|
|
Datasheet A1252WV-S Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | A1252WV-S | 1.25mm pitch wire to board connector 1.2 A, 20 V, 700 kHz/1.4 MHz, Nonsynchronous Step-Down Regulator ADP2300/ADP2301
FEATURES
1.2 A maximum load current ±2% output accuracy over temperature range Wide input voltage range: 3.0 V to 20 V 700 kHz (ADP2300) or 1.4 MHz (ADP2301) switching frequency options High efficiency up to 91% Curren | ETC | connector |
2 | A1252WV-SF | 1.25mm pitch wire to board connector Supervisory Circuits with Windowed Watchdog and Manual Reset in 5-Lead SOT-23
Data Sheet
FEATURES
Windowed watchdog, 8 timeout options 26 reset threshold options 2.5 V to 5 V in 100 mV increments 4 reset timeout options 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) Manual reset input Open-drain or push | ETC | connector |
3 | A1252WV-SF-2 | 1.25mm pitch wire to board connector 2 A/3 A, 20 V, 700 kHz, Nonsynchronous Step-Down Regulators ADP2302/ADP2303
FEATURES
Wide input voltage range: 3.0 V to 20 V Maximum load current 2 A for ADP2302 3 A for ADP2303 ±1.5% output accuracy over temperature Output voltage down to 0.8 V 700 kHz switching frequency Current-mode control arch | ETC | connector |
A12 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | A12 | 10 TO 1000 MHz CASCADABLE AMPLIFIER A12/SMA12
10 TO 1000 MHz CASCADABLE AMPLIFIER · LOW NOISE: 2.8 dB (TYP.) · HIGH GAIN: 16 dB (TYP.) · MEDIUM OUTPUT POWER: +8 dBm (TYP.) · LOW VSWR: <1.6:1 (TYP.)
Specifications (Rev. Date: 11/00)*
Characteristics Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Fig Tyco Electronics amplifier | | |
2 | A1201 | Continuous-Time Bipolar Switch Family A1201, A1202, A1203, and A1204
Continuous-Time Bipolar Switch Family
Features and Benefits
▪ Continuous-time operation ▫ Fast power-on time ▫ Low noise ▪ Stable operation over full operating temperature range ▪ Reverse battery protection ▪ Solid-state reliability ▪ Factory-programmed Allegro MicroSystems data | | |
3 | A1202 | Continuous-Time Bipolar Switch Family A1201, A1202, A1203, and A1204
Continuous-Time Bipolar Switch Family
Features and Benefits
▪ Continuous-time operation ▫ Fast power-on time ▫ Low noise ▪ Stable operation over full operating temperature range ▪ Reverse battery protection ▪ Solid-state reliability ▪ Factory-programmed Allegro MicroSystems data | | |
4 | A1203 | Continuous-Time Bipolar Switch Family A1201, A1202, A1203, and A1204
Continuous-Time Bipolar Switch Family
Features and Benefits
▪ Continuous-time operation ▫ Fast power-on time ▫ Low noise ▪ Stable operation over full operating temperature range ▪ Reverse battery protection ▪ Solid-state reliability ▪ Factory-programmed Allegro MicroSystems data | | |
5 | A1204 | Continuous-Time Bipolar Switch Family A1201, A1202, A1203, and A1204
Continuous-Time Bipolar Switch Family
Features and Benefits
▪ Continuous-time operation ▫ Fast power-on time ▫ Low noise ▪ Stable operation over full operating temperature range ▪ Reverse battery protection ▪ Solid-state reliability ▪ Factory-programmed Allegro MicroSystems data | | |
6 | A1205 | Continuous-Time Bipolar Switch A1205
Continuous-Time Bipolar Switch
Features and Benefits
▪ Ideal for applications that require pulsing VCC to conserve power ▪ Continuous-time operation ▫ Fast power-on time ▫ Low noise ▪ Stable operation over full operating temperature range ▪ Reverse battery protection ▪ So Allegro MicroSystems data | | |
7 | A1205S-1W | DUAL/SINGLE OUTPUT DC-DC CONVERTER A_S-1W & B_LS-1W Series
1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER
FEATURES ● Efficiency up to 84% ● Small Size ● Low Temperature Rise ● 1KVDC Isolation ● Operating Temperature Range:
-40°C ~ +85°C ● No External Component Required ● Industry Standard MORNSUN converter | |
Esta página es del resultado de búsqueda del A1252WV-S. Si pulsa el resultado de búsqueda de A1252WV-S se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |