2417K4A Datasheet PDF - AgereSystems
Part Number | 2417K4A | |
Description | NetLight2417K4A1300nmLaser2.5Gbits/sTransceiver | |
Manufacturers | AgereSystems | |
Logo | ||
There is a preview and 2417K4A download ( pdf file ) link at the bottom of this page. Total 12 Pages |
Preview 1 page No Preview Available ! Data Sheet, Rev. 1
August 2001
NetLight ® 2417K4A 1300 nm Laser
2.5 Gbits/s Transceiver
s TTL signal-detect output
s Low power dissipation
s Single 3.3 V power supply
s LVPECL/CML compatible data inputs and CML
compatible data outputs
s Operating temperature range: 0 °C to
70 °C
s Agere Systems Inc. Reliability and Qualification
Program for built-in quality and reliability
Available in a small form-factor, RJ-45 size, plastic package,
the 2417K4A Transceiver is a high-performance, cost-effec-
tive, optical transceiver for SONET applications.
Features
s SONET SR OC-48, SDH I-16 applications
s High-speed, optical data interface for shelf-to-shelf
interconnect
s Small form factor, RJ-45 size, 10-pin package
s LC duplex receptacle
s Uncooled 1300 nm laser transmitter with automatic
output power control
s Transmitter disable input
s Wide dynamic range receiver with InGaAs PIN
photodetector
Description
The 2417K4A transceiver is a high-speed, cost-effec-
tive optical transceiver intended for 2.488 Gbits/s
shelf-to-shelf optical interconnect applications as well
as SONET SR OC-48 and SDH I-16. The transceiver
features proven Agere Systems optics and is pack-
aged in a narrow-width plastic housing with an LC
duplex receptacle. The receptacle fits into an RJ-45
form factor outline. The 10-pin package pinout con-
forms to a multisource transceiver agreement.
The transmitter features the ability to interface to both
LVPECL and CML differential logic level data inputs.
It also features a TTL logic level disable input. The
receiver features differential CML logic level outputs
and a TTL logic level signal-detect output.
|
|
Data Sheet, Rev. 1
August 2001
NetLight 2417K4A 1300 nm Laser
2.5 Gbits/s Transceiver
Qualification and Reliability
To help ensure high product reliability and customer satisfaction, Agere Systems is committed to an intensive qual-
ity program that starts in the design phase and proceeds through the manufacturing process. Optoelectronic mod-
ules are qualified to Agere Systems internal standards as well as other appropriate industry standards using MIL-
STD-883 test methods and procedures and using sampling techniques consistent with Telcordia Technologies ®
requirements.
In addition, the design, development, and manufacturing facilities of Agere Systems Optoelectronics unit are certi-
fied to be in full compliance with the latest ISO ®-9001 quality system standards.
Electrical Schematic
TRANSMITTER
DRIVER
VEET
TD–
7
10
100 Ω R
TD+ 9
SFF TRANSCEIVER
VCCT 6
VCCR 2
RECEIVER
POST-
AMPLIFIER
RD+
RD–
5
4
SD 3
VEER 1
L2
C4 C5
L1
VCC
C2 C3
C1
L1 = L2 = 1 µH—4. 7 µH*
C1 = C2 = 10 nF†
C3 = 4.7 µF—10 µF
C4 = C5 = 4.7 µF—10 µF
* Ferrite beads can be used as an option.
† For all capacitors, MLC caps are recommended
Figure 3. Power Supply Filtering of SFF Transceiver
1-968(F).a
Agere Systems Inc.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 2417K4A electronic component. |
Information | Total 12 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 2417K4A.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
2417K4A | The function is NetLight2417K4A1300nmLaser2.5Gbits/sTransceiver. AgereSystems | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
2417
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |