|
|
Número de pieza | MDT10P73BB | |
Descripción | EPROM-Based 8-bit micro-controller | |
Fabricantes | MDT | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MDT10P73BB (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
No Preview Available ! MDT10P73(BB)
1. General Description
This EPROM-Based 8-bit micro-controller uses a fully
static CMOS technology process to achieve higher
speed and smaller size with the low power
consumption and high noise immunity. On chip
memory includes 4K words of ROM, and 192 bytes of
static RAM.
2. Features
The followings are some of the features on the
hardware and software :
Fully CMOS static design
8-bit data bus
On chip EPROM size: 4.0 K words
Internal RAM size: 192 bytes
37 single word instructions
14-bit instructions
8-level stacks
Operating voltage: 2.5 V ~ 5.5 V (PRD Disable)
4.5 V ~ 5.5 V (PRD Enable)
Operating frequency: DC ~ 20 MHz
The most fast execution time is 200 ns under
20 MHz in all single cycle instructions except
the branch instruction
Addressing modes include direct, indirect and
relative addressing modes
Power-on Reset
Power edge-detector Reset
Power range-detector Reset
Sleep Mode for power saving
Capture, Compare, PWM module
Synchronous serial port with SCM
11 interrupt sources:
-External INT pin
-TMR0 timer, TMR1 timer, TMR2 timer
-A/D conversion completion
-Port B<7:4> interrupt on change
-CCP1, CCP2, SCM, USAR, USAT
A/D converter module:
-5 analog inputs multiplexed into one A/D
converter
-8 bit resolution
TMR0: 8-bit timer/counter
TMR1: 16-bit timer/counter
TMR2: 8-bit timer
4 types of oscillator can be selected by
programming option:
RC-Low cost RC oscillator
LFXT-Low frequency crystal oscillator
XTAL-Standard crystal oscillator
HFXT-High frequency crystal oscillator
On-chip RC oscillator based Watchdog Timer
(WDT)
22 I/O pins with their own independent
direction control
3. Applications
The application areas of this MDT10P73 range
from appliance motor control and high speed
auto-motive to low power remote
transmitters/receivers, pointing devices, and
telecommunications processors, such as Remote
controller, small instruments, chargers, toy,
automobile and PC peripheral … etc.
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 2
2010/10 Ver. 1.8
Free Datasheet http://www.datasheet4u.com/
1 page (4) STATUS (Status register): R03
Bit Symbol
0 C Carry bit
1 HC Half Carry bit
2 Z Zero bit
3 /PF Power down bit
4 /TF WDT timer overflow bit
5 RBS0 Register Bank select bit
0: 00h~7Fh (Bank0)
1: 80h~FFh (Bank1)
7~6 -- General purpose bit
(5) MSR (Memory Bank Select Register): R04
Memory Bank Select Register:
0: 00h~7Fh (Bank0)
1: 80h~FFh (Bank1)
b7 b6 b5 b4
MDT10P73(BB)
Function
b3 b2 b1 b0
(6) PORT A: R05
PA5~PA0, I/O Register
(7) PORT B: R06
PB7~PB0, I/O Register
(8) PORT C: R07
PC7~PC0, I/O Register
(9) PCHLAT: R0A
Indirect Addressing Mode
(10) INTS (Interrupt Status Register): R0B
Bit Symbol
Function
0 RBIF PORT B change interrupt flag, Set when PB <7:4> inputs change
1 INTF Set when INT interrupt occurs
2 TIF Set when TMR0 overflows
3 RBIE 0: Disable PB change interrupt
1: Enable PB change interrupt
4 INTS 0: Disable INT interrupt
1: Enable INT interrupt
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 5
2010/10 Ver. 1.8
Free Datasheet http://www.datasheet4u.com/
5 Page MDT10P73(BB)
(30) ADS0 ( A/D Status Register ): R1F
Bit Symbol
Function
0 ADRUN 0: A/D converter module is shut off and consumes no operating current
1: A/D converter module is operating
1 -- Unimplemented
2 GO/DONEB 0: A/D conversion not in progress
1: A/D conversion in progress
5~3 CHS2~0 000: AIC0 001: AIC1 010: AIC2 011: AIC3 100: AIC4
7~6 ASCS1-0 00: fosc/2 01: fosc/8 10: fosc/32 11: f RC (*Note)
*Note: determined by OSC mode, HF: fosc/32, XT: fosc/8, RC: fosc/2, LF: fosc/2
(31) TMR (Time Mode Register): R81
Bit Symbol
Function
Prescaler Value
RTCC rate
000
1:2
001
1:4
010
1:8
2~0 PS2~0
011
100
1 : 16
1 : 32
101
1 : 64
110
1 : 128
111
1 : 256
Prescaler assignment bit
3 PSC 0: RTCC
1: Watchdog Timer
RTCC signal edge
4 TCE 0: Increment on low-to-high transition on RTCC pin
1: Increment on high-to-low transition on RTCC pin
RTCC signal set
5 TCS 0: Internal instruction cycle clock
1: Transition on RTCC pin
Interrupt edge select
6 IES 0: Interrupt on falling edge on PB0
1: Interrupt on rising edge on PB0
PORTB7~0 pull-hi
7 PBPH 0: PORTB7~0 pull-hi are enable
1: PORTB7~0 pull-hi are disable
(32) CPIO A (Control Port I/O Mode Register): R85
=“0”, I/O pin in output mode;
=“1”, I/O pin in input mode.
WDT rate
1:1
1:2
1:4
1:8
1 : 16
1 : 32
1 : 64
1 : 128
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 11
2010/10 Ver. 1.8
Free Datasheet http://www.datasheet4u.com/
11 Page |
Páginas | Total 22 Páginas | |
PDF Descargar | [ Datasheet MDT10P73BB.PDF ] |
Número de pieza | Descripción | Fabricantes |
MDT10P73BB | EPROM-Based 8-bit micro-controller | MDT |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |