|
|
Número de pieza | MAX674 | |
Descripción | +10V Precision Voltage Reference | |
Fabricantes | Maxim Integrated | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MAX674 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! 19-2639; Rev 2; 7/04
+10V Precision Voltage Reference
General Description
The MAX674 is a precision voltage reference that is
pretrimmed to within ±0.15% of 10V. The reference fea-
tures excellent temperature stability (as low as
12.0ppm/°C guaranteed), low current drain, and low
noise. It is supplied in the space-saving narrow SO
package, as well as, the standard 8-pin plastic DIP
package.
Features
♦ Pretrimmed to +10V, ±0.15%
♦ Excellent Temperature Stability: 12ppm/°C
♦ Low Noise: 20µVP-P
♦ Low Supply Current: 1.4mA (max)
♦ Short-Circuit Protected
♦ Load Regulation 0.001%/mA
♦ Pin-for-Pin Compatible with REF01
A/D Converters
D/A Converters
Digital Voltmeters
Voltage Regulators
Threshold Detectors
Applications
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
TEMPCO
(ppm/°C)
INITIAL
ERROR
(mV)
MAX674CPA 0°C to +70°C 8 PDIP
12 15
MAX674CSA
MAX674EPA
0°C to +70°C
8 Narrow
SO
-40°C to +85°C 8 PDIP
12
15
15
15
MAX674ESA
-40°C to +85°C
8 Narrow
SO
15
15
Ordering Information continued at end of data sheet.
Pin Configurations
TOP VIEW
N.C. 1
VIN 2
N.C. 3
GND 4
MAX674
8 N.C.
7 N.C.
6 VOUT
5 TRIM
SO/DIP
Typical Operating Circuit
15V
2
VIN 6
VOUT
OUTPUT
MAX674
5
TRIM
GND
4
RP
10kΩ
Pin Configurations continued at end of data sheet.
REFERENCE WITH TRIMMED OUTPUT
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
http://www.Datasheet4U.com/
1 page +10V Precision Voltage Reference
Pin Configurations (continued)
TOP VIEW
N.C.
8
N.C. N.C.
17
VIN 2
MAX674
6 VOUT
3
N.C.
4
GROUND
(CASE)
5
TRIM
TO-99 METAL CAN
N.C. 1
VIN 2
N.C. 3
GND 4
MAX674
8 N.C.
7 N.C.
6 VOUT
5 TRIM
CERDIP
Chip Topography
VIN
2
6
VOUT
0.57”
1.45mm
0.78”
1.98mm
5
TRIM
4
GND
Ordering Information (continued)
PART
TEMP RANGE
PIN-
TEMPCO
INITIAL
ERROR
PACKAGE (ppm/°C) (mV)
MAX674CTV* 0°C to +70°C 8 TO-99
MAX674ETV* -40°C to +85°C 8 TO-99
MAX674EJA* -40°C to +85°C 8 CERDIP
MAX674MTV* -55°C to +125°C 8 TO-99
MAX674MJA* -55°C to +125°C 8 CERDIP
12
15
15
20
20
15
15
15
15
15
*Contact factory for availability. Not recommended for new
designs.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circu
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
it patent licenses are
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 5
© 2004 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
http://www.Datasheet4U.com/
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet MAX674.PDF ] |
Número de pieza | Descripción | Fabricantes |
MAX670 | Low-Voltage / High-Accuracy / Triple/Quad Voltage P Supervisory Circuits in SOT Package | Maxim Integrated |
MAX670 | Low-Voltage / SOT23 P Supervisors with Power- Fail In/Out / Manual Reset / and Watchdog Timer | Maxim Integrated |
MAX6700 | Low-Voltage / High-Accuracy / Triple/Quad Voltage P Supervisory Circuits in SOT Package | Maxim Integrated |
MAX6700-MAX6710 | Low-Voltage / High-Accuracy / Triple/Quad Voltage P Supervisory Circuits in SOT Package | Maxim Integrated |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |