|
|
PDF MSP4440G Data sheet ( Hoja de datos )
| Número de pieza | MSP4440G | |
| Descripción | Multistandard Sound Processor | |
| Fabricantes | Micronas Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MSP4440G (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
MICRONAS
PRELIMINARY DATA SHEET
MSP 44x0G
Multistandard
Sound Processor Family
Edition May 16, 2001
6251-533-1PD
MICRONAS
1 page  
PRELIMINARY DATA SHEET
www.DataSheet4U.com
Contents, continued
Page
Section Title
98 7.
Appendix D: Application Information
98 7.1. Exclusions of Audio Baseband Features
98 7.2. Phase Relationship of Analog Outputs
98 7.3. Compatibility Restrictions to MSP 34x0D
99 7.4. Application Circuit
100 8.
Appendix E: MSP 44x0G Version History
100 9.
Data Sheet History
MSP 44x0G
License Notice:
“Dolby Pro Logic” and “Dolby Digital” are trademarks of Dolby Laboratories.
Supply of this implementation of Dolby Technology does not convey a license nor imply a right under any patent, or any other industrial or intel-
lectual property right of Dolby Laboratories, to use this implementation in any finished end-user or ready-to-use final product. Companies plan-
ning to use this implementation in products must obtain a license from Dolby Laboratories Licensing Corporation before designing such products.
Micronas
5
5 Page 
PRELIMINARY DATA SHEET
www.DataSheet4U.com
2.1. Architecture of the MSP 44x0G Family
Fig. 2–1 on page 10 shows a simplified block diagram
of the IC. The block diagram contains all features of
the MSP 4450G. Other members of the MSP 44x0G
family do not have the complete set of features: The
demodulator handles only a subset of the standards
presented in the demodulator block; NICAM process-
ing is only possible in the MSP 4410G and
MSP 4450G.
2.2. Sound IF Processing
2.2.1. Analog Sound IF Input
The input pins ANA_IN1+, ANA_IN2+, and ANA_IN−
offer the possibility to connect two different sound IF
(SIF) sources to the MSP 44x0G. The analog-to-digital
conversion of the preselected sound IF signal is done
by an A/D-converter. An analog automatic gain circuit
(AGC) allows a wide range of input levels. The high-
pass filters formed by the coupling capacitors at pins
ANA_IN1+ and ANA_IN2+ (see Section 7.4. “Applica-
tion Circuit” on page 99) are sufficient in most cases to
suppress video components. Some combinations of
SAW filters and sound IF mixer ICs, however, show
large picture components on their outputs. In this case,
further filtering is recommended.
2.2.2. Demodulator: Standards and Features
The MSP 44x0G is able to demodulate all TV-sound
standards worldwide including the digital NICAM sys-
tem. Depending on the MSP 44x0G version, the fol-
lowing demodulation modes can be performed:
A2 Systems: Detection and demodulation of two sep-
arate FM carriers (FM1 and FM2), demodulation and
evaluation of the identification signal of carrier FM2.
NICAM Systems: Demodulation and decoding of the
NICAM carrier, detection and demodulation of the ana-
log (FM or AM) carrier. For D/K-NICAM, the FM carrier
may have a maximum deviation of 384 kHz.
Very high deviation FM-Mono: Detection and robust
demodulation of one FM carrier with a maximum devi-
ation of 540 kHz.
BTSC-Stereo: Detection and FM demodulation of the
aural carrier resulting in the MTS/MPX signal. Detec-
tion and evaluation of the pilot carrier, AM demodula-
tion of the (L−R)-carrier and detection of the SAP sub-
carrier. Processing of DBX noise reduction or
Micronas Noise Reduction (MNR).
MSP 44x0G
BTSC-Mono + SAP: Detection and FM demodulation
of the aural carrier resulting in the MTS/MPX signal.
Detection and evaluation of the pilot carrier, detection
and FM demodulation of the SAP subcarrier. Process-
ing of DBX noise reduction or Micronas Noise Reduc-
tion (MNR).
Japan Stereo: Detection and FM demodulation of the
aural carrier resulting in the MPX signal. Demodulation
and evaluation of the identification signal and FM
demodulation of the (L−R)-carrier.
FM-Satellite Sound: Demodulation of one or two FM
carriers. Processing of high-deviation mono or narrow
bandwidth mono, stereo, or bilingual satellite sound
according to the ASTRA specification.
FM-Stereo-Radio: Detection and FM demodulation of
the aural carrier resulting in the MPX signal. Detection
and evaluation of the pilot carrier and AM demodula-
tion of the (L−R)-carrier.
The demodulator blocks of all MSP 44x0G versions
have identical user interfaces. Even completely differ-
ent systems like the BTSC and NICAM systems are
controlled the same way. Standards are selected by
means of MSP Standard Codes. Automatic processes
handle standard detection and identification without
controller interaction. The key features of the
MSP 44x0G demodulator blocks are:
Standard Selection: The controlling of the demodula-
tor is minimized: All parameters, such as tuning fre-
quencies or filter bandwidth, are adjusted automati-
cally by transmitting one single value to the
STANDARD SELECT register. For all standards, spe-
cific MSP standard codes are defined.
Automatic Standard Detection: If the TV sound stan-
dard is unknown, the MSP 44x0G can automatically
detect the actual standard, switch to that standard, and
respond the actual MSP standard code.
Automatic Carrier Mute: To prevent noise effects or
FM identification problems in the absence of an FM
carrier, the MSP 44x0G offers a configurable carrier
mute feature, which is activated automatically if the TV
sound standard is selected by means of the STAN-
DARD SELECT register. If no FM carrier is detected at
one of the two MSP demodulator channels, the corre-
sponding demodulator output is muted. This is indi-
cated in the STATUS register.
Micronas
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MSP4440G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MSP4440G | Multistandard Sound Processor | Micronas Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |