|
|
Número de pieza | ASMT-FJ10-ADH00 | |
Descripción | Surface Mount AF Lamp | |
Fabricantes | AVAGO TECHNOLOGIES | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ASMT-FJ10-ADH00 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! ASMT-FJ10-ADH00
Surface Mount AF Lamp
Data Sheet
Descriptions
Avago Technologies’ ASMT-FJ10-ADH00 is a SMT (Sur-
www.DataSheet4Uf.accoemMount Technology) dome lamp uses an untinted,
nondiffused lens to provide a high luminous intensity
within a narrow radiation pattern. The device is made
by encapsulating LED chip on axial lead frame to form
molded epoxy lamp package with 6 bended leads for
surfacing mounting.
This lamp type LED utilize Aluminum Indium Gallium
Phosphide (AlInGaP) material technology. The AlInGaP
material has a very high luminous efficiency, capable of
producing high light output over a wide range of drive
currents. The color available for this SMT Lamp package
is 605nm Orange.
This narrow angle SMT lamp package is designed for
applications that require long distance illumination and
narrow beam pattern such as auxiliary flash for auto-fo-
cus function in digital still camera etc. In order to facili-
tate pick and place operation, this SMT Lamp is shipped
in tape and reel, with 1000 units per reel. This package is
compatible with Pb-free IR soldering process.
Eye Safety
These orange Surface Mount AF Lamp are use for camera
application. The LEDs have lenses, which focus the beam
at about 10mm from the front of the lens, from where the
beam diverges relatively slowly. If the LEDs were placed
in a product, they would create a Class 1 LED to IEC/EN
60825-1 (2001) under all conditions of operation & single
fault failure. As long as no collimating optics are added
to the optical path.
Features
• Smooth, Consistent Narrow Radiation Pattern
• 8° View Angle
• 4.8 L x 4.8 X 5.33H mm Package Dimension
• Good Intensity Output
• Compatible with IR Solder Reflow
• Available in 16mm tape on 15" (380mm) Diameter
reels
• Clear, Non-diffused Epoxy
• IEC/EN 60825-1 Eye Safety Class 1
• RoHS Compliant
Applications
• Camera
CAUTION: ASMT-FJ10 LEDs are Class 1 ESD sensitive. Please observe appropriate precautions during
handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details.
1 page 12.00 ± 0.10
4.00 ± 0.10
16.0 +-00..1300
www.DataSheet4U.com
2.00 ± 0.10
∅ 1.50 ± 0.10
1.75 ± 0.10
7.50 ± 0.10
∅ 1.50 ± 0.25
0.400 ± 0.02
6˚ MAX.
4.95 ± 0.10
Figure 10. Tape Dimensions
10˚ MAX.
5.34 ± 0.10
END START
5.40 ± 0.10
5˚ MAX.
THERE SHALL BE A
MINIMUM OF 600 mm
(23.6 ") OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 ") OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm(9.05 ")
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Figure 11. Tape Leader and Trailer Dimensions
There shall be a minimum of 600mm (23.6”) of empty component pockets sealed with cover tape
Notes:
1. All dimensions in millimeters.
2. Tolerance is ± 0.1 mm unless otherwise specified.
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet ASMT-FJ10-ADH00.PDF ] |
Número de pieza | Descripción | Fabricantes |
ASMT-FJ10-ADH00 | Surface Mount AF Lamp | AVAGO TECHNOLOGIES |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |