OKI-78SR Datasheet PDF - Murata Manufacturing
Part Number | OKI-78SR | |
Description | Fixed Output 1.5 Amp SIP DC/DC Converters | |
Manufacturers | Murata Manufacturing | |
Logo | ||
There is a preview and OKI-78SR download ( pdf file ) link at the bottom of this page. Total 10 Pages |
Preview 1 page No Preview Available ! www.murata-ps.com
OKI-78SR Serieswww.DataSheet4U.com
Fixed Output 1.5 Amp SIP DC/DC Converters
Typical unit
FEATURES
■ Ultra wide 7 to 36 VDC input range
■ Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
■ Vertical SIP-mount, small footprint package
■ “No heat sink” direct replacement for 3-terminal
78xx-series linear regulators
■ High efficiency with no external components
■ Short circuit protection
■ Outstanding thermal derating performance
■ UL/EN/IEC 60950-1, 2nd Edition safety approvals
(pending)
PRODUCT OVERVIEW
Fabricated on a 0.41 by 0.65 inch (10.4 by 16.5
mm) Single Inline Package (SIP) module, the OKI-
78SR series are non-isolated switching regulator
(SR) DC/DC power converters for embedded ap-
plications. The fixed single output converters offer
both tight regulation and high efficiency directly
at the power usage site and are a direct plug-in
replacement for TO-220 package 78xx series linear
regulators. Typically, no extra outside components
are required.
Two nominal output voltages are offered (3.3
and 5 VDC), each with 1.5 Amp maximum output.
Based on fixed-frequency buck switching topology,
the high efficiency means very low heat and little
electrical noise, requiring no external components.
The ultra wide input range is 7 to 36 Volts DC.
Protection features include input undervoltage
and short circuit protection, overcurrent and over
temperature shut down. The OKI-78SR is designed
to meet all standards approvals. RoHS-6 (no lead)
hazardous material compliance is specified as
standard.
Contents
Description, Connection Diagram, Photograph
Ordering Guide, Model Numbering, Product Labeling
Mechanical Specifications, Input/Output Pinout
Detailed Electrical Specifications
Performance Data and Oscillograms
Soldering Guidelines, Application Notes
Page
1
2
3
4
5
9
+Vin
F1
External
DC
Power
Source
Connection Diagram
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Amplifier
+Vout
Common
Figure 1. OKI-78SR
Note: Murata Power Solutions strongly recommends an external input fuse, F1.
See specifications.
Common
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
email: [email protected]
21 May 2010 MDC_OKI-78SR-W36.A01 Page 1 of 10
|
|
OKI-78SR Serieswww.DataSheet4U.com
Fixed Output 1.5 Amp SIP DC/DC Converters
PERFORMANCE DATA – OKI-78SR3.3/1.5-W36
Efficiency vs. Line Voltage and Load Current @ +25˚C. (Vout = Vnom.)
100
90
80
70
60
50
40
30
20
10
0
0
VIN = 7V
VIN = 12V
VIN = 36V
0.2 0.4 0.6 0.8
1
1.2 1.4 1.6
Load Curre nt (Amps)
Output Ripple and Noise (Vin=7V, Vout=nominal, Iout=1.6A, Cload=0, Ta=+25˚C.,
ScopeBW=100MHz)
Maximum Current Temperature Derating at sea level (Vin=7V. to 36V.)
2.00
65 LFM
1.00
0.00
20 25 30 35 40 45 50 55 60 65 70 75 80 85
Ambient Temperature (ºC)
Output Ripple and Noise (Vin=12V, Vout=nominal, Iout=1.6A, Cload=0, Ta=+25˚C.,
ScopeBW=100MHz)
Output Ripple and Noise (Vin=36V, Vout=nominal, Iout=1.6A, Cload=0, Ta=+25˚C.,
ScopeBW=100MHz)
www.murata-ps.com
email: [email protected]
21 May 2010 MDC_OKI-78SR-W36.A01 Page 5 of 10
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for OKI-78SR electronic component. |
Information | Total 10 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Product Image and Detail view | 1. 1.5 Amp SIP DC/DC Converter [ Learn More ] | |
Download | [ OKI-78SR.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
OKI-78SR | The function is Fixed Output 1.5 Amp SIP DC/DC Converters. Murata Manufacturing | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
OKI-
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |