2506031007H0 Datasheet PDF - Fair-Rite Products
Part Number | 2506031007H0 | |
Description | Chip Beads | |
Manufacturers | Fair-Rite Products | |
Logo | ||
There is a preview and 2506031007H0 download ( pdf file ) link at the bottom of this page. Total 30 Pages |
Preview 1 page No Preview Available ! 15th Edition
27
Board
Components
www.DataSheet4U.com
Fair-Rite Products Corp.
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) FAIR RITE / (845) 895-2055 • FAX: (888) FERRITE / (845) 895-2629 • www.fair-rite.com
(888) 324-7748
(888) 337 -7483
• E-Mail: [email protected]
|
|
38 15th Edition
PC Beads (Surface Mount)
Surface mount PC Beads are supplied in two suppression materials. SMPC Beads are available for 3, 4 and
5 line designs in the high resistivity 44 material for broadband applications and for the higher frequencies in
the new 52 material grade.
Surface mount PC Beads are supplied taped and reeled on 13” reels per EIA 481 and IEC 60286 standards.
These beads can also be supplied not taped and reeled and then are bulk packed. This packing method will
change the last digit of the part number to a “6”.
• The flat wire conductors are oxygen free high conductivity copper, 0.30 x 0.65 mm (.012 x .025”), and a lead-free tin coating. If required
SMPC Beads can be supplied with same size copper conductors but with a tin/lead coating. See page 28 for suggested solder profile for
lead-free components
• The SMPC Beads can withstand a minimum breakdown voltage of 750 Vdc between wires. Leads co-planarity is < 0.10 mm (.004”).
• SMPC Beads are controlled for impedance only. The impedances listed are typical values. Minimum impedance values are specified for
the + marked frequencies.
The minimum guaranteed impedance is the listed impedance less 20%.
The 44 material beads are measured on the 4193A vector Impedance Analyzer. The 52 beads are tested for impedance on the
4191A RF Impedance Analyzer.
• SMPC Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208.
•
After preheating the SMPC Beads to within
requirements of EIA-186-10E, temperature
100
260
+o/C- 5ofotCheansdoldtimereinogft1e0m+p/e-r1atsuerec,otnhdesb. eads
will
meet
the
resistance
to
soldering
• Recommended storage and operating temperature range is -55 oC to 125 oC.
• Suggested land patterns are in accordance with the latest revision of IPC-7351.
• The maximum current rating for the SMPC Beads is 5 amps. The flat wire cross-sectional area is 5% less than the 24 AWG wire size.
• For equivalent PC Beads for through hole designs see pages 36 and 37.
• Performance curves of all SMPC Beads are compiled on the Fair-rite Products CD-ROM.
• Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled.
www.DataSheet4U.com
Fair-Rite Products Corp.
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) FAIR RITE / (845) 895-2055 • FAX: (888) FERRITE / (845) 895-2629 • www.fair-rite.com
(888) 324-7748
(888) 337 -7483
• E-Mail: [email protected]
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 2506031007H0 electronic component. |
Information | Total 30 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 2506031007H0.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
2506031007H0 | The function is Chip Beads. Fair-Rite Products | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
2506
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |