What is SPE0505?

This electronic component, produced by the manufacturer "SYNC POWER", performs the same function as "5-Line ESD Protection Array".

SPE0505 Datasheet PDF - SYNC POWER

Part Number SPE0505
Description 5-Line ESD Protection Array
Manufacturers SYNC POWER 

There is a preview and SPE0505 download ( pdf file ) link at the bottom of this page.

Total 7 Pages

Preview 1 page

No Preview Available ! SPE0505 datasheet, circuit

5-Line ESD Protection Array
The SPE0505 are designed by TVS array that is to protect
sensitive electronics from damage or latch-up due to ESD.
They are designed for use in applications where board
space is at a premium. SPE0505 will protect up to five
lines, and may be used on lines where the signal polarities
swing above and below ground.
SPE0505 offer desirable characteristics for board level
protection including fast response time, low operating and
clamping voltage, and no device degradation.
SPE0505 may be used to meet the immunity requirements
of IEC 61000-4-2, level 4. The small SOT-23-6L package
makes them ideal for use in portable electronics such as
cell phones, PDA’s, notebook computers, and digital
‹ Cellular Handsets and Accessories
‹ Cordless Phone
‹ Notebooks and Handhelds
‹ Portable Instrumentation
‹ Digital Cameras
‹ MP3 Player
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
‹ Protects five I/O lines
‹ Working voltage: 5V
‹ Low leakage current
‹ Low operating and clamping voltages
2006/03/28 Ver.4
Page 1

SPE0505 equivalent
5-Line ESD Protection Array
Device Connection for Protection of Five Data Lines
SPE0505 is designed to protect up to five data lines. The device is connected as follows:
1. The TVS protection of five I/O lines is achieved by connecting pins 1, 3, 4, 5, and 6 to the data lines. Pin 2 is
connected to ground. The ground connection should be made directly to the ground plane for best results. The
path length is kept as short as possible to reduce the effects of parasitic inductance in the board traces.
Circuit Board Layout Recommendations for Suppression of ESD
Good circuit board layout is critical for the suppression of ESD induced transients. The following guidelines are
1. Place the TVS near the input terminals or connectors to restrict transient coupling.
2. Minimize the path length between the TVS and the protected line.
www3..DMataiSnhimeeit4zUe.caollmconductive loops including power and ground loops.
4. The ESD transient return path to ground should be kept as short as possible.
5. Never run critical signals near board edges
6. Use ground planes whenever possible.
2006/03/28 Ver.4
Page 5


Preview 5 Page

Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SPE0505 electronic component.

Information Total 7 Pages
Link URL [ Copy URL to Clipboard ]
Download [ SPE0505.PDF Datasheet ]

Share Link :

Electronic Components Distributor

An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop

Featured Datasheets

Part NumberDescriptionManufacturers
SPE0504The function is 4-Line ESD Protection Array.SYNC POWER
SPE0505The function is 5-Line ESD Protection Array.SYNC POWER
SPE0506The function is 5-Line ESD Protection Array.SYNC POWER

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  

Quick jump to:

SPE0     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    

Privacy Policy   |    Contact Us     |    New    |    Search