K10P-11D15-24 Datasheet PDF - Tyco Electronics
Part Number | K10P-11D15-24 | |
Description | 15 Amp General Purpose Miniature Relay | |
Manufacturers | Tyco Electronics | |
Logo | ||
There is a preview and K10P-11D15-24 download ( pdf file ) link at the bottom of this page. Total 3 Pages |
Preview 1 page No Preview Available ! Catalog 1308242
Issued 3-03
P&B
K10 series
15 Amp General Purpose
Miniature Relay
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent approvals
files of the agencies/laboratories and review them to ensure the product meets
the requirements for a given application.
Features
• K10 - DPDT contact arrangement standard.
• AC and DC coils.
• Mounting options include socket, PCB, top flange.
• UL Class B coil insulation system.
Contact Data @ 25°C
Materials: Silver-cadmium oxide.
Expected Life: 10 million operations, mechanical; 100,000
operations minimum at rated loads.
Contact Ratings
Contact Code
5
Material
Silver-cadmium
oxide
UL/CSA Ratings
15A @ 30VDC
15A @ 120VAC
10A @ 277VAC
1/3HP @ 120VAC
1/2HP @ 250VAC
Type
Resistive
Resistive
Resistive
Coil Data
Nominal
Voltage
DC Coils
Resistance
in Ohms
± 10%
Nominal
Current in
Milliamps
AC Coils
Resistance
in Ohms
± 15%
Nominal
Current in
Milliamps
6
12
24
48
110
120*
240*
40
160
650
2,600
11,000
___
___
150
75
37
18.5
10
___
___
10.5
43
160
668
___
3,900
12,000
200
100
52
26
___
11
6
*For 220/240VDC operation, use 11,000 Ohm, 5 Watt dropping resistor
in series with the 110VDC coil.
Operate Data @ 25°C
Must Operate Voltage:
DC Coils: 75% of nominal voltage.
AC Coils: 85% of nominal voltage.
Operate Time (Excluding Bounce): 13 milliseconds, typical, at nominal
voltage.
Release Time (Excluding Bounce): 6 milliseconds, typical, at nominal
voltage.
Initial Dielectric Strength
Between Open Contacts: 1,000V rms.
Between Adjacent Contacts: 1,500V rms.
Between Contacts and Coil: 1,500V rms.
Environmental Data
Temperature Range:
Storage: -60°C to +105°C.
Operating: -45°C to +70°C.
Coil Data @ 25°C
wwNowDmC.DinCaaotlialPsSo:hw.9eeeWrt:4atUts..com
AC Coils: 1.2VA.
Maximum Power: 2.0 Watts.
Duty Cycle: Continuous.
Insulation: Class B: (130°C).
Mechanical Data
Mounting: Socket mount, printed circuit board, top flange.
Termination: .187" (4.75mm) quick connect/solder terminals, or
printed circuit terminals.
Enclosure: Smoke-color polycarbonate dust cover.
Weight: 1.8 oz. (51g) approximately.
Dimensions are shown for
720 reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for K10P-11D15-24 electronic component. |
Information | Total 3 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ K10P-11D15-24.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
K10P-11D15-24 | The function is 15 Amp General Purpose Miniature Relay. Tyco Electronics | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
K10P
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |