DataSheet39.com

What is AD9106?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "Digital-to-Analog Converter and Waveform Generator".


AD9106 Datasheet PDF - Analog Devices

Part Number AD9106
Description Digital-to-Analog Converter and Waveform Generator
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and AD9106 download ( pdf file ) link at the bottom of this page.





Total 48 Pages



Preview 1 page

No Preview Available ! AD9106 datasheet, circuit

Data Sheet
Quad, Low Power, 12-Bit, 180 MSPS, Digital-to-
Analog Converter and Waveform Generator
AD9106
FEATURES
Highly integrated quad DAC
On-chip 4096 × 12-bit pattern memory
On-chip DDS
Power dissipation at 3.3 V, 4 mA output
315 mW at 180 MSPS
Sleep mode: < 5 mW at 3.3 V
Supply voltage: 1.8 V to 3.3 V
SFDR to Nyquist
86 dBc at 1 MHz output
85 dBc at 10 MHz output
Phase noise at 1 kHz offset, 180 MSPS, 8 mA: −140 dBc/Hz
Differential current outputs: 8 mA maximum at 3.3 V
Small footprint 32-lead, 5 mm × 5 mm with 3.5 mm ×
3.6 mm exposed paddle LFCSP
Pb-free package
APPLICATIONS
Medical instrumentation
Ultrasound transducer excitation
Portable instrumentation
Signal generators, arbitrary waveform generators
GENERAL DESCRIPTION
The AD9106 TxDAC® and waveform generator is a high perform-
ance quad DAC integrating on-chip pattern memory for complex
waveform generation with a direct digital synthesizer (DDS). The
DDS is a 12-bit output, up to 180 MHz master clock sinewave
generator with a 24-bit tuning word allowing 10.8 Hz/LSB
frequency resolution. The DDS has a single frequency output
for all four DACs and independent programmable phase shift
outputs for each of the four DACs.
SRAM data can include directly generated stored waveforms,
amplitude modulation patterns applied to DDS outputs, or
DDS frequency tuning words.
An internal pattern control state machine allows the user to
program the pattern period for all four DACs as well as the start
delay within the pattern period for the signal output on each
DAC channel.
An SPI interface is used to configure the digital waveform
generator and load patterns into the SRAM.
There are gain adjustment factors and offset adjustments
applied to the digital signals on their way into the four DACs.
The AD9106 offers exceptional ac and dc performance and
supports DAC sampling rates up to 180 MSPS. The flexible
power supply operating range of 1.8 V to 3.3 V and low power
dissipation of the AD9106 make it well suited for portable and low
power applications.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Free Datasheet http://www.datasheet4u.com/

line_dark_gray
AD9106 equivalent
Data Sheet
AD9106
DC SPECIFICATIONS (1.8 V)
TMIN to TMAX, AVDD = 1.8 V, DVDD = DLDO1 = DLDO2 = 1.8 V, CLKVDD = CLDO = 1.8 V, IOUTFS = 4 mA, maximum sample rate, unless
otherwise noted.
Table 2.
Parameter
RESOLUTION
ACCURACY at 1.8 V
Differential Nonlinearity (DNL)
Integral Nonlinearity (INL)
DAC OUTPUTS
Offset Error
Gain Error Internal Reference—No Automatic IOUTFS Calibration
Full-Scale Output Current1 at 1.8 V
Output Resistance
Output Compliance Voltage
Crosstalk, DAC to DAC (fOUT = 30 MHz)
Crosstalk, DAC to DAC (fOUT = 60 MHz)
DAC TEMPERATURE DRIFT
Gain
Reference Voltage
REFERENCE OUTPUT
Internal Reference Voltage with AVDD = 1.8 V
Output Resistance
REFERENCE INPUT
Voltage Compliance
Input Resistance External, Reference Mode
DAC MATCHING
Gain Matching—No Automatic IOUTFS Calibration
1 Based on use of 8 kΩ external xRSET resistors.
Min Typ Max Unit
12 Bits
±0.4 LSB
±0.4 LSB
±.00025
% of FSR
−1.0 +1.0 % of FSR
2 4 4 mA
200 MΩ
−0.5 +1.0 V
94 dB
78 dB
±228
±131
ppm/°C
ppm/°C
0.8 1.0 1.2 V
10 kΩ
0.1
1
1.25 V
±0.75
% of FSR
Rev. A | Page 5 of 48
Free Datasheet http://www.datasheet4u.com/


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD9106 electronic component.


Information Total 48 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AD9106.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AD9100The function is Ultrahigh Speed Monolithic Track-and-Hold. Analog DevicesAnalog Devices
AD9101The function is 125 MSPS Monolithic Sampling Amplifier. Analog DevicesAnalog Devices
AD9102The function is Digital to Analog Converter and Waveform Generator. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AD91     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search