|
|
PDF LTA216AT01 Data sheet ( Hoja de datos )
| Número de pieza | LTA216AT01 | |
| Descripción | LCD Module | |
| Fabricantes | Samsung | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LTA216AT01 (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
|
No Preview Available !
Product Information
Customer :
DATE : 09. Jan. 2009
SSAAMMSSUUNNGGTTFFTT--LLCCDD
MMOODDEELL :: LLTTAA221166AATT0011
APPROVAED BY
DATE
09. Jan. 2009
PREPARED BY
DATE
09. Jan. 2009
LCD Business
Samsung Electronics Co . , LTD.
www.DataSheet4U.net
MODEL
LTA216AT01
Doc. No
06-000-G-090109
Page 1 / 26
www.DataSheet4U.net
1 page  
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
Item Symbol Min. Max. Unit Note
Power Supply Voltage
Storage temperature
Center of Glass Surface
temperature (Operation)
VDD GND-0.5 5.5 V (1)
TSTG
-20 60 ℃ (2)
TSUR 0 50 ℃ (2)
Operation temperature
TOPR 0 50 ℃
Shock ( non - operating ) Snop - 50 G
Vibration ( non - operating )
Vnop
- 1.5 G
± °Note (1) Ta= 25 2 C
(2) Temperature and relative humidity range are shown in the figure below.
≤ °a. 90 % RH Max. (Ta 39 C)
°b. Relative Humidity is 90% or less. (Ta > 39 C)
c. No condensation
± ± ±(3) 11ms, sine wave, one time for X, Y, Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
(2)
(3)
(4)
Fig. Temperature and Relative humidity range
www.DataSheet4U.net
MODEL
LTA216AT01
Doc. No
06-000-G-090109
Page 5 / 26
www.DataSheet4U.net
5 Page 
(2) Lamp frequency which may produce interference with horizontal synchronous frequency
may cause line flow on the display. Therefore lamp frequency should be detached from the
horizontal synchronous frequency and its harmonics as far as possible in order to avoid
interference.
(3) Life time (Hr) is defined as the time when brightness of a lamp unit itself becomes 50% or
± °less than its original value at the condition of Ta = 25 2 C and IL = TBD mArms
(4) Designing a system inverter intended to have better display performance, power
efficiency and lamp reliability.
They would help increase the lamp lifetime and reduce leakage current.
a. The measurement should be done at typical lamp current.
b. The asymmetry rate of the inverter waveform should be less than 10%.
c. The distortion rate of the waveform should be √2 with ±10% tolerance.
- Inverter output waveform had better be more similar to ideal sine wave.
Ip
I-p
Fig. Wave form of the inverter
Asymmetry rate
| Ip − I - p| × 100
Irms
Distortion rate
| Ip | or | I - p |
Irms Irms
(5) If an inverter has shutdown function, it should keep its output for over 1 second
even if the lamp connector is open. Otherwise the lamps may not be turned on.
www.DataSheet4U.net
MODEL
LTA216AT01
Doc. No
06-000-G-090109
Page 11 / 26
www.DataSheet4U.net
11 Page | ||
| Páginas | Total 26 Páginas | |
| PDF Descargar | [ Datasheet LTA216AT01.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LTA216AT01 | LCD Module | Samsung |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |