SMT20C2-00SADJJ Datasheet PDF - Emerson
| Part Number | SMT20C2-00SADJJ | |
| Description | DC-DC / Non-Isolated | |
| Manufacturers | Emerson | |
| Logo |  |
|
|
There is a preview and SMT20C2-00SADJJ download ( pdf file ) link at the bottom of this page. Total 4 Pages | ||
Preview 1 page No Preview Available !
SIL/SMT20C2 Series
4.5 Vin to 13.8 V Single Output
DC-DC CONVERTERS C Class Non-isolated
• 20 A current rating
• Input voltage range: 4.5-13.8 V
• Output voltage: 0.59-5.1 V
• Industry leading value
• Cost optimized design
• Excellent transient response
• Output enable
• Output voltage adjustability
• Pathway for future upgrades
• Supports silicon voltage migration
• Resulting in reduced design-in and qual time
• Current sink capability
• RoHS compliant
The SIL/SMT20C2 series is a new high density, open frame, non-isolated
converter for space sensitive applications. This model has a wide input range
(4.5-13.8 Vdc) and offers a wide 0.59-5.1 V output voltage range with 20 A
load capability. An external resistor adjusts the output voltage from its pre-set
value of 0.59 V to any value up to the 5 V maximum. Typical efficiencies for
the models are 93% for the 12 V input version. The series offers remote ON/
OFF and over-current protection as standard.
All specifications are typical at nominal input, full load at 25 °C, unless otherwise stated
August 27, 2008
1
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output voltage
(See Note 5)
Output setpoint
accuracy
0.1% trim resistors
Line regulation
Low line to high line
Load regulation
Full load to min. load
Min/max load
Overshoot
At turn-on
Undershoot
At turn-off
Ripple and noise
5 Hz to 20 MHz
(See Note 1)
Transient response (See Notes 1, 2)
INPUT SPECIFICATIONS
Input voltage range
Input current
Minimum load
Remote OFF
Input current (max.) (See Note 3)
Start-up time
Remote ON/OFF
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2
0.59-5.1 V
±1.0%
±0.2%
±0.5%
0 A/20 A
0.5% max.
100 mV max.
30 mV
Vin = 5 V, Vout = 2.5 V
130 mV max. deviation
50 μs recovery within
regulation band
4.5-13.8 Vdc
50 mA
5 mA
18 A @ Io max.
3 ms
GENERAL SPECIFICATIONS
Efficiency
Vin=5 V, Vo=2.5 V, lo=20 A
Switching frequency Fixed
Approvals and
standards (pending)
Material flammability
Weight
MTBF
12 V @ 40 °C
100% load
Bellcore 332
Coplanarity
90%
750 kHz
EN60950
UL/cUL6950
UL94V-0
8.50 g/0.3 oz.
6,721,853 hours
150 μm
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient,
(See Note 5)
temperature
Non-operating
PROTECTION
Short-circuit
Overvoltage protection
0 °C to +70 °C
-40 °C to +125 °C
Hiccup, non-latching
Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance
(See Note 6)
Output capacitance (See Note 7)
0 μF
0 μF
TÜV Product Service (EN60950)
CB report and certificate to IEC60950
File Name: sil/smt20c2.pdf Rev: 27 Aug 2008
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SMT20C2-00SADJJ electronic component. |
| Information | Total 4 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ SMT20C2-00SADJJ.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| SMT20C2-00SADJJ | The function is DC-DC / Non-Isolated. Emerson | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
SMT2
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||