genuine Aircraft Hardware |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |