|
|
PDF AUIRFP064N Data sheet ( Hoja de datos )
| Número de pieza | AUIRFP064N | |
| Descripción | Power MOSFET ( Transistor ) | |
| Fabricantes | International Rectifier | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AUIRFP064N (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
AUTOMOTIVE GRADE
PD - 96375
AUIRFP064N
Features
l Advanced Planar Technology
l Low On-Resistance
l Dynamic dV/dT Rating
l 175°C Operating Temperature
l Fast Switching
l Fully Avalanche Rated
l Repetitive Avalanche Allowed up to Tjmax
l Lead-Free, RoHS Compliant
l Automotive Qualified *
Description
Specifically designed for Automotive applications, this
Cellular design of HEXFET® Power MOSFETs utilizes
the latest processing techniques to achieve low on-
resistance per silicon area. This benefit combined with
the fast switching speed and ruggedized device design
that HEXFET power MOSFETs are well known for,
provides the designer with an extremely efficient and
reliable device for use in Automotive and a wide variety
of other applications.
G
G
G a te
HEXFET® Power MOSFET
D
V(BR)DSS
55V
RDS(on) max. 0.008Ω
S ID
110Ag
D
S
GD
TO-247AC
D
D ra in
S
S o u rce
Absolute Maximum Ratings
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These
are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated
in the specifications is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect
device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air
conditions. Ambient temperature (TA) is 25°C, unless otherwise specified.
ID @ TC = 25°C
ID @ TC = 100°C
IDM
PD @TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
TSTG
Parameter
Continuous Drain Current, VGS @ 10V
Continuous Drain Current, VGS @ 10V
Pulsed Drain Current
Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
dSingle Pulse Avalanche Energy
ÃAvalanche Current
Repetitive Avalanche Energy
ePeak Diode Recovery dv/dt
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds
Mounting Torque, 6-32 or M3 screw
Thermal Resistance
RθJC
RθCS
RθJA
Parameter
Junction-to-Case
Case-to-Sink, Flat, Greased Surface
Junction-to-Ambient
Max.
g110
80 g
390
200
1.3
± 20
480
59
20
5.0
-55 to + 175
300 (1.6mm from case )
y y10 lbf in (1.1N m)
Typ.
–––
0.24
–––
Max.
0.75
–––
40
Units
A
W
W/°C
V
mJ
A
mJ
V/ns
°C
Units
°C/W
HEXFET® is a registered trademark of International Rectifier.
*Qualification standards can be found at http://www.irf.com/
www.irf.com
1
Free Datasheet http:/0/w6w/2w2/.d1a1tasheet4u.com/
1 page  
AUIRFP064N
www.irf.com
5
Free Datasheet http://www.datasheet4u.com/
5 Page 
AUIRFP064N
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR)
reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its prod-
ucts and services at any time and to discontinue any product or services without notice. Part numbers designated
with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product
discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale
supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance
with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary
to support this warranty. Except where mandated by government requirements, testing of all parameters of each
product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their
products and applications using IR components. To minimize the risks with customer products and applications,
customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this informa-
tion with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that
product or service voids all express and any implied warranties for the associated IR product or service and is an
unfair and deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant
into the body, or in other applications intended to support or sustain life, or in any other application in which the failure
of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR
products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages,
and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the
design or manufacture of the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense,
are designed and manufactured to meet DLA military specifications required by certain military, aerospace or other
applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in
applications requiring military grade products, is solely at the Buyer’s own risk and that they are solely responsible for
compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific
IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the
designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive
applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
www.irf.com
11
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet AUIRFP064N.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AUIRFP064N | Power MOSFET ( Transistor ) | International Rectifier |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |