ICS181-52 Datasheet PDF - Integrated Circuit Systems
Part Number | ICS181-52 | |
Description | Low EMI Clock Generator | |
Manufacturers | Integrated Circuit Systems | |
Logo | ||
There is a preview and ICS181-52 download ( pdf file ) link at the bottom of this page. Total 6 Pages |
Preview 1 page No Preview Available ! ICS181-52
Low EMI Clowcwkw.DGataeSnheeetr4Ua.ctoomr
Description
The ICS181-52 generates a low EMI output clock from
a clock or crystal input. The device uses ICS’
proprietary mix of analog and digital Phase Locked
Loop (PLL) technology to spread the frequency
spectrum of the output, thereby reducing the frequency
amplitude peaks by several dB.
The ICS181-52 offers center spread selection of
+/-0.625% and +/-1.875%. Refer to the MK1714-01/02
for the widest selection of input frequencies and
multipliers.
ICS offers a complete line of EMI reducing clock
generators. Consult us when you need to remove
crystals and oscillators from your board.
Features
• Pin and function compatible to Cypress W181-52
• Packaged in 8-pin SOIC
• Provides a spread spectrum output clock
• Accepts a clock input and provides same frequency
dithered output
• Input frequency of 28 to 48 MHz for Clock input
• Peak reduction by 7dB - 14dB typical on 3rd - 19th
odd harmonics
• Spread percentage selection for +/-0.625% and
+/-1.875%
• Operating voltage of 3.3 V and 5 V
• Advanced, low-power CMOS process
Block Diagram
VDD
FS1
SSON#
SS%
X1/CLKIN
X2
Clock Buffer/
Crystal
Oscillator
PLL Clock
Synthesis
and Spread
Spectrum
Circuitry
CLK
GND
MDS 181-52 A
1
Revision 110404
Integrated Circuit Systemsl525 Race Street, San Jose, CA 95126 l tel (408) 297-1201 l www.icst.com
|
|
ICS181-52
LOW EMI CLOCK GENERATOR
www.DataSheet4U.com
AC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V±5% or 5 V±10%, Ambient Temperature 0 to +70° C, CL=15 pf
Parameter
Symbol
Conditions
Min. Typ. Max. Units
Input/Output Clock Frequency
28 48 MHz
Input Crystal Frequency
28 40 MHz
Input Clock Duty Cycle
Time above VDD/2
40
60 %
Output Clock Duty Cycle
Note 1
40 50 60 %
Output Rise Time
Output Fall Time
Jitter
tOR 0.8 to 2.4 V, note 1
tOF 2.4 to 0.8 V, note 1
Cycle-to-cycle
2 5 ns
2 5 ns
250 300 ps
Note 1: Measured with 15 pF load
Thermal Characteristics
Parameter
Symbol Conditions Min. Typ. Max. Units
Thermal Resistance Junction to
Ambient
θJA Still air
θJA 1 m/s air flow
θJA 3 m/s air flow
Thermal Resistance Junction to Case θJC
150 °C/W
140 °C/W
120 °C/W
40 °C/W
Marking Diagram
85
Notes:
1. ###### is the lot number.
181M-52
######
YYWW
2. YYWW is the last two digits of the year and week
that the part was assembled.
3. “LF” denotes Pb (lead) free package.
4. Bottom marking: country of origin.
14
Marking Diagram (Pb free)
85
181M52LF
######
YYWW
14
MDS 181-52 A
5
Revision 110404
Integrated Circuit Systemsl 525 Race Street, San Jose, CA 95126 l tel (408) 297-1201l www.icst.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ICS181-52 electronic component. |
Information | Total 6 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ ICS181-52.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
ICS181-51 | The function is Low EMI Clock Generator. Integrated Circuit Systems | |
ICS181-52 | The function is Low EMI Clock Generator. Integrated Circuit Systems | |
ICS181-53 | The function is Low EMI Clock Generator. Integrated Circuit Systems | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
ICS1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |