DataSheet39.com

What is K4B2G1646E?

This electronic component, produced by the manufacturer "Samsung", performs the same function as "2Gb E-die DDR3 SDRAM".


K4B2G1646E Datasheet PDF - Samsung

Part Number K4B2G1646E
Description 2Gb E-die DDR3 SDRAM
Manufacturers Samsung 
Logo Samsung Logo 


There is a preview and K4B2G1646E download ( pdf file ) link at the bottom of this page.





Total 65 Pages



Preview 1 page

No Preview Available ! K4B2G1646E datasheet, circuit

Rev. 1.21, Jun. 2012
K4B2G1646E
2Gb E-die DDR3 SDRAM Only x16
96FBGA with Lead-Free & Halogen-Free
(RoHS compliant)
datasheet
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND
SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All information discussed
herein is provided on an "AS IS" basis, without warranties of any kind.
This document and all information discussed herein remain the sole and exclusive property of Samsung
Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property
right is granted by one party to the other party under this document, by implication, estoppel or other-
wise.
Samsung products are not intended for use in life support, critical care, medical, safety equipment, or
similar applications where product failure could result in loss of life or personal or physical harm, or any
military or defense application, or any governmental procurement to which special terms or provisions
may apply.
For updates or additional information about Samsung products, contact your nearest Samsung office.
All brand names, trademarks and registered trademarks belong to their respective owners.
2012 Samsung Electronics Co., Ltd. All rights reserved.
-1-
Free Datasheet http://www.Datasheet4U.com

line_dark_gray
K4B2G1646E equivalent
K4B2G1646E
datasheet
Rev. 1.21
DDR3 SDRAM
1. Ordering Information
[ Table 1 ] Samsung 2Gb DDR3 E-die ordering information table
Organization DDR3-1066(7-7-7)
DDR3-1333(9-9-9)6 DDR3-1600(11-11-11)5 DDR3-1866(13-13-13)4 DDR3-2133(14-14-14)3 Package
128Mx16 K4B2G1646E-BCF8 K4B2G1646E-BCH9 K4B2G1646E-BCK0 K4B2G1646E-BCMA K4B2G1646E-BCNB 96 FBGA
128Mx16
- K4B2G1646E-BIH9 K4B2G1646E-BIK0 -
- 96 FBGA
128Mx16
- K4B2G1646E-BPH9 K4B2G1646E-BPK0
NOTE :
1. Speed bin is in order of CL-tRCD-tRP.
2. 13th digit stands for below.
"C" : Comercial temp/Normal power
"I" : Industrial temp/Normal power
"P" : Industrial temp/Low power(IDD6 only)
3. Backward Compatible to DDR3-1866(13-13-13), DDR3-1600(11-11-11), DDR3-1333(9-9-9), DDR3-1066(7-7-7)
4. Backward Compatible to DDR3-1600(11-11-11), DDR3-1333(9-9-9), DDR3-1066(7-7-7)
5. Backward Compatible to DDR3-1333(9-9-9), DDR3-1066(7-7-7)
6. Backward Compatible to DDR3-1066(7-7-7)
-
- 96 FBGA
2. Key Features
[ Table 2 ] 2Gb DDR3 E-die Speed bins
Speed
DDR3-800
6-6-6
DDR3-1066
7-7-7
tCK(min)
2.5
1.875
CAS Latency
6
7
tRCD(min)
15
13.125
tRP(min)
15
13.125
tRAS(min)
37.5
37.5
tRC(min)
52.5
50.625
DDR3-1333
9-9-9
1.5
9
13.5
13.5
36
49.5
DDR3-1600
11-11-11
1.25
11
13.75
13.75
35
48.75
DDR3-1866
13-13-13
1.071
13
13.91
13.91
34
47.91
DDR3-2133
14-14-14
0.938
14
13.09
13.09
33
46.09
Unit
ns
nCK
ns
ns
ns
ns
• JEDEC standard 1.5V ± 0.075V Power Supply
• VDDQ = 1.5V ± 0.075V
• 400 MHz fCK for 800Mb/sec/pin, 533MHz fCK for 1066Mb/sec/pin,
667MHz fCK for 1333Mb/sec/pin, 800MHz fCK for 1600Mb/sec/pin,
933MHz fCK for 1866Mb/sec/pin, 1066MHz fCK for 2133Mb/sec/pin
• 8 Banks
• Programmable CAS Latency(posted CAS): 5,6,7,8,9,10,11,13,14
• Programmable Additive Latency: 0, CL-2 or CL-1 clock
• Programmable CAS Write Latency (CWL) = 5 (DDR3-800), 6
(DDR3-1066), 7 (DDR3-1333), 8 (DDR3-1600), 9(DDR3-1866) and
10(DDR3-2133)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting
address “000” only), 4 with tCCD = 4 which does not allow seamless
read or write [either On the fly using A12 or MRS]
• Bi-directional Differential Data-Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin
(RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at
85°C < TCASE < 95 °C
• Support Industrial Temp ( -40 95°C )
- tREFI 7.8us at -40 °C TCASE 85°C
- tREFI 3.9us at 85 °C < TCASE 95°C
• Asynchronous Reset
• Package : 96 balls FBGA - x16
• All of Lead-Free products are compliant for RoHS
• All of products are Halogen-free
The 2Gb DDR3 SDRAM E-die is organized as a 16Mbit x 16 I/Os x 8 banks
device. This synchronous device achieves high speed double-data-rate
transfer rates of up to 2133Mb/sec/pin (DDR3-2133) for general applica-
tions.
The chip is designed to comply with the following key DDR3 SDRAM fea-
tures such as posted CAS, Programmable CWL, Internal (Self) Calibration,
On Die Termination using ODT pin and Asynchronous Reset .
All of the control and address inputs are synchronized with a pair of exter-
nally supplied differential clocks. Inputs are latched at the crosspoint of dif-
ferential clocks (CK rising and CK falling). All I/Os are synchronized with a
pair of bidirectional strobes (DQS and DQS) in a source synchronous fash-
ion. The address bus is used to convey row, column, and bank address
information in a RAS/CAS multiplexing style. The DDR3 device operates
with a single 1.5V ± 0.075V power supply and 1.5V ± 0.075V VDDQ.
The 2Gb DDR3 E-die device is available in 96balls FBGA(x16).
NOTE : 1. This data sheet is an abstract of full DDR3 specification and does not cover the common features which are described in “DDR3 SDRAM Device Operation & Timing
Diagram”.
2. The functionality described and the timing specifications included in this data sheet are for the DLL Enabled mode of operation.
-5-
Free Datasheet http://www.Datasheet4U.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for K4B2G1646E electronic component.


Information Total 65 Pages
Link URL [ Copy URL to Clipboard ]
Download [ K4B2G1646E.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
K4B2G1646BThe function is 2Gb B-die DDR3 SDRAM. SamsungSamsung
K4B2G1646CThe function is 2Gb C-die DDR3 SDRAM. Samsung semiconductorSamsung semiconductor
K4B2G1646EThe function is 2Gb E-die DDR3 SDRAM. SamsungSamsung

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

K4B2     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search