DataSheet39.com

What is LM3554?

This electronic component, produced by the manufacturer "National Semiconductor Corporation", performs the same function as "1.2A Dual Flash LED Driver System".


LM3554 Datasheet PDF - National Semiconductor Corporation

Part Number LM3554
Description 1.2A Dual Flash LED Driver System
Manufacturers National Semiconductor Corporation 
Logo National Semiconductor Corporation Logo 


There is a preview and LM3554 download ( pdf file ) link at the bottom of this page.





Total 4 Pages



Preview 1 page

No Preview Available ! LM3554 datasheet, circuit

www.DataSheet4U.com
LM3554 PRODUCT BRIEF
June 8, 2009
Synchronous Boost Converter with 1.2A Dual High Side
LED Drivers and I2C Compatible Interface
General Description
The LM3554 is a 2 MHz fixed frequency, current mode syn-
chronous boost converter. The device is designed to operate
as a dual 600mA (1.2A total) constant current driver for high
current white LEDs, or as a regulated 4.5V or 5V voltage
source.
The dual high side current sources allow for grounded cath-
ode LED operation. An adaptive regulation method ensures
the current source for each LED remains in regulation and
maximizes efficiency.
The main features include: an I2C compatible interface for
controlling the LED current or the desired output voltage, a
hardware Flash enable input for direct triggering of the Flash
pulse, and dual TX inputs which force the Flash pulse into a
low current Torch mode allowing for synchronization to RF
power amplifier events or other high current conditions. Ad-
ditionally, an active high hardware enable (HWEN) input pro-
vides a hardware shutdown during system software failures.
Five protection features are available within the LM3554 in-
cluding a software selectable input voltage monitor, an inter-
nal comparator, for interfacing with an external temperature
sensor, four selectable current limits to ensure the battery
current is kept below a predetermined peak level, an over-
voltage protection feature to keeps the output voltage below
the OVP threshold in case of an open LED, and an output
short circuit protection which limits the output current during
an output short to GND. Additionally, the device provides var-
ious fault indicators including: a thermal fault flag indicating
the LED temperature has tripped the thermal threshold, a flag
indicating a TX event has occured, a flag indicating the flash
timeout counter has expired, a flag indicating the devices die
temperature has reached the thermal shutdown threshold,
and a flag indicating an open or short LED.
Notice: This document is not a full datasheet. For more
imformation regarding this product, or to order samples,
please contact your National Semiconductor sales office
or visit http://www.national.com/support/dir.html.
Features
Dual High Side Current Sources
Grounded Cathode Allowing for Better Heatsinking and
LED Routing
>90% Efficiency
Ultra-Small Solution Size: < 23mm2
Four Operating Modes: Torch, Flash, LED Indicator and
Voltage Output
Accurate and Programmable LED Current from 37.5mA to
1.2A
Programmable 4.5V or 5.0V Constant Output Voltage
Hardware Flash and Torch Enable
LED Thermal Sensing and Current Scaleback
Software Selectable Input Voltage Monitor
Programmable Flash Timeout
Dual Synchronization Inputs for RF Power Amplifier Pulse
Events
Open and Short LED Detection
Active High Hardware Enable for Protection Against
System Faults
400kHz I2C Compatible Interface
16-Bump (1.7mm × 1.7mm × 0.6mm) µSMD
Applications
Camera Phone LED Flash Controller
Class D Audio Amplifier Power
LED Current Source Biasing
© 2009 National Semiconductor Corporation 300420
www.national.com


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for LM3554 electronic component.


Information Total 4 Pages
Link URL [ Copy URL to Clipboard ]
Product Image
and Detail view

LM3554 datasheet


1. Datasheet - Synchronous Boost Converter

[ Learn More ]




Download [ LM3554.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
LM3550The function is 5A Flash LED Drvr w/Auto Vf ESR Det for Mob Cam Sys (Rev. B). Texas InstrumentsTexas Instruments
LM3550The function is 5A Flash LED Driver. National Semiconductor CorporationNational Semiconductor Corporation
LM3551The function is LM3551 / LM3552 1A White LED Driver with Flash Timeout Protection (Rev. D). Texas InstrumentsTexas Instruments

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

LM35     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search