|
|
Número de pieza | TD2410 | |
Descripción | (TD2410 / TD2425) Zero Cross0.04-25 Amps RMS24-280 Volts RMS3-32 Control - Volts DC | |
Fabricantes | Crydom Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TD2410 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Series T
10-25Amp • 120/240Vac • AC Output
• Zero Voltage Switching
• Panel Mount
• 600V Transient Capability
• Internal Snubber
• DC or AC Control
• Triac Output
Featuring state-of-the-art Surface
Mount Technology, these SPST-NO
relays deliver proven reliability in the
most demanding applications.
Manufactured in CrydomÕs ISO 9001
Certified facility for optimum product
performance and reliability.
www.DataSheet4U.comM O D E L N U M B E R S
OUTPUT SPECIFICATIONS ➀
AC CONTROL
D C CONTROL
Operating Voltage (47-63 Hz) [Vrms]
Max. Load Current ➂ [Arms]
Min. Load Current, [mArms]
Transient Overvoltage [Vpk]
Max. Surge Current, (16.6ms) [Apk]
Max. On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (RθJC) [˚C/W]
Maximum I 2 t for Fusing, (8.3 msec.) [A 2sec]
Max. Off-State Leakage Current @ Rated Voltage [mArms]
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁
Max. Turn-On Time
Max. Turn-Off Time
Power Factor (Min.) with Max. Load
TA1210
TD1210
TA1225
TD1225
TA2410
TD2410
TA2425
TD2425
24-140
24-140
24-280
24-280
10 25 10 25
40 40 40 40
400 400
600 600
120 250
120 250
1.6 1.6
1.6 1.6
1.48 1.02 1.48 1.02
60 260 60 260
88
10 10
200 200
200 200
1/2 Cycle (DC Control), 10.0 msec (AC Control)
1/2 Cycle (DC Control), 40.0 msec(AC Control)
0.5 0.5 0.5 0.5
INPUT SPECIFICATIONS➀
DC CONTROL
AC CONTROL
Control Voltage Range
3-32 Vdc
90-280 Vrms (60Hz)
Max. Reverse Voltage
-32 Vdc
---
Max. Turn-On Voltage
3.0 Vdc
90 Vrms
Min. Turn-Off Voltage
1.0 Vdc
10 Vrms
Nominal Input Impedance
1500 Ohms
60K Ohms
Typical Input Current
3.4mA @ 5 Vdc, 20mA @ 28Vdc 2mA @ 120 Vrms, 4mA @ 240 Vrms
GENERAL NOTES
➀ All parameters at 25˚ C unless otherwise specified.
➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
➂ Heat sinking required, for derating curves see page 3.
© 2002 CRYDOM CORP, Specifications subject to change without notice.
Series T
Rev. 111402
Page 1 OF 2
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
UK: +44 (0)1202 365070 ¥FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
GERMANY: +49 (0)180 3000 506
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet TD2410.PDF ] |
Número de pieza | Descripción | Fabricantes |
TD2410 | (TD2410 / TD2425) Zero Cross0.04-25 Amps RMS24-280 Volts RMS3-32 Control - Volts DC | Crydom Corporation |
TD2410 | Panel Mount | Crydom |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |