SFH610A Datasheet PDF - Vishay
Part Number | SFH610A | |
Description | Optocoupler | |
Manufacturers | Vishay | |
Logo | ||
There is a preview and SFH610A download ( pdf file ) link at the bottom of this page. Total 9 Pages |
Preview 1 page No Preview Available ! www.vishay.com
Alternative Device Available
SFH610A, SFH6106
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
SFH610A
A1
C2
4E
3C
SFH6106
A1
4E
C2
3C
i179056
DESCRIPTION
The SFH6 10A (D IP) and S FH6106 (SMD ) fe ature a high
current transfer ra tio, low co upling ca pacitance an d h igh
isolation volta ge. These c ouplers h ave a Ga As in frared
diode emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a pl astic
DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage a nd clearance distan ces of > 8.0 mm a re
achieved with option 6. This version comp lies with
IEC 60 950 (DIN VDE 0 805) for re inforced i nsulation up to
an oper ation voltage of 40 0 VRMS or DC. Speci fications
subject to change.
FEATURES
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Lead (Pb)-free component
• Material cat egorization: Fo r def initions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52 744 syste m code H or J, double
protection
• DIN EN 60747-5-5 (VDE 0884) available with option 1
• CSA 93751
• BSI IEC 60950; IEC 60065
ORDERING INFORMATION
PART
REMARKS
SFH610A-1
SFH610A-2
SFH610A-3
SFH610A-4
SFH610A-5
SFH6106-1
SFH6106-2
SFH6106-3
SFH6106-4
SFH6106-5T
SFH610A-1X006
SFH610A-1X018T
SFH610A-2X006
SFH610A-3X006
SFH610A-3X007
SFH610A-4X006
CTR 40 % to 80 %, DIP-4
CTR 63 % to 125 %, DIP-4
CTR 100 % to 200 %, DIP-4
CTR 160 % to 320 %, DIP-4
CTR 250 % to 500 %, DIP-4
CTR 40 % to 80 %, SMD-4
CTR 63 % to 125 %, SMD-4
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, SMD-4
CTR 250 % to 500 %, SMD-4, tape and reel
CTR 40 % to 80 %, DIP-4 400 mil
CTR 40 % to 80 %, SMD-4 400 mil, wide leadspread
CTR 63 % to 125 %, DIP-4 400 mil
CTR 100 % to 200 %, DIP-4 400 mil
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, DIP-4 400 mil
Note
• For additional information on the available options refer to option information.
Rev. 2.2, 23-May-13
1 Document Number: 83666
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
http://www.Datasheet4U.com
|
|
www.vishay.com
Alternative Device Available
SFH610A, SFH6106
Vishay Semiconductors
SAFETY AND INSULATIO RATINGS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Climatic classification
(according to IEC 68 part 1)
55/100/21
Comparative tracking index
VIOTM
VIORM
PSO
ISI
TSI
Creepage distance
Clearance distance
standard DIP-4
standard DIP-4
CTI 175
10000
890
7
7
399
V
V
400 mW
275 mA
175 °C
mm
mm
Creepage distance
400 mil DIP-4
8
mm
Clearance distance
Insulation thickness,
reinforced rated
400 mil DIP-4
per IEC 60950 2.10.5.1
8
0.4
mm
mm
Note
• As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
I F R L = 75 Ω
VCC = 5 V
IC
IF
1. 0 k Ω
VCC = 5 V
isfh610a_01
47 Ω
Fig. 1 - Linear Operation (without saturation)
isfh610a_02
47 Ω
Fig. 3 - Switching Operation (with saturation)
%
103
IC 5
IF
102
5
IF = 10 mA, VCC = 5.0 V
4
3
2
1
101
- 25
isfh610a_03
0 25
TA (°C)
50
75
Fig. 2 - Current Transfer Ratio (CTR) vs. Temperature
30
Ic mA
IF = 14 mA
IF = 12 mA
20
IF = 10 mA
IF = 8 mA
10 IF = 6 mA
IF = 4 mA
IF = 1 mA
IF = 2 mA
0
01
isfh610a_04
5V 10
5
VCE
Fig. 4 - Output Characteristics (typ.) Collector Current vs.
Collector Emitter Voltage
Rev. 2.2, 23-May-13
5 Document Number: 83666
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SFH610A electronic component. |
Information | Total 9 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Product Image and Detail view | 1. - 5.3 kV TRIOS Optocoupler [ Learn More ] | |
Download | [ SFH610A.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
SFH610 | The function is 2.8KV TRIOS OPTOCOUPLERS HIGH RELIABILITY. Siemens Semiconductor Group | |
SFH610-2 | The function is LOW INPUT CURRENT PHOTOTRANSISTOR. ISOCOM | |
SFH610-2X | The function is LOW INPUT CURRENT PHOTOTRANSISTOR. ISOCOM | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
SFH6
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |