DataSheet39.com

What is RFM01?

This electronic component, produced by the manufacturer "Hope RF", performs the same function as "ISM Band FSK Receiver Module".


RFM01 Datasheet PDF - Hope RF

Part Number RFM01
Description ISM Band FSK Receiver Module
Manufacturers Hope RF 
Logo Hope RF Logo 


There is a preview and RFM01 download ( pdf file ) link at the bottom of this page.





Total 7 Pages



Preview 1 page

No Preview Available ! RFM01 datasheet, circuit

www.DataSheet4U.com
ISM BAND FSK RECEIVER MODULE
RFM01
Datasheet REV1.2
RFM01
the purpose of this spec covers mainly for the physical
characteristic of the module, for register configure and its
related command info please refer to RF01 data sheets
General Introduction
RFM01
RFM01 is a low costing ISM band receiver module
implemented with unique PLL and zero IF design approach.
It works with FSK modulated signal ranges from
315/433/868/915MHZ bands, comply with FCC, ETSI
regulation. The SPI interface is used to communicate with
microcontroller for parameter setting. RFM01 works with
RFM02 transmitter module. At 433MHZ band, the pair of
module can work up to 300m in the free open air.
Features:
• Low costing, high performance and price ratio
• Tuning free during production
• FSK reception
• PLL and zero IF technology
• Fast PLL lock time
• High resolution PLL with 2.5 KHz step
• High data rate (up to 115.2 kbps with internal demodulatorwith external RC filter highest data rate is
256 kbps)
• Differential antenna input
• Automatic antenna tuning
• Programmable receiver bandwidth (from 67 to 400 kHz)
• Analog and digital signal strength indicator (ARSSI/DRSSI)
• AFC
• DQD
• Internal demodulator
• SPI interface
• Clock and reset signal output for external MCU use
• 16 bits FIFO
• Low power mode (<0.5mA averaged current consumption)
• 10MHz crystal for PLL timing
• Wakeup timer
• Low battery detection
• Programmable capacitor bank
• 2.2V - 5.4V power supply
• Low power consumption
• Stand by current less than 0.3uA
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http://www.hoperf.com

line_dark_gray
RFM01 equivalent
www.DataSheet4U.com
RFM01
Datasheet REV1.2
Field testing range
Band
Test condition
433MHz band
Receiver bandwidth =134KHz, data rate=1.2kbps, transmitter
modulation=60KHZmatches with RF02B
In free open area
868MHz band
Receiver bandwidth=134KHz,data rate =1.2kbps
Transmitter modulation=60KHZmatches with RFM02Bin free
open area
Distance
>200M
>200M
915MHz band
Receiver bandwidth=134KHz,data rate =1.2kbps
Transmitter modulation=60KHZmatches with RFM02Bin free
open area
>200M
Mechanical Dimension
units in mm
SMD PACKAGES1
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http://www.hoperf.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RFM01 electronic component.


Information Total 7 Pages
Link URL [ Copy URL to Clipboard ]
Download [ RFM01.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
RFM01The function is ISM Band FSK Receiver Module. Hope RFHope RF
RFM01The function is Universal ISM Band FSK Receiver. HOPERFHOPERF
RFM02The function is Universal ISM Band FSK Transmitter. HOPERFHOPERF

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

RFM0     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search