AAT1409 Datasheet PDF - Analogic Corporation
Part Number | AAT1409 | |
Description | 8 Channel LED Backlight Driver | |
Manufacturers | Analogic Corporation | |
Logo | ||
There is a preview and AAT1409 download ( pdf file ) link at the bottom of this page. Total 18 Pages |
Preview 1 page No Preview Available ! DataSheet.in
PRODUCT DATASHEET
AAT1409
SwitchRegTM 8 Channel LED Backlight Driver with Integrated Boost and High Frequency Direct PWM Dimming
General Description
The AAT1409 is a highly integrated, high efficiency LED
backlight solution for notebook computers, monitors and
portable TVs. The device operates from DC inputs, ciga-
rette lighter adapters, or multi-cell Li-ion batteries over
the 4.5V to 26V voltage range.
An integrated boost (step-up) converter provides up to
45V output for driving series LEDs. Eight precision cur-
rent sinks are programmed up to 45mA per string
through one external RSET resistor, supporting up to 881
white LEDs at 360mA total output current.
LED strings may be disabled or operated in parallel for
increased drive capability. The boost output voltage is
set by the LED string with the highest voltage require-
ment, allowing a wide range of LED characteristics.
The PWM dimming range at 100Hz is up to 1,000:1.
The boost switching frequency is selectable (up to
1.3MHz) to allow optimum efficiency and the smallest
external L/C filtering components. Alternatively, the
device may be synchronized to an external clock.
Boost current mode control provides fast response to
line and load transients. Integrated Light-Load mode
ensures highest efficiency across the entire load range.
Fault tolerant circuitry extends system life by disabling
open LED strings. The unique high voltage current sinks
prevent damage resulting from shorted LEDs.
The AAT1409 is available in the Pb-free, thermally
enhanced 24-pin 3x4 TQFN package.
Features
• VIN Range: 4.5V to 5.5V / 5.0V to 26.0V
• LX Rated to 50V
• Maximum IOUT: 360mA
• Up to 92% Efficiency
• High Efficiency Light-Load Mode
• 8 LED Current Sinks up to 45mA/each
▪ ±2% Accuracy (21mA)
▪ ±2% Matching (21mA)
• Flexible Configurations
▪ Disable or Parallel
• Switching Frequency Options
▪ 675kHz or 1.3MHz
▪ Synchronize to System Clock
• PWM Direct Dimming Input
▪ Up to 100kHz Prevents Audio Interference
▪ Fast Turn-On/Off
▪ Wide 1,000:1 Dimming Range (100Hz)
• Fault Tolerant: Open/Short LED(s)
• Current Limit Protection
• Over-Voltage Protection
• Over-Temperature Protection
• Soft-Start Minimizes Inrush Current
• TQFN34-24 Low Profile Package
• -40°C to +85°C Temperature Range
Applications
• Monitors
• Notebook Computers
• Portable TV
• Portable DVD Players
• White LED Backlight
1. The maximum number of LEDs in each string is dependent upon the maximum VF of the diodes in that string. Under no event should the voltage at LX be exceeded.
1409.2010.05.1.1
www.analogictech.com
1
|
|
DataSheet.in
PRODUCT DATASHEET
AAT1409
SwitchRegTM 8 Channel LED Backlight Driver with Integrated Boost and High Frequency Direct PWM Dimming
Electrical Characteristics1
VIN = 12V; CIN = 4.7μF, COUT = 2.2μF; CVCC = 2.2μF; L1 = 10μH; RSET =7.5kΩ (ICSx = 21mA); TA = -40oC to 85oC unless
otherwise noted. Typical values are at TA = 25oC.
Symbol Description
Power Supply, Current Sinks
VIN Input Voltage Range
VUVLO
Under Voltage Threshold
VCC
VCX
IQ
ISD
ICSx
ICSx-Matching
VOVP
RDS(ON)LO
DMAX
TMIN
ICSx / IRSET
ILIMIT
ILEAK
VCC Output Voltage
Current Sink Voltage
IN Quiescent Current (no switching)
IN Pin Shutdown Current
Current Sink Accuracy
Current Matching Between Any Sink Channel
Over-Voltage Threshold
Over-Voltage Hysteresis
Low Side Switch On Resistance
Maximum Duty Cycle
Minimum On-Time
Current Set Ratio
Low Side Switch Current Limit
LX Pin Leakage
CSx Pin Leakage
FOSC
Oscillator Frequency
FSYNC
Sync Frequency
FSYNC
Sync Duty Cycle Range
FPWM(MAX) Maximum Direct PWM Frequency
TSS Soft-Start Time
Logic Level Inputs: EN Pin
VEN(L)
Threshold Low
VEN(H)
Threshold High
ILEN Input Leakage Enable Pin
Logic Level Inputs: SYNC, PWM, FSET Pins
V(H) Threshold Low
V(H) Threshold High
ILK Input Leakage
TPWM(ON/OFF) PWM Turn On/Off Delay
Thermal Protection
TJ(SD)
TJ(HYS)
TJ Thermal Shutdown Threshold
TJ Thermal Shutdown Hysteresis
Conditions
VIN = VCC
VCC = Open
VIN Rising
Hysteresis
VIN Falling
EN = Logic High, ICC(OUT) = 0mA
EN = Logic High, ICSx = 21mA (RSET =
7.5kΩ)
ICSx = 0% , VCSx = 0.5V, EN = Logic High
CS1-CS8 = Open, EN = Logic Low, does
not include LX leakage current
ICSx = 21mA
ICSx = 21mA
VOUT Rising
VOUT Falling
VCC = 4.5V
ICSx/IRSET , VRSET = 0.6V
EN = Logic Low; VLX = 40V
EN = Logic Low, CSx = 30V
FSET = Logic Low; VIN = 5.0 to 26.0V;
VIN = VCC = 4.5 to 5.5V
FSET = Logic High; VIN = 5.0 to 26.0V;
VIN = VCC = 4.5 to 5.5V
FOSC ± 20%
VOUT = 35V, CCOMP = 18nF, RCOMP = 10kΩ
VEN = 5V, VIN = 5V
VSYNC = VPWM = VFSET = 5V
PWM transition to 95%/5% IRSET
Min
4.5
5.0
3.2
4.0
-5
-3
1.1
90
3.0
550
1100
10
2.5
1.4
-1
Typ
500
4.5
0.5
1.5
±2
±2
1.2
100
200
100
262
675
1300
FOSC
±20%
50
1
1
140
15
Max
5.5
26.0
4.3
6
40.0
+5
+3
1.3
6.5
1
10
800
1500
90
100
0.4
3
0.4
1
Units
V
V
mV
V
V
V
mA
μA
%
%
V
mV
mΩ
%
ns
A/A
A
μA
μA
kHz
kHz
kHz
%
kHz
ms
V
V
μA
V
V
μA
μs
°C
°C
1. The AAT1409 is guaranteed to meet performance specifications over the -40°C to +85°C operating temperature range and is assured by design, characterization, and correla-
tion with statistical process controls.
2. Output voltage must result in a voltage lower than the LX maximum rating under all operating conditions.
1409.2010.05.1.1
www.analogictech.com
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AAT1409 electronic component. |
Information | Total 18 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ AAT1409.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
AAT1401 | The function is Serial LED Driver. Skyworks | |
AAT1401 | The function is FOUR-CHANNEL DIGITAL STILL CAMERA POWER SUPPLY. AAT | |
AAT1403A | The function is SIX-CHANNEL DIGITAL STILL CAMERA POWER SUPPLY. Advanced Analog Technology | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AAT1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |