CP0805 Datasheet PDF - AVX Corporation
| Part Number | CP0805 | |
| Description | Thin-Film Directional Couplers | |
| Manufacturers | AVX Corporation | |
| Logo |  |
|
|
There is a preview and CP0805 download ( pdf file ) link at the bottom of this page. Total 5 Pages | ||
Preview 1 page No Preview Available !
Thin-Film Directional Couplers
CP0805 SMD Type
GENERAL DESCRIPTION
ITF (Integrated Thin-Film) TECHNOLOGY
DIMENSIONS:
(Top View)
millimeters (inches)
The ITF SMD Coupler is based on thin-film multilayer technology.
The technology provides a miniature part with excellent high frequency
performance and rugged construction for reliable automatic assembly.
The ITF Coupler is offered in a variety of frequency bands compatible with
various types of high frequency wireless systems.
L
T
W
B
FEATURES
APPLICATIONS
• Small Size: 0805
• Mobile Communications
• Frequency Range: 800MHz - 3GHz • Satellite TV Receivers
• Characteristic Impedance: 50Ω
• GPS
• Operating / Storage Temp.:
-40°C to +85°C
• Power Rating: 3W Continuous
• Vehicle Location Systems
• Wireless LAN’s
• Low Profile
3 • Rugged Construction
• Taped and Reeled
A
0805
L 2.03±0.1 (0.080±0.004)
W 1.55±0.1 (0.061±0.004)
T 0.98±0.1 (0.039±0.004)
A 0.56±0.25 (0.022±0.010)
B 0.35±0.15 (0.014±0.006)
HOW TO ORDER
CP 0805 A 0902 A
S TR
Style
Directional Coupler
Size
0805
Layout Type
(see layout types)
Frequency
MHz
Sub Type
(see layout
sub-types)
Termination Packaging Code
Code
TR = Tape and Reel
W = Nickel/Solder
(Sn/Pb)
**S = Nickel / Lead
Free Solder
RoHS COMPLIANT
(Sn100)
**RoHS Compliant
Pb: Free
Please select correct
termination style
QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR, 4 hours
Recommended Pad Layout Dimensions mm (inches)
2.33
(0.092)
0.60
(0.024)
TERMINATION
Nickel/Solder coating (Sn, Pb) compatible with automatic
wwws.oDldatearSinhgeetet4cUh.ncoolmogies: reflow, wave soldering, vapor phase
and manual.
2.25
0.65 (0.089)
(0.026)
NOTE: Components must be mounted on the board with the white
(Alumina) side DOWN.
50
|
| |
 
Thin-Film Directional Couplers
CP0805 and CP0603 Test Jig
ITF TEST JIG FOR COUPLER TYPES 0805 AND 0603 SMD
GENERAL DESCRIPTION
MEASUREMENT PROCEDURE
This jig is designed for the testing of CP0805 and CP0603
series Directional Couplers using a vector network analyzer.
It consists of a FR4 multi-layer substrate, having 50Ω
microstrips as conducting lines and a ground plane in the
middle layer, located at a distance of 0.2mm from the
microstrips.
The connectors are SMA type (female), ‘Johnson Components
Inc.’ Product P/N: 142-0701-881.
The jig is designed for a full 2-port calibration. LOAD calibration
can be done either by a 50Ω SMA termination, or by soldering
a 50Ω chip resistor at the 50Ω ports.
When measuring a component, it can be either soldered or
pressed by a non-metallic stick until all four ports touch the
appropriate pads. To measure the coupling (and the R. Loss)
place the component on the Port 1 & Port 2 pads. Use two
SMA 50Ω terminations (male) to terminate the ports, which
are not connected to the network analyzer, and connect
the network analyzer to the two ports. A 90° rotation of
the component on its pads allows measuring a second
parameter (I. Loss).
Load & Thru
Connector (1 of 12)
P/N 142-0701-881
Calibration Area
3 Short
Open
Port 1
Coupler 0805
50Ω
Port 2
50Ω
Port 1
Coupler 0603
50Ω
Port 2
50Ω
CP0805 SERIES DIRECTIONAL COUPLERS
Orientation and Tape and Reel Packaging Specification
(Top View)
COUP
RF
IN
50
OHM
RF
OUT
COUP
RF
IN
50
OHM
RF
OUT
TYPE AA
TYPE AB
CP0805xxxxxxSTR (Sn100)
(Top View)
COUP
RF
IN
50
OHM
COUP
RF
OUT
RF
IN
50
OHM
RF
OUT
TYPE AA
TYPE AB
COUP
RF
IN
50
OHM
RF
OUT
COUP
RF
IN
50
OHM
RF
OUT
COUP
RF
IN
50
OHM
RF
OUT
TYPE AC
www.DataSheet4U.com
TYPE AD
TYPE AE
RF
IN
RF
OUT
COUP
50
OHM
RF
IN
RF
OUT
COUP
50
OHM
RF
IN
RF
OUT
COUP
50
OHM
TYPE BA
TYPE BB
TYPE BC
The parts should be mounted on the PCB with White (Alumina)
side down and the "dark" side up.
COUP
RF
IN
50
OHM
RF
OUT
COUP
RF
IN
50
OHM
RF
OUT
COUP
RF
IN
50
OHM
RF
OUT
TYPE AC
TYPE AD
TYPE AE
RF
IN
RF
OUT
COUP
50
OHM
RF
IN
RF
OUT
COUP
50
OHM
RF
IN
RF
OUT
COUP
50
OHM
TYPE BA
TYPE BB
TYPE BC
The parts should be mounted on the PCB with printed side up.
54
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for CP0805 electronic component. |
| Information | Total 5 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ CP0805.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| CP0805 | The function is Thin-Film Directional Couplers. AVX Corporation | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
CP08
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||