|
|
PDF AXA005A0X Data sheet ( Hoja de datos )
| Número de pieza | AXA005A0X | |
| Descripción | 12V SIP Non-isolated Power Modules | |
| Fabricantes | Lineage Power Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AXA005A0X (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
Data Sheet
April 1, 2008
www.DataSheet4U.com
Austin MicrolynxTM 12V SIP Non-isolated Power Modules:
10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 5A Output Current
RoHS Compliant
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 5A output current
High efficiency – 89% at 3.3V full load (VIN = 12.0V)
Small size and low profile:
22.9 mm x 10.2 mm x 6.65 mm
(0.9 in x 0.4 in x 0.262 in)
Low output ripple and noise
High Reliability:
Calculated MTBF = 5.6M hours at 25oC Full-load
Output voltage programmable from 0.75 Vdc to
5.5Vdc via external resistor
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-
03 Certified, and VDE‡ 0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin MicroLynxTM 12Vdc SIP (single in-line package) power modules are non-isolated dc-dc converters that can
deliver up to 5A of output current with full load efficiency of 89% at 3.3V output. These modules provide precisely
regulated output voltage programmable via external resistor from 0.75Vdc to 5.5Vdc over a wide range of input
voltage (VIN = 10 - 14V). Their open-frame construction and small footprint enable designers to develop cost- and
space-efficient solutions. Standard features include remote On/Off, programmable output voltage and overcurrent
protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-101 ver. 1.31
PDF name: microlynx_12v_sip_ds.pdf
1 page  
Data Sheet
April 1, 2008
Austin MicroLynxTM 12V SIP Non-isolated Power Modules:
10 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 5A wowuwt.pDuattacShuererte4Un.tcom
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter
Device Symbol
Min
Typ
Max
Unit
Remote On/Off Signal interface
(VIN=VIN, min to VIN, max; Open collector pnp or equivalent
Compatible, Von/off signal referenced to GND
See feature description section)
Logic Low (On/Off Voltage pin open - Module ON)
Von/Off
All
VIL
――
0.4
V
Ion/Off
All IIL ― ― 10 μA
Logic High (Von/Off > 2.5V – Module Off)
Von/Off
All VIH ― ― VIN, max V
Ion/off
All IIH ― ― 1 mA
Turn-On Delay and Rise Times
(IO=IO, max , VIN = VIN, nom, TA = 25 oC, )
Case 1: On/Off input is set to Logic Low (Module
ON) and then input power is applied (delay from
instant at which VIN =VIN, min until Vo=10% of Vo,set)
Case 2: Input power is applied for at least one second
and then the On/Off input is set to logic Low (delay from
instant at which Von/Off=0.3V until Vo=10% of Vo, set)
Output voltage Rise time (time for Vo to rise from 10%
of Vo,set to 90% of Vo, set)
Output voltage overshoot – Startup
IO= IO, max; VIN = 10.0 to 14Vdc, TA = 25 oC
Overtemperature Protection
(See Thermal Consideration section)
All
All
All
All
Tdelay
Tdelay
―
―
3
3
Trise
Tref
―4
―
⎯ 140
― msec
― msec
6 msec
1 % VO, set
⎯ °C
Input Undervoltage Lockout
Turn-on Threshold
All 8.2 V
Turn-off Threshold
All 8.0 V
LINEAGE POWER
5
5 Page 
Data Sheet
April 1, 2008
Austin MicroLynxTM 12V SIP Non-isolated Powwwwe.rDMataoSdhueelte4sU:.com
10 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 5A output current
Design Considerations (continued)
Output Filtering
The Austin MicroLynxTM 12V SIP module is designed
for low output ripple voltage and will meet the
maximum output ripple specification with 1 µF
ceramic and 10 µF polymer capacitors at the output of
the module. However, additional output filtering may
be required by the system designer for a number of
reasons. First, there may be a need to further reduce
the output ripple and noise of the module. Second,
the dynamic response characteristics may need to be
customized to a particular load step change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional
capacitance at the output can be used. Low ESR
polymer and ceramic capacitors are recommended to
improve the dynamic response of the module. For
stable operation of the module, limit the capacitance
to less than the maximum output capacitance as
specified in the electrical specification table.
Safety Considerations
For safety agency approval the power module must
be installed in compliance with the spacing and
separation requirements of the end-use safety agency
standards, i.e., UL 60950-1, CSA C22.2 No. 60950-1-
03, and VDE 0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power
module has extra-low voltage (ELV) outputs when all
inputs are ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 6A in the
positive input lead.
LINEAGE POWER
11
Document No: DS03-101 ver. 1.31
PDF name: microlynx_12v_sip_ds.pdf
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet AXA005A0X.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AXA005A0X | 12V SIP Non-isolated Power Modules | Lineage Power Corporation |
| AXA005A0XZ | 12V SIP Non-isolated Power Modules | Lineage Power Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |