DataSheet39.com

What is BLM-203?

This electronic component, produced by the manufacturer "Aerotech", performs the same function as "Linear Motors".


BLM-203 Datasheet PDF - Aerotech

Part Number BLM-203
Description Linear Motors
Manufacturers Aerotech 
Logo Aerotech Logo 


There is a preview and BLM-203 download ( pdf file ) link at the bottom of this page.





Total 5 Pages



Preview 1 page

No Preview Available ! BLM-203 datasheet, circuit

BLM Series
Linear Motors
High output force in an 86.4 mm x 34.3 mm
cross section
Continuous force to 397.6 N (89.4 lb); peak
force to 1590.4 N (357.5 lb)
High-energy rare-earth magnets used in
magnet tracks for high acceleration capability
Non-magnetic forcer coil provides high force
with zero cogging for super-smooth velocity
and position control
Aerotech’s “U-channel” BLM series linear motors are 86.4
mm x 34.3 mm in cross section and have proven ideal for
both high-accuracy and high-throughput applications.
BLM series motors are direct drive and consist of a
noncontacting forcer coil and “U-channel” rare-earth
magnet track. This design eliminates backlash, windup,
wear and maintenance issues associated with ball screws,
belts, and rack and pinions.
The noncontact design of the forcer and magnet track
results in a maintenance-free system.
The compact moving forcer coil assembly contains Hall-
effect devices, and a thermal sensor, and is constructed of
reinforced ceramic epoxy. This ironless design eliminates
eddy-current losses that otherwise would limit speed and
produce additional heat. For highest rms force, optional air
cooling is available. Offering high peak forces in its
standard configuration, BLM motors are available with
special high-power magnets that can increase output force.
The BLM series nonmagnetic forcer eliminates cogging and
magnetic attraction to allow for extremely smooth motion
and very tight velocity and position control. These linear
motors are ideal for any application that requires high levels
of positioning resolution and accuracy. BLM series linear
motors are forgiving to align, easy to assemble, and
keep the magnetic field well-contained. Magnet
tracks are stackable for any travel length. They are
also suited for cleanroom use as they produce no
particulates.
The BLM can be driven using standard Aerotech
brushless amplifiers and controllers to provide a
complete integrated system.
The BLM is shown with Aerotech’s linear motor line.
WORLD HEADQUARTERS: Aerotech, Inc., 101 Zeta Drive, Pittsburgh, PA 15238, USA +1-412-963-7470 Fax: +1-412-963-7459
Aerotech Ltd., Jupiter House, Calleva Park, Aldermaston, Berkshire RG7 8NN, UK +44-118-9409400 Fax: +44-118-9409401
Aerotech GmbH, Südwestpark 90, 90449 Nürnberg, Germany +49-911-9679370 Fax: +49-911-96793720
www.aerotech.com
Free Datasheet http://www.Datasheet4U.com

line_dark_gray
BLM-203 equivalent
BLM Series ORDERING INFORMATION
Ordering Example
BLM
Motor Series
-142
Forcer Coil Length
142 mm, 203 mm, 264 mm, 325 mm, 386 mm
-A
Standard Winding
76 cm (2.5 ft) flying leads std
Brushless Linear Servomotors - BLM Series Compact “U” Channel Forcer Coils
BLM-142-A
Linear motor coil, with HED, air cooling and temperature switch, Fcont = 173.2 N (38.9 lb) @ 20 psi
BLM-203-A
Linear motor coil, with HED, air cooling and temperature switch, Fcont = 251.6 N (56.6 lb) @ 20 psi
BLM-264-A
Linear motor coil, with HED, air cooling and temperature switch, Fcont = 301.7 N (67.8 lb) @ 20 psi
BLM-325-A
Linear motor coil, with HED, air cooling and temperature switch, Fcont = 332.2 N (74.7 lb) @ 20 psi
BLM-386-A
Linear motor coil, with HED, air cooling and temperature switch, Fcont = 397.6 N (89.4 lb) @ 20 psi
BLM Options
-LH
-HF
-UHV
-V
-B
Remove HED sensor from BLM series forcer coil
High-flex cable
Ultra-high vacuum prepared
Vacuum prepared
Optional winding
“U” Channel Magnet Tracks – MT Series for BLM motors
MT240-x
Compact “U” channel magnet track for use with BLM forcer coil, 244 mm (9.6 in) length
MT300-x
Compact “U” channel magnet track for use with BLM forcer coil, 305 mm (12.0 in) length
MT360-x
Compact “U” channel magnet track for use with BLM forcer coil, 366 mm (14.4 in) length
MT420-x
Compact “U” channel magnet track for use with BLM forcer coil, 427 mm (16.8 in) length
MT480-x
Compact “U” channel magnet track for use with BLM forcer coil, 487 mm (19.2 in) length
MT600-x
Compact “U” channel magnet track for use with BLM forcer coil, 610 mm (24.0 in) length
MTx
Custom track lengths available; please consult factory
Note: x = -S or -P (see specification tables for differences)
-HS High strength magnets
WORLD HEADQUARTERS: Aerotech, Inc., 101 Zeta Drive, Pittsburgh, PA 15238, USA +1-412-963-7470 Fax: +1-412-963-7459
Aerotech Ltd., Jupiter House, Calleva Park, Aldermaston, Berkshire RG7 8NN, UK +44-118-9409400 Fax: +44-118-9409401
Aerotech GmbH, Südwestpark 90, 90449 Nürnberg, Germany +49-911-9679370 Fax: +49-911-96793720
www.aerotech.com
Free Datasheet http://www.Datasheet4U.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for BLM-203 electronic component.


Information Total 5 Pages
Link URL [ Copy URL to Clipboard ]
Download [ BLM-203.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
BLM-203The function is Linear Motors. AerotechAerotech

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

BLM-     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search