DataSheet39.com

What is iT2001P?

This electronic component, produced by the manufacturer "Iterra", performs the same function as "1 to 20 GHz medium gain high-power amplifier".


iT2001P Datasheet PDF - Iterra

Part Number iT2001P
Description 1 to 20 GHz medium gain high-power amplifier
Manufacturers Iterra 
Logo Iterra Logo 


There is a preview and iT2001P download ( pdf file ) link at the bottom of this page.





Total 5 Pages



Preview 1 page

No Preview Available ! iT2001P datasheet, circuit

Description
www.DataSheet4U.com
iT2001P
1 to 20 GHz Medium Gain
High-Power Amplifier
The iT2001P is a broadband packaged amplifier designed for high output power
applications. It provides saturated output power of 1 W up to 7 GHz and greater than 29
dBm up to 14 GHz. Typical gain of 13 dB is provided across the bandwidth. DC power
consumption of 5.4 W is obtained in bias condition for best output power and good linear
performance. Input and output ports are DC coupled. The iT2001P is fabricated using
pHEMT technology with MBE, Ti-Pt-Au gate metallization, silicon nitride passivation, and
polymide for scratch protection. Full passivation of the active area and above air bridges
provides very high reliability. The package base is made of copper to minimize thermal
resistance while also ensuring compatibility between materials. The feedthroughs are
realized on a ceramic frame to achieve excellent broadband performance.
Features
™ Bandwidth: 1 GHz – 20 GHz
™ Psat (1 GHz – 7 GHz): 30 dBm nominal
™ Psat (7 GHz – 14 GHz): > 29 dBm nominal
™ Psat (14 GHz – 20 GHz): > 26 dBm nominal
™ Gain: 13 dB nominal
™ DC bias conditions: 9 V at 600 mA
™ Ceramic flange-mount package
Absolute
Maximum
Ratings
(1. Combination of
positive supply
voltage and
supply current per
stage (Vd1 x Id1)
shall not exceed
50% of maximum
total power
dissipation (5 W)
Symbol
Vd1
Vd2
Vg21 and Vg22
Vd1- Vg11
Vd2 - Vg12
Vg11
Id1
Id2
Ig1
Pin
Pdiss_DC
Tch
Tm
Tst
Parameters/conditions
Power supply voltage first stage (1)
Positive supply voltage second stage (1)
Positive supply voltage (gate)
Gate to drain voltage
Gate to drain voltage
Negative supply voltage
Positive supply current first stage (1)
Positive supply current second stage (1)
Negative supply current
RF input power
Total DC power dissipation (no RF)
Operating channel temperature
Mounting temperature (30 s)
Storage temperature
Min.
-3
-2
-65
Max.
11
11
5
12
12
0
800
800
3.2
21
10
150
320
150
Units
V
V
V
V
V
mA
mA
mA
dBm
W
°C
°C
°C
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
Nov. 11, 2004, Doc.1176 Rev 3.3
Page 1
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938

line_dark_gray
iT2001P equivalent
Performance
Characteristics
www.DataSheet4U.com
iT2001P
1 to 20 GHz Medium Gain
High-Power Amplifier
iT2001P Gain Performance
32
29
26
23
20
17
14
11
8
5
2
-1
-4
-7
-10
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Freq. (GHz)
iT2001P Return Loss Performance
10
5
0
-5
-10
-15
-20
-25
-30
-35 S11
-40 S22
-45
-50
0 2 4 6 8 10 12 14 16 18 20 22 24
Freq. (GHz)
Biasing
Procedure
iT2001P Isolation
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Freq. (GHz)
iT2001P Power Performance
42
40
38 P1dB
36 P3dB
34
32
30
28
26
24
22
20
18
16
14
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Freq. (GHz)
The iT2001P amplifier is biased with two positive drain supplies (Vd1 and Vd2) and one
negative gate supply (Vg11 ). The bias Vg11 controls the drain current of two independent
cascaded stages. The recommended bias condition for the iT2001P is Vd1= Vd2 = 9.0 V,
IDQ1 = 300 mA and IDQ2 = 300 mA . To achieve this drain current level, Vg11 is typically
biased between –0.7 V and –0.9 V.
Vd1 and Vd2 must be isolated by the bias supply by means of bypass capacitors of 100 µF.
These two biases can be applied independently. The gate voltage (Vg11 ) MUST be
applied prior to the drain voltages (Vd1 and Vd2) during power up and removed after the
drain voltage is removed during the power down. Vg21 and Vg22 are two positive voltage
applied to the gate of a cascode configuration of two different gain stages. For normal
operation an external bias of Vg21 and Vg22 = +4 V are required (Vd1,2 =9 V, Vg11=-0.7 V).
The iT2001P is DC coupled at both RF input and output ports.
Handling
and
Mounting
Thin gold solder is recommended for circuit board mounting. The device is susceptible to
electrostatic discharge, so preventive measures should be taken during handling and
mounting to avoid damage to the chip.
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
Nov. 11, 2004, Doc.1176 Rev 3.3
Page 5
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for iT2001P electronic component.


Information Total 5 Pages
Link URL [ Copy URL to Clipboard ]
Download [ iT2001P.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
iT2001PThe function is 1 to 20 GHz medium gain high-power amplifier. IterraIterra

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

iT20     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search