|
|
Número de pieza | AMIS-710330 | |
Descripción | 300dpi CIS Two-Level Digital Output Module | |
Fabricantes | AMI SEMICONDUCTOR | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AMIS-710330 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! AAMMISI-7S10330: 300dpi CIS Two-Level Digital Output Module
Data Sheet
1.0 General Description
The AMIS-710330 (PI330MC-DR) is a contact image sensor (CIS) module with an additional on board circuit, which digitizes the analog
pixels from the CIS image sensor to a “background-tracking”, two-level digital output signal. The module uses MOS image sensor
technology to gain high-speed performance and high sensitivity. The AMIS-710330 is suitable for scanning documents with widths of
89mm and resolutions of 11.8 dots per millimeter (dpm). It has broad applications but is specifically designed for the following areas:
• Where data compression is required, such as in data transmissions.
• Where component pin-out count must be kept to a minimum.
The background-tracking-digitizing circuits in the AMIS-710330 have been referred to as the “dynamic threshold” two-level A/D
converter. For the purpose of describing the module’s characteristics, this “dynamic threshold” processing circuit shall herein be
referred to as the “tracking digitizer”.
2.0 Key Features
• Light source, lens and sensor are integrated into a single module
• 11.8dpm resolution, 89mm scanning length
• Up to 423µsec/line scanning speed, with 2.5MHz pixel rate (see Table 3, Note 3)
• Wide dynamic range
• Two-level tracking digital output (“dynamic threshold digitizer”)
• Infared light source 880nm (other colors are available)
• Compact size ≅ 13mm x 25.6mm x 102mm
• Low power
• Light weight
3.0 Module Description
www.DataSheet4U.com
Figure 1: Block Diagram
AMI Semiconductor – Jun. 06, M-20586-001
www.amis.com
1
1 page AAMMISI-7S10330: 300dpi CIS Two-Level Digital Output Module
Data Sheet
Table 3: Recommended Operating Conditions
Item
Symbol
Min.
Mean
Max.
Units
Power supply
Vdd 5.0
V
Vn. -10
-5
VLED
24(1)
V
V
Idd 25
mA
Ivn 15
mA
ILED
60
mA
Input voltage at digital high
Vih
Vdd-1.0
Vdd-0.5
Vdd
V
Input voltage at digital low
Vil 0
0.8 V
Clock frequency
f
2.5 MHz
Clock pulse high duty cycle
Clock pulse high duration
Integration time
Operating temperature
Clock
Tint
Top
25
100 (2)
0.423(3)
25
50
%
ns
ms
°C
Notes:
(1) VLED sources are also available in 5V.
(2) Clock pulse high is specified at 2.5MHz at 25 percent duty.
(3) The tint is specified with a 2.5MHz clock frequency. In operation, the time constants in the reference generator are set to match the initial exposure time, hence
the time constant will determine the optimum integration time. Accordingly, it is highly recommended that the parameters be factory adjusted for the specific
applications.
7.0 Switching Characteristics at 25°C
www.DataSheet4U.com
Figure 4: Module Timing Diagram
AMI Semiconductor – Jun. 06, M-20586-001
www.amis.com
5
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet AMIS-710330.PDF ] |
Número de pieza | Descripción | Fabricantes |
AMIS-710330 | 300dpi CIS Two-Level Digital Output Module | AMI SEMICONDUCTOR |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |