DataSheet39.com

What is DJ-175?

This electronic component, produced by the manufacturer "ALINCO", performs the same function as "Service Manual".


DJ-175 Datasheet PDF - ALINCO

Part Number DJ-175
Description Service Manual
Manufacturers ALINCO 
Logo ALINCO Logo 


There is a preview and DJ-175 download ( pdf file ) link at the bottom of this page.





Total 28 Pages



Preview 1 page

No Preview Available ! DJ-175 datasheet, circuit

Service Manual
DJ-175
Specifications
Circuit Description
Parts List
Exploded View
PC Board View
Adjustment
Schematic Diagram
Block Diagram
http://www.DataSheet4U.net/
ALINCO, INC.
datasheet pdf - http://www.DataSheet4U.net/

line_dark_gray
DJ-175 equivalent
3) PLL Synthesizer System
1. PLL
The dividing ratio is obtained by sending data from the CPU (IC113) to pin 10
and sending clock pulse to pin 9 of the PLL IC ( IC101 ). The oscillated signal
from the VCO is amplified by the buffer (Q116) and input to pin 8 of IC102.
Each programmable divider in IC102 divides the frequency of the input signal
by N according to the frequency data, to generate a comparison frequency of
5 or 6.25kHz.
2. Reference Frequency Circuit
The reference frequency appropriate for the channel steps is obtained by
dividing the 21.25MHz reference oscillation (X102) by 4250 or 3400,
according to the data from the CPU (IC113). When the resulting frequency is
5kHz, channel steps of 5, 10, 15, 20, and 30kHz are used. When it is 6.25kHz,
channel steps of 12.5, 25 , and 50kHz are used.
3. Phase Comparator Circuit
The PLL (IC102) uses the reference frequency, 5 or 6.25kHz. The phase
comparator in the IC102 compares the phase of the frequency from the VCO
with that of the comparison frequency, 5 or 6.25kHz, which is obtained by the
internal divider in IC102.
http://www.DataSheet4U.net/
4. PLL Loop Filter Circuit
If a phase difference is found in the phase comparison between the reference
frequency and VCO output frequency, the charge pump output (pin 5) of IC102
generates a pulse signal, which is converted to DC voltage by the PLL loop
filter and input to the varicap of the VCO unit for oscillation frequency control.
5. VCO Circuit
A Colpitts oscillation circuit driven by Q108 directly oscillates the desires
frequency. The frequency control voltage determined in the CPU (IC113) and
PLL circuit is input to the varicaps (D105 and D107). This change the
oscillation frequency, which is amplified by the VCO buffer (Q113) and output
from the VCO unit.
datasheet pdf - http://www.DataSheet4U.net/


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for DJ-175 electronic component.


Information Total 28 Pages
Link URL [ Copy URL to Clipboard ]
Download [ DJ-175.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
DJ-175The function is Service Manual. ALINCOALINCO

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

DJ-1     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search