W25Q32V Datasheet PDF - Winbond

Part Number W25Q32V
Manufacturers Winbond 
Logo Winbond Logo 

Preview ( 30 pages )
W25Q32V datasheet, circuit
Publication Release Date: August 19, 2009
Preliminary - Revision E
Datasheet pdf -

No Preview Available !

1 page
W25Q32V equivalent
The W25Q32V (32M-bit) Serial Flash memory provides a storage solution for systems with limited space,
pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash
devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP)
and storing voice, text and data. The devices operate on a single 2.7V to 3.6V power supply with current
consumption as low as 4mA active and 1µA for power-down. All devices are offered in space-saving
The W25Q32V array is organized into 16,384 programmable pages of 256-bytes each. Up to 256 bytes
can be programmed at a time. Pages can be erased in groups of 16 (sector erase), groups of 128 (32KB
block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q32V has 1,024
erasable sectors and 64 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in
applications that require data and parameter storage. (See figure 2.)
The W25Q32V supports the standard Serial Peripheral Interface (SPI), and a Dual/Quad output as well
as Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3
(/HOLD). SPI clock frequencies of up to 80MHz are supported allowing equivalent clock rates of 160MHz
for Dual Output and 320MHz for Quad Output when using the Fast Read Dual/Quad Output instructions.
These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The
Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-
overhead to read a 24-bit address, allowing true XIP (execute in place) operation.
A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control,
provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and
device identification with a 64-bit Unique Serial Number.
Family of SpiFlash Memories
– W25Q32: 32M-bit / 4M-byte (4,194,304)
– 256-bytes per programmable page
Standard, Dual or Quad SPI
– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
Highest Performance Serial Flash
– Up to 6X that of ordinary Serial Flash
– 80MHz clock operation
– 160MHz equivalent Dual SPI
– 320MHz equivalent Quad SPI
– 40MB/S continuous data transfer rate
Efficient “Continuous Read Mode”
– Low Instruction overhead
– As few as 8 clocks to address memory
– Allows true XIP (execute in place) operation
– Outperforms X16 Parallel Flash
Low Power, Wide Temperature Range
– Single 2.7 to 3.6V supply
– 4mA active current, <1µA Power-down (typ.)
– -40°C to +85°C operating range
Flexible Architecture with 4KB sectors
– Uniform Sector Erase (4K-bytes)
– Block Erase (32K and 64K-bytes)
– Program one to 256 bytes
– More than 100,000 erase/write cycles
– More than 20-year data retention
Advanced Security Features
– Software and Hardware Write-Protect
– Top or Bottom, Sector or Block selection
– Lock-Down and OTP protection(1)
– 64-Bit Unique ID for each device(1)
Space Efficient Packaging
– 8-pin SOIC 208-mil
– 8-pad WSON 6x5-mm / (2)8x6-mm
– 16-pin SOIC 300-mil
– Contact Winbond for KGD and CSP options
(1)Contact Winbond for details
(2)Special Order, contact Winbond for more ordering information.
Publication Release Date: August 19, 2009
- 5 - Preliminary - Revision E
Datasheet pdf -

5 Page

Information Total 30 Pages
Download[ W25Q32V.PDF Datasheet ]

Share Link :

Electronic Components Distributor

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Element14 Chip One Stop

Featured Datasheets

Part NumberDescriptionManufacturers
W25Q32The function is (W25Qxx) FLASH MEMORY.Winbond
W25Q32BVThe function is 3V 32M-BIT SERIAL FLASH MEMORY.Winbond
W25Q32DWThe function is 1.8V 32M-BIT SERIAL FLASH MEMORY.Winbond

Quick jump to:

W25Q  1N4  2N2  2SA  2SC  74H  ADC  BC  BF  BU  CXA  HCF  IRF  KA  KIA  LA  LM  MC  NE  ST  STK  TDA  TL  UA is an Online Datasheet PDF Search Site.
It offers a large amount of data sheet, You can free PDF files download.
The updated every day, always provide the best quality and speed.

keyword : W25Q32V schematic, equivalent, pinout, replacement, circuit, manual   |  2020   |  Privacy Policy |  Contact Us  | New  |  Search