DataSheet39.com

V23042-B2351-B101 Datasheet PDF - Siemens

Part Number V23042-B2351-B101
Description High Dielectric Polarized PC Board Relay
Manufacturers Siemens 
Logo Siemens Logo 

Preview ( 2 pages )
		
V23042-B2351-B101 datasheet, circuit
Features
• 5A switching capacity.
• Meets FCC Part 68 isolation.
• Temperature compensated over operating range.
• No magnetic interference between adjacent relays.
• 2 Form C contact arrangement.
• Standard 0.1” x 0.3” grid spacing in a DIP configuration.
• Standard or sensitive DC coils through 48 volts.
• Well suited for audio communications circuits, logic and process control,
vending machines and office automation applications.
• Immersion cleanable, plastic sealed case.
Contact Data
Arrangement: Bifurcated cross bar in 2 Form C (DPDT).
Material: Stationary Contacts: B101: Silver, gold plated.
B201: Palladium-silver, gold plated.
Movable Contacts: Palladium-silver.
Ratings: Max. Switching Voltage: 250VDC, 220VAC.
Max. Switching Power:
DC (resistive load): 50-150W (see Figure 1 – Limiting Curve).
AC (resistive load): 250VA.
Max. Switching Current: 5A, DC or AC.
Min. Switching Current: 0.1mA, 10 mVDC.
Max. Carrying Current: 2A, DC or AC (@85°C).
Expected Mechanical Life: 20 million operations.
Expected Electrical Life: 300,000 ops. @ 5.0A, 12VDC, resistive.
2.5 million ops. @ 1.0A, 24VDC, resistive.
100,000 ops. @ 1.0A, 250VAC, resistive.
Initial Contact Resistance: 50 milliohms, max., @ 10mA, 20mV.
Note: Verify in application for suitability to environmental and expected reliability levels.
Figure 1 - Limiting Curve For DC Power Load
400
300
100 W
200 W
250
200 Curve I
-B201
100
50
40
30
20
10
.1
516 OHM
50 W
199 OHM
100
OHM
50.8
OHM
20.6
OHM
11.8
OHM
1
Curve II
-B101 - B201
Curve I
-B101
4.95 OHM
10
Switching Current (Amps DC)
Curve I: Arc extinguishes before transit period.
Curve II: The burning time of the arc must not exceed 10 ms for 1000 operations.
Initial Dielectric Strength
Between Open Contacts: 1,000V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Between Contact Sets: 1,500V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Contact to Coil: Single Coil: 1,500V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Dual Coil: 1,000V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Between Dual Coils: 400V rms, 60 Hz.
Initial Insulation Resistance
Between Mutually Insulated Terminals: 109 ohms @ 500VDC.
Coil Data @ 20°C
Voltage: 3 through 48VDC.
Maximum Continuous Coil Power: 760 milliwatts.
Temperature Rise: 105°C per watt, typ.
Maximum Coil Temperature: 100°C.
V23042 series
2 Pole, High Dielectric Polarized
PC Board Relay
File E48393
File LR50227
Coil Data @ 20°C
Ultra-Sensitive (“150mW”)
Non-Latching
Single Coil Latching
Nom.
Coil
Voltage
Coil Res. Nom. Coil Coil Res. Nom. Coil
± 10%
Power
± 10%
Power
(ohms)
(mW)
(ohms)
(mW)
3
60 150
120 75
5
165 150
330 75
6
240 150
480 75
9 540 150 1080 75
12
960 150 1,920
75
15
1,500
150
3,000
75
24
3,840
150
7,680
75
Dual Coil Latching
Coil Res. Nom. Coil
± 10%
Power
(ohms)
(mW)
60 150
167 150
240 150
540 150
960 150
1,500
150
3,840
150
Nom.
Coil
Voltage
3
5
6
9
12
15
24
48
Sensitive (“200mW”)
Non-Latching
Single Coil Latching
Coil Res. Nom. Coil Coil Res. Nom. Coil
± 10%
Power
± 10%
Power
(ohms)
(mW)
(ohms)
(mW)
45 200
90 100
125 200
250 100
180 200
405 200
720 200
360
810
1,440
100
100
100
1,125
200
2,200
100
2,880
11,520
200
200
4,000
N/A
144
N/A
Dual Coil Latching
Coil Res. Nom. Coil
± 10%
Power
(ohms)
(mW)
45 200
125 200
180 200
375 200
720 200
1,125
200
2,040
N/A
280
N/A
Nom.
Coil
Voltage
3
5
6
9
12
15
24
48
Intermediate Sensitivity (“260mW”)
Non-Latching
Single Coil Latching
Coil Res. Nom. Coil Coil Res. Nom. Coil
± 10%
Power
± 10%
Power
(ohms)
(mW)
(ohms)
(mW)
36
95
135
300
600
860
2,210
6,330
250
260
260
270
240
260
260
360
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Dual Coil Latching
Coil Res. Nom. Coil
± 10%
Power
(ohms)
(mW)
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Operate Data @ 20°C
Must Operate Voltage:
Intermediate sensitivity: 70% of nominal voltage or less.
Sensitive: 75% of nominal voltage or less.
Ultra-sensitive: 80% of nominal coil voltage or less.
Must Release Voltage (non-latching): 10% of nominal voltage or more.
Operate Time (Excluding Bounce)†: 5 ms, max. ( 3 ms, typical).
Release Time (Excluding Bounce)†: 3 ms, max. ( 2 ms, typical).
Reset Time (Latching)†: 5 ms, max. ( 3 ms, typical).
Bounce Time†: 3 ms, max.
† At or from Nominal Coil Voltage
Environmental Data
Temperature Range: -40°C to +85°C (see Figure 2 – Temp. vs. Voltage).
Vibration: Operational: 50g from 10-500 Hz.; 10g from 500-2,000 Hz.
Shock: Operational: 50g at 11 ms 1/2 sinusoidal impulse.
Mechanical Data
Termination: Printed circuit terminals on 0.1” (2.54mm) centers.
Enclosure: Sealed plastic case.
Weight: 0.18 oz. (5g) approximately.
Free Datasheet http://www.datasheet.in/

No Preview Available !


1 page


Information Total 2 Pages
Download[ V23042-B2351-B101.PDF Datasheet ]

Share Link :

Electronic Components Distributor

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Element14 Chip One Stop



Featured Datasheets

Part NumberDescriptionManufacturers
V23042-B2351-B101The function is High Dielectric Polarized PC Board Relay.Siemens
Siemens

Quick jump to:

V230  1N4  2N2  2SA  2SC  74H  ADC  BC  BF  BU  CXA  HCF  IRF  KA  KIA  LA  LM  MC  NE  ST  STK  TDA  TL  UA 


DataSheet39.com is an Online Datasheet PDF Search Site.
It offers a large amount of data sheet, You can free PDF files download.
The updated every day, always provide the best quality and speed.



keyword : V23042-B2351-B101 schematic, V23042-B2351-B101 equivalent, V23042-B2351-B101 pinout

DataSheet39.com   |  2018   |  Privacy Policy |  Contact Us  | New  |  Search