RS-100-3.3 Datasheet PDF - Mean Well
Part Number | RS-100-3.3 | |
Description | 100W Single Output Switching Power Supply | |
Manufacturers | Mean Well | |
Logo | ||
There is a preview and RS-100-3.3 download ( pdf file ) link at the bottom of this page. Total 2 Pages |
Preview 1 page No Preview Available ! 100W Single Output Switching Power Supply
RS-100 series
¡½ Features :
¡E Universal AC input / Full range
¡E Protections: Short circuit / Overload / Over voltage
¡E Cooling by free air convection
¡E LED indicator for power on
¡E 100% full load burn-in test
¡E All using 105¢J long life electrolytic capacitors
¡E Withstand 300VAC surge input for 5 second
¡E High operating temperature up to 70¢J
¡E Withstand 5G vibration test
¡E High efficiency, long life and high reliability
¡E 3 years warranty
SPECIFICATION
..
MODEL
RS-100-3.3
RS-100-5
RS-100-12
RS-100-15
RS-100-24
RS-100-48
OUTPUT
INPUT
DC VOLTAGE
3.3V 5V
12V 15V 24V
RATED CURRENT
20A
16A
8.5A 7A
4.5A
CURRENT RANGE
0 ~ 20A
0 ~ 16A
0 ~ 8.5A
0 ~ 7A
0 ~ 4.5A
RATED POWER
66W
80W
102W
105W
108W
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
120mVp-p
120mVp-p
120mVp-p
VOLTAGE ADJ. RANGE
3.2V ~ 3.5V
4.75 ~ 5.5V
11.4 ~ 13.2V
14.25 ~ 16.5V
22.8 ~ 26.4V
VOLTAGE TOLERANCE Note.3 ¡Ó 3.0%
¡Ó 2.0%
¡Ó 1.0%
¡Ó 1.0%
¡Ó 1.0%
LINE REGULATION Note.4 ¡Ó 0.5%
¡Ó 0.5%
¡Ó 0.5%
¡Ó 0.5%
¡Ó 0.5%
LOAD REGULATION Note.5 ¡Ó 2.0%
¡Ó 1.0%
¡Ó 0.5%
¡Ó 0.5%
¡Ó 0.5%
SETUP, RISE TIME
500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)
100ms/230VAC 18ms/115VAC at full load
VOLTAGE RANGE
88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
74%
77%
81%
82%
84%
AC CURRENT (Typ.)
2.5A/115VAC 1.5A/230VAC
INRUSH CURRENT (Typ.) COLD START 40A/230VAC
48V
2.3A
0 ~ 2.3A
110.4W
200mVp-p
45.6 ~ 52.8V
¡Ó 1.0%
¡Ó 0.5%
¡Ó 0.5%
84%
LEAKAGE CURRENT
<2mA / 240VAC
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
EMC ISOLATION RESISTANCE
(Note 6) EMC EMISSION
EMC IMMUNITY
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.45V
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V 27.6 ~ 32.4V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-25 ~ +70¢J (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85¢J , 10 ~ 95% RH
¡Ó 0.03%/¢J (0 ~ 50¢J )
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
55.2 ~ 64.8V
OTHERS
NOTE
MTBF
260.8Khrs min. MIL-HDBK-217F (25¢J )
DIMENSION
159*97*38mm (L*W*H)
PACKING
0.6Kg; 24pcs/15.4Kg/0.7CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
File Name:RS-100-SPEC 2012-11-14
Free Datasheet http://www.Datasheet4U.com
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RS-100-3.3 electronic component. |
Information | Total 2 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ RS-100-3.3.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
RS-100-3.3 | The function is 100W Single Output Switching Power Supply. Mean Well | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
RS-1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |