FAN73932 Datasheet PDF - Fairchild Semiconductor
| Part Number | FAN73932 | |
| Description | Half-Bridge Gate Drive IC | |
| Manufacturers | Fairchild Semiconductor | |
| Logo |  |
|
|
There is a preview and FAN73932 download ( pdf file ) link at the bottom of this page. Total 14 Pages | ||
Preview 1 page No Preview Available !
June 2009
FAN73932
Half-Bridge Gate Drive IC
Features
Floating Channel for Bootstrap Operation to +600V
Typically 2.0A/2.0A Sourcing/Sinking Current Driving
Capability
Extended Allowable Negative VS Swing to -9.8V for
Signal Propagation at VBS=15V
High-Side Output in Phase of IN Input Signal
3.3V and 5V Input Logic Compatible
Matched Propagation Delay for Both Channels
Cycle-by-Cycle Edge-Triggered Shutdown Function
Built-in UVLO Functions for Both Channels
Built-in Common-Mode dv/dt Noise Canceling Circuit
Internal 400ns Minimum Dead-Time
Applications
High-Speed Power MOSFET and IGBT Gate Driver
Induction Heating
High-Power DC-DC Converter
Synchronous Step-Down Converter
Motor Drive Inverter
www.DataSheet4U.com
Description
The FAN73932 is a half-bridge, gate-drive IC with shut-
down and dead-time functions which can drive high-
speed MOSFETs and IGBTs that operate up to +600V. It
has a buffered output stage with all NMOS transistors
designed for high pulse current driving capability and
minimum cross-conduction.
Fairchild’s high-voltage process and common-mode
noise canceling techniques provide stable operation of
the high-side driver under high dv/dt noise circum-
stances. An advanced level-shift circuit offers high-side
gate driver operation up to VS=-9.8V (typical) for
VBS=15V.
The UVLO circuit prevents malfunction when VDD and
VBS are lower than the specified threshold voltage.
The high-current and low-output voltage drop feature
makes this device suitable for all kinds of half- and full-
bridge inverters, like motor drive inverter, switching
mode power supply, induction heating, and high-power
DC-DC converter applications.
8-SOP
Ordering Information
Part Number
FAN73932M
FAN73932MX
Package
8-SOP
Operating
Temperature Range
-40°C to +125°C
Eco Status
RoHS
Packing Method
Tube
Tape & Reel
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2008 Fairchild Semiconductor Corporation
FAN73932 • Rev. 1.0.0
www.fairchildsemi.com
|
| |
 
Electrical Characteristics
VBIAS(VDD, VBS)=15.0V, COM=0V, and TA = 25°C, unless otherwise specified. The VIN and IIN parameters are
referenced to COM and are applicable to the respective input leads: IN and SD. The VO and IO parameters are
referenced to COM and are applicable to the respective output leads: HO and LO.
Symbol
Characteristics
Test Condition
Min. Typ. Max. Unit
POWER SUPPLY SECTION
IQDD
IQBS
IPDD
Quiescent VDD Supply Current
Quiescent VBS Supply Current
Operating VDD Supply Current
VIN=0V, SD=5V
VIN=0V or 5V, SD=5V
fIN=20KHz, No Load,
SD=5V
IPBS Operating VBS Supply Current
CL=1nF, fIN=20KHz, rms,
SD=5V
ISD Shutdown mode Supply Current
ILK Offset Supply Leakage Current
BOOTSTRAPPED SUPPLY SECTION
SD=0V, SD=5V
VB=VS=600V
VDDUV+ VDD and VBS Supply Under-Voltage
VBSUV+ Positive Going Threshold Voltage
VDDUV- VDD and VBS Supply Under-Voltage
VBSUV- Negative Going Threshold Voltage
VDDUVH- VDD and VBS Supply Under-Voltage Lockout
VBSUVH Hysteresis Voltage
INPUT LOGIC SECTION
VDD =VBS=Sweep
VDD =VBS=Sweep
VDD=VBS=Sweep
VIH Logic “1” Input Voltage for HO & Logic “0” for LO
VIL Logic “0” Input Voltage for HO & Logic “1” for LO
IIN+ Logic Input High Bias Current
VIN=5V, SD=0V
IIN- Logic Input Low Bias Current
VIN=0V, SD=5V
RIN Logic Input Pull-Down Resistance
VSDCLAMP Shutdown (SD) Input Clamping Voltage
www.DataSheetS4UD.+com Shutdown (SD) input Positive-Going Threshold
SD- Shutdown (SD) input Negative-Going Threshold
RPSD Shutdown (SD) Input Pull-Up Resistance
GATE DRIVER OUTPUT SECTION
VOH High-level Output Voltage (VBIAS - VO)
No Load
VOL Low-level Output Voltage
No Load
IO+ Output High, Short-Circuit Pulsed Current(5) VHO=0V, VIN=5V, PW ≤10µs
IO-
Output Low, Short-Circuit Pulsed Current(5)
VHO=15V,VIN=0V, PW
≤10µs
VS
Allowable Negative VS Pin Voltage for IN Signal
Propagation to HO
Note:
5 These parameters guaranteed by design.
8
7.4
2.5
2.5
1.5
1.5
320 700 μA
50 120 μA
700 1300 μA
420 800 μA
400 800 µA
10 μA
9 10 V
8.4 9.4 V
0.6 V
V
0.8 V
25 60 μA
3 μA
200 KΩ
5.0 5.5 V
V
0.8 V
200 KΩ
1.5 V
100 mV
2.0 A
2.0 A
-9.8 -7.0 V
© 2008 Fairchild Semiconductor Corporation
FAN73932 • Rev. 1.0.0
www.fairchildsemi.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for FAN73932 electronic component. |
| Information | Total 14 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ FAN73932.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | Manufacturers |
| FAN7393 | The function is Half-Bridge Gate Drive IC. | Fairchild Semiconductor |
| FAN73932 | The function is Half-Bridge Gate Drive IC. | Fairchild Semiconductor |
| FAN73933 | The function is Half-Bridge Gate Drive IC. | Fairchild Semiconductor |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
FAN7
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||