|
|
PDF SN8P2613 Data sheet ( Hoja de datos )
| Número de pieza | SN8P2613 | |
| Descripción | 8-Bit Micro-Controller | |
| Fabricantes | SONiX Technology Company | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SN8P2613 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
SN8P2610 Series
USER’S MANUAL
Preliminary V 1.3
www.DataSheet4U.com
SN8P2613
SN8P2612
SN8P2611
SN8P2610 Series
8-Bit Micro-Controller
SONiX 8-Bit Micro-Controller
SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Page 1
Version 1.3
1 page  
SN8P2610 Series
8-Bit Micro-Controller
6.5 PUSH, POP ROUTINE .................................................................................................................... 60
6.6 INT0 (P0.0) INTERRUPT OPERATION......................................................................................... 61
6.7 INT1 (P0.1) INTERRUPT OPERATION......................................................................................... 63
6.8 T0 INTERRUPT OPERATION ....................................................................................................... 64
6.9 TC0 INTERRUPT OPERATION..................................................................................................... 65
6.10 MULTI-INTERRUPT OPERATION............................................................................................... 66
77 I/O PORT ................................................................................................................................................ 67
7.1 I/O PORT MODE ............................................................................................................................. 67
7.2 I/O PULL UP REGISTER ................................................................................................................ 68
7.3 I/O OPEN-DRAIN REGISTER........................................................................................................ 69
www7.D.4ataSheIe/Ot4UP.cOomRT DATA REGISTER .......................................................................................................... 70
88 TIMERS .................................................................................................................................................. 71
8.1 WATCHDOG TIMER...................................................................................................................... 71
8.2 TIMER 0 (T0) ................................................................................................................................... 73
8.2.1 OVERVIEW .............................................................................................................................. 73
8.2.2 T0M MODE REGISTER........................................................................................................... 73
8.2.3 T0C COUNTING REGISTER................................................................................................... 74
8.2.4 T0 TIMER OPERATION SEQUENCE ..................................................................................... 75
8.3 TIMER/COUNTER 0 (TC0) ............................................................................................................ 76
8.3.1 OVERVIEW .............................................................................................................................. 76
8.3.2 TC0M MODE REGISTER ........................................................................................................ 77
8.3.3 TC0C COUNTING REGISTER ................................................................................................ 78
8.3.4 TC0R AUTO-LOAD REGISTER .............................................................................................. 79
8.3.5 TC0 CLOCK FREQUENCY OUTPUT (BUZZER) .................................................................. 80
8.3.6 TC0 TIMER OPERATION SEQUENCE .................................................................................. 81
8.4 PWM0 MODE .................................................................................................................................. 83
8.4.1 OVERVIEW .............................................................................................................................. 83
8.4.2 TCxIRQ and PWM Duty ........................................................................................................... 84
8.4.3 PWM Duty with TCxR Changing.............................................................................................. 85
8.4.4 PWM PROGRAM EXAMPLE .................................................................................................. 86
99 INSTRUCTION TABLE ....................................................................................................................... 87
1100 ELECTRICAL CHARACTERISTIC .............................................................................................. 88
10.1 ABSOLUTE MAXIMUM RATING ................................................................................................ 88
10.2 ELECTRICAL CHARACTERISTIC............................................................................................... 88
10.3 CHARACTERISTIC GRAPHS ....................................................................................................... 89
1111 OTP PROGRAMMING PIN............................................................................................................. 90
SONiX TECHNOLOGY CO., LTD
Page 5
Version 1.3
5 Page 
SN8P2610 Series
8-Bit Micro-Controller
1.4 PIN DESCRIPTIONS
PIN NAME
VDD, VSS
P1.5/RST/VPP
P1.6/XIN
www.DataSheet4U.com
P1.4/XOUT
P0.0/INT0
P0.1/INT1
P1.0
P1 [3:1], P1.7
P5 [7:0]
P5.4/BZ0/PWM0
TYPE
P
I, P
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
DESCRIPTION
Power supply input pins for digital circuit.
P1.5: Input only pin (Schmitt trigger) if disable external reset function.
P1.5 without build-in pull-up resister.
P1.5 is input only pin without pull-up resistor under P1.5 mode. Add the 100
ohm external resistor on P1.5, when it is set to be input pin.
Built-in wakeup function.
RST: System reset input pin. Schmitt trigger structure, low active, normal stay to
“high”.
VPP: OTP programming pin.
Port 1.6 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Built-in wakeup function.
Oscillator input pin while external oscillator enable (crystal and RC).
Port 1.4 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Built-in wakeup function.
XOUT: Oscillator output pin while external crystal enable.
Port 0.0 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Built-in wakeup function.
INT0 trigger pin (Schmitt trigger).
TC0 event counter clock input pin.
Port 0.1 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Built-in wakeup function.
INT1 trigger pin (Schmitt trigger).
Port P1.0 bi-direction pins and open-drain pin. Schmitt trigger structure as input
mode.
Built-in pull-up resisters.
Built-in wakeup function
Bi-direction pins. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Built-in wakeup function
Bi-direction pins. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Port 5.4 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
TC0 ÷ 2 signal output pin for buzzer or PWM0 output pin.
SONiX TECHNOLOGY CO., LTD
Page 11
Version 1.3
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet SN8P2613.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SN8P2610 | 8-Bit Micro-Controller | SONiX Technology Company |
| SN8P2611 | 8-Bit Micro-Controller | SONiX Technology Company |
| SN8P2612 | 8-Bit Micro-Controller | SONiX Technology Company |
| SN8P2613 | 8-Bit Micro-Controller | SONiX Technology Company |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |