FM0H103ZF Datasheet PDF - KEMET
| Part Number | FM0H103ZF | |
| Description | Supercapacitors | |
| Manufacturers | KEMET | |
| Logo |  |
|
|
There is a preview and FM0H103ZF download ( pdf file ) link at the bottom of this page. Total 19 Pages | ||
Preview 1 page No Preview Available !
Supercapacitors
FM Series
Overview
FM Series Supercapacitors, also known as Electric Double-
Layer Capacitors (EDLCs), are intended for high energy storage
applications.
Applications
Supercapacitors have characteristics ranging from traditional
capacitors and batteries. As a result, supercapacitors can be
used like a secondary battery when applied in a DC circuit.
These devices are best suited for use in low voltage DC hold-up
applications such as embedded microprocessor systems with
flash memory.
Benefits
• Rectangular case
• Wide range of temperature from -25°C to +70°C (all types
except FMR) and -40°C to +85°C (FMR type)
• Maintenance free
• 3.5 VDC, 5.5 VDC, and 6.5 VDC
• Highly reliable against liquid leakage
• Lead-free and RoHS Compliant
• Leads can be transverse mounted
Part Number System
FM
Series
FM
FME
FML
FMR
FMC
0H 223
Maximum
Operating Voltage
Capacitance Code (F)
0V = 3.5 VDC
0H = 5.5 VDC
0J = 6.5 VDC
First two digits
represent significant
figures. Third digit
specifies number of
zeros.
Z
Capacitance
Tolerance
Z = -20/+80%
F
Environmental
F = Lead-free
TP
Tape Type
TP = AMMO
-L1 = Transverse
mounting
Blank = Bulk
16
Height
(excluding lead)
16 = 16 mm
18 = 18 mm
Blank = Bulk
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
One world. One KEMET
S6012_FM • 3/7/2014 1
|
| |
 
Supercapacitors – FM Series
Specifications – All Types Except FMR
Item
Category Temperature Range
Maximum Operating Voltage
Capacitance
Capacitance Allowance
ESR
Current (30 minutes value)
FM 5.5 V Type, 3.5 V Type,
6.5 V Type, FMC Type
-25ºC to +70ºC
5.5 VDC, 3.5 VDC, 6.5 VDC
Refer to Table 1
+80%, -20%
Refer to Table 1
Refer to Table 1
Capacitance > 90% of initial ratings
Surge
ESR ≤ 120% of initial ratings
Current (30
minutes value)
≤ 120% of initial ratings
Appearance No obvious abnormality
Characteristics
in Different
Temperature
Vibration
Resistance
Capacitance
ESR
Capacitance
ESR
Capacitance
ESR
Current (30
minutes value)
Capacitance
ESR
Current (30
minutes value)
Capacitance
ESR
Current (30
minutes value)
Appearance
Phase
2
Phase
3
Phase
5
≥ 50% of initial value
≤ 400% of initial value
≤ 200% of initial value
Satisfy initial ratings
≤ 1.5 CV (mA)
Phase
6
Within ±20% of initial value
Satisfy initial ratings
Satisfy initial ratings
Satisfy initial ratings
No obvious abnormality
Solderability
Over 3/4 of the terminal should be
covered by the new solder
Solder Heat
Resistance
Capacitance
ESR
Current (30
minutes value)
Appearance
Satisfy initial ratings
No obvious abnormality
FML Type, FME Type
-25ºC to +70ºC
5.5 VDC
Refer to Table 1
+80%, -20%
Refer to Table 1
Refer to Table 1
> 90% of initial ratings
≤ 120% of initial ratings
≤ 120% of initial ratings
No obvious abnormality
Test Conditions
(conforming to JIS C 5160-1)
Refer to “Measurement Conditions”
Refer to “Measurement Conditions”
Measured at 1 kHz, 10 mA; See also
“Measurement Conditions”
Refer to “Measurement Conditions”
Surge voltage:
Charge:
Discharge:
Number of cycles:
Series resistance:
Discharge
resistance:
Temperature:
4.0 V (3.5 V type)
6.3 V (5.5 V type)
7.4 V (6.5 V type)
30 seconds
9 minutes 30 seconds
1,000
0.010 F
1500 Ω
0.022 F
560 Ω
0.033 F
510 Ω
0.047 F
300 Ω
0.068 F
240 Ω
0.10 F
150 Ω
0.22 F
56 Ω
0.33 F
51 Ω
0Ω
70 ±2ºC
Phase
2
Phase
3
Phase
5
≥ 50% of initial value
≤ 400% or less than initial value
≤ 200% of initial value
Satisfy initial ratings
≤ 1.5 CV (mA)
Conforms to 4.17
Phase 1:
Phase 2:
Phase 4:
Phase 5:
Phase 6:
+25 ±2ºC
-25 ±2ºC
+25 ±2ºC
+70 ±2ºC
+25 ±2ºC
Phase
6
Within ±20% of initial value
Satisfy initial ratings
Satisfy initial ratings
Satisfy initial ratings
Conforms to 4.13
Frequency: 10 to 55 Hz
Testing Time: 6 hours
No obvious abnormality
Over 3/4 of the terminal should be
covered by the new solder
Satisfy initial ratings
Conforms to 4.11
Solder temp: +245 ±5ºC
Dipping time: 5 ±0.5 seconds
1.6 mm from the bottom should be dipped.
Conforms to 4.10
Solder temp: +260 ±10ºC
Dipping time: 10 ±1 seconds
No obvious abnormality
1.6 mm from the bottom should be dipped.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
S6012_FM • 3/7/2014 5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for FM0H103ZF electronic component. |
| Information | Total 19 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ FM0H103ZF.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| FM0H103ZF | The function is Supercapacitors. KEMET | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
FM0H
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||