DataSheet39.com

What is BW9910?

This electronic component, produced by the manufacturer "Bruckewell Technology", performs the same function as "High Brightness LED Driver".


BW9910 Datasheet PDF - Bruckewell Technology

Part Number BW9910
Description High Brightness LED Driver
Manufacturers Bruckewell Technology 
Logo Bruckewell Technology Logo 


There is a preview and BW9910 download ( pdf file ) link at the bottom of this page.





Total 14 Pages



Preview 1 page

No Preview Available ! BW9910 datasheet, circuit

BW9910/A High Brightness LED Driver
Features
Efficiency > 90%
Universal rectified 85VAC to 265VAC input range
Constant current LED driver
Applications from a few mA to more than 1.0A
LED string from one to hundreds of diodes
PWM low-frequency dimming via PWM_D pin
Input voltage surge ratings up to 500V
Internal over temperature protection (OTP)
7.5V MOSFET drive – BW9910
10V MOSFET drive – BW9910A
Typical Applications
AC/DC or DC/DC LED Driver applications
RGB backlighting LED Driver
Backlighting of flat panel displays
General purpose constant current source
Signage and decorative LED lighting
Buck/Buck-Boost/Boost LED driver
T8/T9/T10 LED tubes
E26/E27 LED bulbs
Product Description
The BW9910/BW9910A is a PWM high-efficiency LED
driver control IC. It allows efficient operation of high
brightness (HB) LEDs from voltage sources ranging from
85VAC up to 265VAC. The BW9910/BW9910A controls an
external MOSFET at fixed switching frequency up to
300kHz. The frequency can be programmed using a single
resistor. The LED string is driven at constant current rather
than constant voltage, thus providing constant light output
and enhanced reliability. The output current can be
programmed between a few mA and up to more than 1.0A.
The BW9910/BW9910A uses a rugged high voltage
junction isolated process that can withstand an input
voltage surge of up to 500V. Output current to an LED
string can be programmed to any value between zero and
its maximum value by applying an external control voltage
at the linear dimming control input of the
BW9910/BW9910A. The BW9910/BW9910A provides a
low-frequency PWM dimming input that can accept an
external control signal with a duty ratio of 0%~100% and a
frequency of up to a few kHz.
The BW9910A allows wider range of external MOSFET
which has lower RDS(ON) (drain-source on resistance) at
higher VGS. The BW9910/BW9910A is available in SOP-8
and SO8-EP packages.
Typical Application Circuit
© 2012 Bruckewell Technology Corp., Ltd.
1
www.bruckewell-semi.com/
http://www.Datasheet4U.com

line_dark_gray
BW9910 equivalent
BW9910/A High Brightness LED Driver
Functional Block Diagram
© 2012 Bruckewell Technology Corp., Ltd.
5
www.bruckewell-semi.com/


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for BW9910 electronic component.


Information Total 14 Pages
Link URL [ Copy URL to Clipboard ]
Download [ BW9910.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
BW9910The function is High Brightness LED Driver. Bruckewell TechnologyBruckewell Technology
BW9910AThe function is High Brightness LED Driver. Bruckewell TechnologyBruckewell Technology

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

BW99     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search