|
|
PDF BUL146FG Data sheet ( Hoja de datos )
| Número de pieza | BUL146FG | |
| Descripción | SWITCHMODE NPN Bipolar Power Transistor | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BUL146FG (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
BUL146G, BUL146FG
SWITCHMODEt NPN
Bipolar Power Transistor
For Switching Power Supply Applications
The BUL146G / BUL146FG have an applications specific
state−of−the−art die designed for use in fluorescent electric lamp
ballasts to 130 W and in Switchmode Power supplies for all types of
electronic equipment.
Features
• Improved Efficiency Due to Low Base Drive Requirements:
♦ High and Flat DC Current Gain
♦ Fast Switching
♦ No Coil Required in Base Circuit for Turn−Off (No Current Tail)
• Full Characterization at 125°C
• Two Packages Choices: Standard TO−220 or Isolated TO−220
• Parametric Distributions are Tight and Consistent Lot−to−Lot
• BUL146F, Case 221D, is UL Recognized to 3500 VRMS: File # E69369
• These Devices are Pb−Free and are RoHS Compliant*
MAXIMUM RATINGS
Rating
Collector−Emitter Sustaining Voltage
Collector−Base Breakdown Voltage
Emitter−Base Voltage
Collector Current − Continuous
− Peak (Note 1)
Base Current
− Continuous
− Peak (Note 1)
RMS Isolation Voltage (Note 2)
(for 1 sec, R.H. < 30%, TC = 25_C)
Total Device Dissipation @ TC = 25_C
BUL146
BUL146F
Derate above 25°C
BUL146
BUL146F
Symbol
VCEO
VCES
VEBO
IC
ICM
IB
IBM
VVIISSOOLL12
VISOL3
PD
Value
400
700
9.0
6.0
15
4.0
8.0
BUL146F
4500
3500
1500
100
40
0.8
0.32
Unit
Vdc
Vdc
Vdc
Adc
Adc
V
W
W/_C
Operating and Storage Temperature
THERMAL CHARACTERISTICS
TJ, Tstg −65 to 150 _C
Characteristics
Thermal Resistance, Junction−to−Case
BUL146
BUL146F
Symbol
RqJC
Max
1.25
3.125
Unit
_C/W
Thermal Resistance, Junction−to−Ambient RqJA
62.5 _C/W
Maximum Lead Temperature for Soldering
Purposes 1/8″ from Case for 5 Seconds
TL
260 _C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Pulse Test: Pulse Width = 5 ms, Duty Cycle ≤ 10%.
2. Proper strike and creepage distance must be provided.
http://onsemi.com
POWER TRANSISTOR
8.0 AMPERES
1000 VOLTS
45 and 125 WATTS
MARKING
DIAGRAMS
123
TO−220AB
CASE 221A−09
STYLE 1
BUL146G
AYWW
1 23
TO−220 FULLPACK
CASE 221D
STYLE 2
UL RECOGNIZED
BUL146FG
AYWW
G = Pb−Free Package
A = Assembly Location
Y = Year
WW = Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
*For additional information on our Pb−Free strategy
and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2010
April, 2010 − Rev. 9
1
Publication Order Number:
BUL146/D
Free Datasheet http://www.datasheet4u.com/
1 page  
1000
800
600
400
200
0
0
BUL146G, BUL146FG
TYPICAL SWITCHING CHARACTERISTICS
(IB2 = IC/2 for all switching)
IC/IB = 5
IC/IB = 10
IB(off) = IC/2
VCC = 300 V
PW = 20 ms
TJ = 125°C
TJ = 25°C
24 6
IC, COLLECTOR CURRENT (AMPS)
Figure 7. Resistive Switching, ton
8
4000
3500
3000 IC/IB = 5
TJ = 25°C
TJ = 125°C
IB(off) = IC/2
VCC = 300 V
PW = 20 ms
2500
IC/IB = 10
2000
1500
1000
500
0
0 24 68
IC, COLLECTOR CURRENT (AMPS)
Figure 8. Resistive Switching, toff
2500
2000
1500
1000
500
0
0
IC/IB = 5
IB(off) = IC/2
VCC = 15 V
VZ = 300 V
LC = 200 mH
TJ = 25°C
TJ = 125°C
IC/IB = 10
1 23 4 5 6 7
IC COLLECTOR CURRENT (AMPS)
Figure 9. Inductive Storage Time, tsi
8
4000
TJ = 25°C
IB(off) = IC/2
3500
TJ = 125°C
VCC = 15 V
3000
IC = 3 A
VZ = 300 V
LC = 200 mH
2500
2000
1500
1000
500 IC = 1.3 A
0
3 4 5 67
hFE, FORCED GAIN
Figure 10. Inductive Storage Time, tsi(hFE)
250
tc
200
150 tfi
100
IB(off) = IC/2
50 VCC = 15 V
VZ = 300 V
TJ = 25°C
0 LC = 200 mH
TJ = 125°C
01 2 3 4 56 78
IC, COLLECTOR CURRENT (AMPS)
Figure 11. Inductive Switching, tc and tfi
IC/IB = 5
250
200
150 tfi
IB(off) = IC/2
VCC = 15 V
VZ = 300 V
tc LC = 200 mH
100
TJ = 25°C
TJ = 125°C
50
0 12 3 4 56 7
IC, COLLECTOR CURRENT (AMPS)
Figure 12. Inductive Switching, tc and tfi
IC/IB = 10
8
http://onsemi.com
5
Free Datasheet http://www.datasheet4u.com/
5 Page 
BUL146G, BUL146FG
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
11
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
BUL146/D
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet BUL146FG.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BUL146FG | SWITCHMODE NPN Bipolar Power Transistor | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |