ID100 Datasheet PDF - Micross
| Part Number | ID100 | |
| Description | Dual PicoAmp Diodes | |
| Manufacturers | Micross | |
| Logo |  |
|
|
There is a preview and ID100 download ( pdf file ) link at the bottom of this page. Total 1 Pages | ||
Preview 1 page No Preview Available !
ID100
LOW LEAKAGE
PICO-AMP DUAL DIODE
Linear Systems replaces discontinued Intersil ID100
The ID100 is a low leakage Monolithic Dual Pico-Amp Diode
The ID100 low-leakage monolithic dual diode provides a
superior alternative to conventional diode technology
when reverse current (leakage) must be minimized. In
addition the monolithic dual construction allows
excellent capacitance matching per diode. The ID100
features a leakage current of 0.1 pA and is well suited
for use in applications such as input protection for
operational amplifiers.
FEATURES
DIRECT REPLACEMENT FOR INTERSIL ID100
REVERSE LEAKAGE CURRENT
REVERSE BREAKDOWN VOLTAGE
REVERSE CAPACITANCE
ABSOLUTE MAXIMUM RATINGS (Note 1)
@ 25°C (unless otherwise noted)
IR = 0.1pA
BVR ≥ 30V
Crss = 0.75pF
Maximum Temperatures
ID100 Benefits:
Storage Temperature
‐65°C to +200°C
Negligible Circuit Leakage Contribution
Circuit “Transparent” Except to Shunt
High-Frequency Spikes
Simplicity of Operation
Operating Junction Temperature
Maximum Power Dissipation
Continuous Power Dissipation
Maximum Currents
Forward Current
‐55°C to +150°C
300mW
20mA
ID100 Applications:
Reverse Current
Maximum Voltages
100µA
Op Amp Input Protection
Multiplexer Overvoltage Protection
Reverse Voltage
Diode to Diode Voltage
30V
±50V
ID100 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted)
SYMBOL
CHARACTERISTICS
MIN. TYP. MAX.
UNITS
CONDITIONS
BVR
Reverse Breakdown Voltage 30 ‐‐
‐‐
V
IR = 1µA
VF
Forward Voltage
0.8 ‐‐
1.1
V
IF = 10mA
IR
|IR1‐IR2|
ClickCrSS
Reverse Leakage Current
Differential Leakage Current
Total Reverse Capacitance(Note 2)
‐‐
‐‐
‐‐
‐‐
To Buy0.1
2.0
‐‐
0.75
‐‐
10
3
1
pA
pF
VR = 1V
VR = 10V
VR = 10V, f = 1MHz
Note 1 - Absolute maximum ratings are limiting values above which ID100 serviceability may be impaired.
Note 2 - Design reference only, not 100% tested
FIGURE 1 – Operational Amplifier Protection
Input Differential Voltage limited to 0.8V (typ) by Diodes ID100
D1 and D2. Common Mode Input voltage limited by Diodes ID100
D3 and D4 to ±15V.
FIGURE 2 – Sample & Hold Circuit
Typical Sample and Hold circuit with clipping. ID100 diodes
reduce offset voltages fed capacitively from the ID100 switch
gate.
TO-78 (Bottom View)
Micross Components Europe
Tel: +44 1603 788967
Email: [email protected]
Web: http://www.micross.com/distribution
Available Packages:
ID100 in TO-78
ID100 available as bare die
Please contact Micross for
full package and die dimensions
Note pins 3 & 5 must not be connected, in
any fashion or manner, to any circuit or node
Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or
other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.
Micross Components Ltd, United Kingdom, Tel: +44 1603 788967, Fax: +44 1603788920, Email: [email protected] Web: www.micross.com/distribution.aspx
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ID100 electronic component. |
| Information | Total 1 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ ID100.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| ID100 | The function is SILICON CONTROLLED RECTIFIERS. Digitron Semiconductors |  |
| ID100 | The function is MONOLITHIC DUAL PICO AMPERE DIODES. Linear Integrated Systems |  |
| ID100 | The function is SCR. Microsemi |  |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
ID10
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||