DataSheet.es    


PDF G220SVN01.0 Data sheet ( Hoja de datos )

Número de pieza G220SVN01.0
Descripción WSXGA+ Color TFT-LCD
Fabricantes AUO 
Logotipo AUO Logotipo



Hay una vista previa y un enlace de descarga de G220SVN01.0 (archivo pdf) en la parte inferior de esta página.


Total 27 Páginas

No Preview Available ! G220SVN01.0 Hoja de datos, Descripción, Manual

Avnet Embedded.
With you every step of the way.
Datasheet
G220SVN01.0
Date: October 2012
www.avnet-embedded.eu
If you require a touch panel solution.
For information on touch sensors, sensor driving and touch panel bonding
solutions, scan the QR code or click the URL
www.avnet-embedded.eu/products/displays/.html

1 page




G220SVN01.0 pdf
Product Specification
AU OPTRONICS CORPORATION
G220SVN01.0
1. Operating Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
7) Do not open or modify the Module Assembly.
8) In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, take it easily, or the TFT Module may be damaged.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary.
At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to
the TFT Module from outside. Otherwise the TFT Module may be damaged.
11) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
12) Severe temperature condition may result in different luminance, response time and LED life time.
13) The data on this specification sheet is applicable when LCD module is placed in landscape position.
14) Continuous displaying fixed pattern may induce image sticking. It is recommended to use screen saver or
shuffle content periodically if fixed pattern is displayed on the screen.
document version 0.1
www.avnet-embedded.eu
4

5 Page





G220SVN01.0 arduino
Product Specification
AU OPTRONICS CORPORATION
G220SVN01.0
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item
Logic/LCD Drive Voltage
Symbol
VDD
Min
-0.3
Max
+5.5
4.2 Absolute Ratings of Environment
Item
Operating Temperature
Operation Humidity
Storage Temperature
Storage Humidity
Note: Maximum Wet-
Symbol
TOP
HOP
TST
HST
Min
0
5
-20
8
Max
+50
90
+60
90
Unit
[Volt]
Unit
[oC]
[%RH]
[oC]
[%RH]
Operating Range
document version 0.1
www.avnet-embedded.eu
Storage Range
10

11 Page







PáginasTotal 27 Páginas
PDF Descargar[ Datasheet G220SVN01.0.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
G220SVN01.0WSXGA+ Color TFT-LCDAUO
AUO

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar