|
|
PDF CN50A24 Data sheet ( Hoja de datos )
| Número de pieza | CN50A24 | |
| Descripción | DC to DC Converter | |
| Fabricantes | TDK | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CN50A24 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
CN50A24
SPECIFICATIONS
TDK-Lambda
C259-01-01/50
ITEMS
MODEL
CN50A24-5
CN50A24-12
CN50A24-24
1 Nominal Output Voltage
V5
12 24
2 Maximum Output Current
A 10
4.2 2.1
3 Maximum Output Power
W 50
50.4 50.4
4 Efficiency (Typ.)
(*1) %
85
86 86
5 Input Voltage Range
VDC
14.4-36 (40V transient for 3sec)
6 Input Current
(*1) A
2.48
2.47
2.47
7 Output Voltage Accuracy
(*1) %
-/+ 1
8 Output Voltage Range
(*8) %
-10 / +20
- / +10
9 Maximum Ripple & Noise
(*8) mV
100
150 240
10 Maximum Line Regulation
(*2) mV
20
48 96
11 Maximum Load Regulation
(*3) mV
40
96 192
12 Over Current Protection
(*4) %
105 - 140
13 Over Voltage Protection (*5)(*7) %
125 - 145 (Inverter shutdown method)
14 Remote Sensing
(*7) -
Possible
15 Remote ON/OFF Control
(*7) -
Possible (SHORT : ON OPEN : OFF)
16 Parallel Operation
-
-
17 Series Operation
(*7) -
Possible
18 Operating Temperature
(*6) -
-40°C - +100°C (Baseplate) Ambient Temperature Minimum=-40°C
19 Operating Humidity
-
5 - 95%RH (No Dewdrop)
20 Storage Temperature
-
-40°C - +100°C
21 Storage Humidity
-
5 - 95%RH (No Dewdrop)
22 Cooling - Conduction Cooling
23 Temperature Coefficient
-
0.02%/°C
24 Withstand Voltage
(*9) - Input-Baseplate : 2.0kVAC for 1min. (20mA), Input-Output: 3.0kVAC for 1min. (20mA).
Output-Baseplate : 500VAC for 1min. (20mA).
25 Isolation Resistance
- More than 100MWhttp://www.DataSheet4U.com/ at 25°C and 70%RH Output-Baseplate…500VDC
26 Vibration
- At No Operating, 10-55Hz (Sweep for 1min.)
Amplitude 0.825mm Constant (Maximum 49.0m/s2) X,Y,Z 1 hour each
27 Shock
IEC61373 - Category 1 - Grade B
- 196.1m/s2
IEC61373 - Category 1 - Grade B
28 Safety
- Approved by UL60950-1, CSA60950-1, EN60950-1
29 Weight (Typ.)
g
70
30 Size (W x H x D)
mm 36.8 x 12.7 x 57.9 (Refer to Outline Drawing)
*Read instruction manual carefully, before using the power supply unit.
Derating Curve
=NOTES=
*1. At 24VDC and Maximum output current.
(Baseplate Temperature = +25°C)
100
*2. 14.4 - 36VDC, Constant load.
*3. No Load - Full Load, Constant input voltage.
80
*4. 5V delay shutdown when left in OCP condition,
with the output voltage less than the LVP(Low Voltage Protection.) level.
60
12V and 24V constant current limiting with automatic recovery.
LVP reset : Line off or Control off.
40
*5. OVP reset : Line off or Control off.
20
*6. Rating - Refer to Derating Curve on the right.
- Load(%) is percent of Maximum output current.
0
- Refer to Instruction Manual.
-40 -20 0 20 40 60 80 100
*7. Refer to Instruction Manual.
*8. External components are necessary for operation.
Baseplate Temperature (°C)
(Refer to Basic Connection and Instruction Manual.)
*9. This specification applies to power supply module as stand-alone.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet CN50A24.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CN50A24 | DC to DC Converter | TDK |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |