DataSheet39.com

What is ADuM1510?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "5-Channel Unidirectional Digital Isolator".


ADuM1510 Datasheet PDF - Analog Devices

Part Number ADuM1510
Description 5-Channel Unidirectional Digital Isolator
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and ADuM1510 download ( pdf file ) link at the bottom of this page.





Total 12 Pages



Preview 1 page

No Preview Available ! ADuM1510 datasheet, circuit

Data Sheet
5-Channel, Unidirectional Digital Isolator
ADuM1510
FEATURES
RoHS compliant, 16-lead, wide body SOIC package
Low power operation: 5 V
1.3 mA per channel maximum @ 0 Mbps to 2 Mbps
3.3 mA per channel maximum @ 10 Mbps
High temperature operation: 105°C
Up to 10 Mbps data rate (NRZ)
Low default output state
Safety and regulatory approvals
UL recognition: 2500 V rms for 1 minute per UL 1577
APPLICATIONS
General-purpose, unidirectional, multichannel isolation
GENERAL DESCRIPTION
The ADuM15101 is a unidirectional, 5-channel isolator based
on the Analog Devices, Inc., iCoupler® technology. Combining
high speed CMOS and monolithic air core transformer technology,
these isolation components provide outstanding performance
characteristics superior to alternatives such as optocoupler devices.
By avoiding the use of LEDs and photodiodes, iCoupler devices
eliminate the design difficulties commonly associated with
optocouplers. The typical optocoupler concerns regarding
uncertain current transfer ratios, nonlinear transfer functions,
and temperature and lifetime effects are eliminated with the
simple iCoupler digital interfaces and stable performance
characteristics. The need for external drivers and other discrete
components is eliminated with iCoupler products. In addition,
iCoupler devices run at one-tenth to one-sixth the power
consumption of optocouplers at comparable signal data rates.
The ADuM1510 isolator provides five independent isolation
channels supporting data rates up to 10 Mbps. The ADuM1510
operates with the supply voltage of either side ranging from 4.5 V
to 5.5 V. Unlike other optocoupler alternatives, the ADuM1510
isolator has a patented refresh feature that ensures dc correctness in
the absence of input logic transitions and during power-up/
power-down conditions.
1 Protected by U.S. Patents 5,952,849; 6,873,065; and 7,075,329.
FUNCTIONAL BLOCK DIAGRAM
VDD1 1
GND1 2
VIA 3
ADuM1510
ENCODE
VIB 4
ENCODE
DECODE
DECODE
VIC 5
ENCODE
DECODE
VID 6
ENCODE
DECODE
VIE 7
GND1 8
ENCODE
DECODE
Figure 1.
16 VDD2
15 GND2
14 VOA
13 VOB
12 VOC
11 VOD
10 VOE
9 GND2
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2008–2012 Analog Devices, Inc. All rights reserved.
http://www.Datasheet4U.com

line_dark_gray
ADuM1510 equivalent
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Ambient temperature TA = 25°C, unless otherwise noted.
Table 6.
Parameter
Storage Temperature (TST) Range
Ambient Operating Temperature
(TA) Range
Supply Voltages1 (VDD1, VDD2)
Input Voltages1
(VIA, VIB, VIC, VID, VIE)
Output Voltages1
(VOA, VOB, VOC, VOD, VOE)
Average Output Current per Pin2
Side 1 (IO1)
Side 2 (IO2)
Common-Mode Transients3
Rating
−65°C to +150°C
−40°C to +105°C
−0.5 V to +7.0 V
−0.5 V to VDDI + 0.5 V
−0.5 V to VDDO + 0.5 V
−18 mA to +18 mA
−22 mA to +22 mA
−100 kV/μs to +100 kV/μs
1 All voltages are relative to their respective ground.
2 See Figure 3 for maximum rated current values for various temperatures.
3 Refers to common-mode transients across the insulation barrier. Common-
mode transients exceeding the absolute maximum ratings may cause latch-
up or permanent damage.
ADuM1510
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. B | Page 5 of 12
http://www.Datasheet4U.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ADuM1510 electronic component.


Information Total 12 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ADuM1510.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ADuM1510The function is 5-Channel Unidirectional Digital Isolator. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ADuM     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search